Hikvision lezers

DS-K1108E card reader, EM The DS-K1108E is a card reader from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The attractively designed card reader can be used both indoors and outdoors. It reads EM cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers. EM vs MiFare Hikvision offers card readers with the option to read EM or MiFare. This option is integrated into the reader and cannot be adjusted through software. MiFare offers stronger encryption. If other EM solutions are already available, EM can also be selected. RS-485 vs Wiegand Hikvision card readers such as the DS-K1104M are equipped with connection options for both Wiegand and RS-485. Wiegand has the potential disadvantage of requiring more wires (7) to achieve the correct connection. However, after this, no further programming is required in the reader, and everything can be configured via the software. RS-485 has the advantage of requiring fewer wires (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. RS-485 also allows for a bus configuration instead of a star topology. For this reason, however, with RS-485, it is necessary to assign the readers their corresponding address via DIP switches. The order affects the configuration options and therefore requires careful consideration when configuring. Readers designated as incoming are assigned odd numbers, while readers used for exiting the protected zone are assigned even numbers. Specifications: Wiegand connection - RS-485 connection. - 32-bit high-speed processor - Reading distance 3-5cm - Built-in audio indicator - LED status indicator - RS485 and Wiegand(W26/W34) protocol; - Sabotage alarm; - Online upgrade function (if connected via 485) - EM recognition and card reading

Read more less

DS-K1108EK card reader with code keys, EM The DS-K1108EK is a card reader with code keys from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The attractively designed card reader can be used both indoors and outdoors. It reads MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers. EM vs MiFare Hikvision offers card readers with the option to read EM or MiFare. This option is integrated into the reader and cannot be adjusted through software. MiFare offers stronger encryption. If other EM solutions are already available, EM can also be selected. RS-485 vs Wiegand Hikvision card readers such as the DS-K1108EK are equipped with connection options for both Wiegand and RS-485. Wiegand has the potential disadvantage of requiring more wires (7) to achieve the correct connection. However, after this, no further programming is required in the reader, and everything can be configured via the software. RS-485 has the advantage of requiring fewer wires (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. RS-485 also allows for a bus configuration instead of a star topology. For this reason, however, with RS-485, it is necessary to assign the readers their corresponding address via DIP switches. The order affects the configuration options and therefore requires careful consideration when configuring. Readers designated as incoming are assigned odd numbers, while readers used for exiting the protected zone are assigned even numbers. Wiegand connection - RS-485 connection. Specifications: - 32-bit high-speed processor - Reading distance 3-5cm - Built-in audio indicator - LED status indicator - RS485 and Wiegand(W26/W34) protocol; - Sabotage alarm; - Online upgrade function (if connected via 485) - EM recognition and card reading

Read more less

DS-K1108MK card reader with code keys, MiFare The DS-K1108MK is a card reader with code keys from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The attractively designed card reader can be used both indoors and outdoors. It reads MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers. EM vs MiFare Hikvision offers card readers with the option to read EM or MiFare. This option is integrated into the reader and cannot be adjusted through software. MiFare offers stronger encryption. If other EM solutions are already available, EM can also be selected. RS-485 vs Wiegand Hikvision card readers such as the DS-K1108EK are equipped with connection options for both Wiegand and RS-485. Wiegand has the potential disadvantage of requiring more wires (7) to achieve the correct connection. However, after this, no further programming is required in the reader, and everything can be configured via the software. RS-485 has the advantage of requiring fewer wires (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. RS-485 also allows for a bus configuration instead of a star topology. For this reason, however, with RS-485, it is necessary to assign the readers their corresponding address via DIP switches. The order affects the configuration options and therefore requires careful consideration when configuring. Readers designated as incoming are assigned odd numbers, while readers used for exiting the protected zone are assigned even numbers. Specifications: Wiegand connection - RS-485 connection. - 32-bit high-speed processor - Reading distance 3-5cm - Built-in audio indicator - LED status indicator - RS485 and Wiegand(W26/W34) protocol; - Sabotage alarm; - Online upgrade function (if connected via 485) - MiFare recognition and card reading

Read more less

DS-K1107AE | Access Control Key features Equipped with the 32-bit high-speed processor RS-485 and Wiegand (W26/W34) protocol and OSDP protocol Built-in EM card reader module (Frequency: 125KHz) Supports tamper alarm Built-in buzzer to identify reading status Online upgrade function Watchdog design to repair itself in case of an exception, ensuring the long life of the reader

Read more less

DS-K1104M, Vandal-proof card reader, MiFare The DS-K1104M is a vandal-resistant card reader from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The attractively designed card reader can be used both indoors and outdoors. It reads MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers. RS-485 vs Wiegand Hikvision card readers such as the DS-K1104M are equipped with connection options for both Wiegand and RS-485. Wiegand has the potential disadvantage of requiring more wires (7) to achieve the correct connection. However, after this, no further programming is required in the reader, and everything can be configured via the software. RS-485 has the advantage of requiring fewer wires (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. RS-485 also allows for a bus configuration instead of a star topology. For this reason, however, with RS-485, it is necessary to assign the readers their corresponding address via DIP switches. The order affects the configuration options and therefore requires careful consideration when configuring. Readers designated as incoming are assigned odd numbers, while readers used for exiting the protected zone are assigned even numbers. Specifications: Wiegand connection - RS-485 connection. - 32-bit high-speed processor - Reading distance 3-5cm - Built-in audio indicator - LED status indicator - RS485 and Wiegand(W26/W34) protocol; - Sabotage alarm; - Online upgrade function (if connected via 485 - Dust and waterproof - Mifare recognition and card reading

Read more less

DS-K1104MK, Vandal-proof card reader with code keys, MiFare The DS-K1104M is a vandal-resistant card reader from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The attractively designed card reader can be used both indoors and outdoors. It reads MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers. RS-485 vs Wiegand Hikvision card readers such as the DS-K1104M are equipped with connection options for both Wiegand and RS-485. Wiegand has the potential disadvantage of requiring more wires (7) to achieve the correct connection. However, after this, no further programming is required in the reader, and everything can be configured via the software. RS-485 has the advantage of requiring fewer wires (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. RS-485 also allows for a bus configuration instead of a star topology. For this reason, however, with RS-485, it is necessary to assign the readers their corresponding address via DIP switches. The order affects the configuration options and therefore requires careful consideration when configuring. Readers designated as incoming are assigned odd numbers, while readers used for exiting the protected zone are assigned even numbers. Specifications: Wiegand connection - RS-485 connection. - 32-bit high-speed processor - Reading distance 3-5cm - Built-in audio indicator - LED status indicator - RS485 and Wiegand(W26/W34) protocol; - Sabotage alarm; - Online upgrade function (if connected via 485 - Dust and waterproof - Mifare recognition and card reading

Read more less

DS-K1201MF, Fingerprint Card Reader MiFare Please note: To read fingerprints and cards you must use the DS-K1F820-F recording module. The DS-K1201MF is a fingerprint card reader from Hikvision's access control line. The reader is designed with a 32-bit high-speed processor and includes an optical fingerprint recognition module. It communicates with the access control system via the RS-485 protocol. The reader is IP65-rated, making it suitable for outdoor use. The reader can read MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers.

Read more less

DS-K1107AM Card Reader MiFare The DS-K1107AM is a card reader from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The attractively designed card reader can be used both indoors and outdoors. It reads MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers. EM vs MiFare Hikvision offers card readers with the option to read EM or MiFare. This option is integrated into the reader and cannot be adjusted through software. MiFare offers stronger encryption. If other EM solutions are already available, EM can also be selected. Product Info

Read more less

Key Features: Supports RS-485, Wiegand (W26, W34) protocol and OSDP protocol Supports reading of Mifare Tamper-proof function Built-in buzzer for status indication

Read more less

Hikvision DS-K1107AMK MiFare Card Reader + Code Keys The DS-K1107AMK is a card reader from Hikvision's access control line that also features code keys to open a door or gate. The card reader can be connected via RS-485 or Wiegand. The attractively designed card reader can be used both indoors and outdoors. It reads MiFare cards and can be connected to Hikvision's Basic+ and Pro Complete door controllers. EM vs MiFare Hikvision offers card readers with the option to read EM or MiFare. This option is integrated into the reader and cannot be adjusted through software. MiFare offers stronger encryption. If other EM solutions are already available, EM can also be selected. Key features Features Brand: Hikvision Model: DS-K1107AMK ID settings: setting with the DIP switch on the motherboard Card reading distance: EM card: ≤100 mm (≤3.94″) Mifare card: ≤50 mm (≤1.97″) Processor: 32-bit Keyboard: No keyboard (DS-K1107E and DS-K1107M) 12-key (0~9, *, #) keyboard (DS-K1107EK and DS-K1107MK) Communication interface: RS-485 / Wiegand (DIP switch) Audio warning: beeper Power supply: 12VDC Power consumption: ≤2W LED indicator: power indicator; Status LED indicator Temper resistant: support Installation: Wall mounting with screws. The Gang Box is not supported. Protection level: IP 65 Operating humidity: 10% to 90% (non-condensing) Operating temperature: -20°C to +65°C (-4°F to +149°F) Dimensions (L × W × H): 115 × 44 × 22 mm (4.53 × 1.73 × 0.87 in) Color: Gray

Read more less