Description
DS-KV6113-WPE1 Doorbell (C) Stand-alone and/or modular
This doorbell is a standalone device, meaning it can be used without an intercom monitor. The doorbell can be powered via PoE, but be careful not to use the recorder's PoE for this. Instead, use a PoE adapter or a PoE switch. You can save the doorbell's video to your recorder; for this, use the doorbell's IP address and add it to a free channel on your recorder.
Specifications:
- 2 megapixel Full HD camera
- True WDR and IR night vision
- 129 degree horizontal viewing angle
- Tamper alarm and alarm inputs
- Opening the door remotely
- Mifare card reader for opening an electronic door lock
- PoE power supply 48vdc and signal over 1 network cable or WiFi (2.4Ghz) connection in combination with a 12Vdc adapter (see additional products)
- P2P connection, so no port forwarding required
- Weatherproof (IP65)
- Supports microSD cards up to 128 GB
- Two-way communication
- Full network support: WiFi / LAN
- Discovering sabotage – tearing it away from the substrate
- The video intercom is mounted in a surface-mounted housing
