The detector offers standard resistance to white light, significantly exceeding the values prescribed by the standard (up to 10,000 lux).
The detector meets the highest quality and design standards, making it suitable for even luxurious interiors in all installation versions. In addition to standard positioning in a room corner, it can be installed on a wall surface using the aesthetic JA-196PL-S mounting box, where the detector is partially recessed and elegantly blends in with the wall. For special applications such as ceiling mounting or inclined detection angles, the JA-191PL hinged bracket can be used.
The detector is equipped with pulse activation.
The detector can be used to control programmable PG outputs.
| Compatible with |
F-Link 2.0.0 and later |
| Power source |
1x lithium battery, CR123A (3 V / 1500 mAh) |
| Typical lifespan |
4 years (in Smartwatch mode) |
| Communication frequency |
868.1 MHz |
| Communication range |
approx. 300 m (open terrain) |
| Recommended installation height |
2.2 – 2.5 m above floor level |
| Detection angle / detection range |
90° / 12 m |
| Dimensions: |
62 x 110 x 40 mm |
| Classification |
safety level 2/environmental class II, according to EN 50131-1 ed. 2+A1+A2, EN 50131-2-2 |
| Environment according to |
EN 50131-1 II. indoor, general |
| Operating temperature range |
-10 °C to +40 °C |
| This also meets the requirements of |
EN 50131-5-3+A1, EN 50131-6 ed. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581 |
