Description
DS-K1108MK card reader with code keys, MiFare
The DS-K1108MK is a card reader with code keys from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand.
The attractively designed card reader can be used both indoors and outdoors. It reads MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers.
EM vs MiFare
Hikvision offers card readers with the option to read EM or MiFare. This option is integrated into the reader and cannot be adjusted through software. MiFare offers stronger encryption. If other EM solutions are already available, EM can also be selected.
RS-485 vs Wiegand
Hikvision card readers such as the DS-K1108EK are equipped with connection options for both Wiegand and RS-485.
Wiegand has the potential disadvantage of requiring more wires (7) to achieve the correct connection. However, after this, no further programming is required in the reader, and everything can be configured via the software.
RS-485 has the advantage of requiring fewer wires (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. RS-485 also allows for a bus configuration instead of a star topology. For this reason, however, with RS-485, it is necessary to assign the readers their corresponding address via DIP switches. The order affects the configuration options and therefore requires careful consideration when configuring. Readers designated as incoming are assigned odd numbers, while readers used for exiting the protected zone are assigned even numbers.
Specifications:
Wiegand connection - RS-485 connection.
- 32-bit high-speed processor
- Reading distance 3-5cm
- Built-in audio indicator
- LED status indicator
- RS485 and Wiegand(W26/W34) protocol;
- Sabotage alarm;
- Online upgrade function (if connected via 485)
- MiFare recognition and card reading
