Besides standard positioning in a room corner, it can be installed on a wall surface using the JA-196PL-S mounting box, where the detector is partially recessed and elegantly blends in with the wall. For special applications such as ceiling mounting or an oblique detection angle, the JA-191PL hinged bracket can be used.
The detector is equipped with pulse activation.
The detector can be used to control programmable PG outputs.
The resistance to false alarms can be set to two levels.
The detector offers standard resistance to white light at the level prescribed by the standard (up to 6000 lux).
The detector is addressable and occupies one position in the security system.
| Compatible with |
F-Link 2.0.0 and later |
| Power source |
1x lithium battery, CR123A (3 V / 1500 mAh) |
| Typical lifespan |
4 years (in Smartwatch mode) |
| Communication frequency |
868.1 MHz |
| Communication range |
approx. 300 m (open terrain) |
| Recommended installation height |
2.2 – 2.5 m above floor level |
| Detection angle / detection range |
90° / 12 m |
| Dimensions: |
62 x 110 x 40 mm |
| Classification |
safety level 2/environmental class II, according to EN 50131-1 ed. 2+A1+A2, EN 50131-2-2 |
| Environment according to |
EN 50131-1 II. indoor, general |
| Operating temperature range |
-10 °C to +40 °C |
| This also meets the requirements of |
EN 50131-5-3+A1, EN 50131-6 ed. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581 |
