Jablotron draadloze detectie
Jablotron draadloze detectie
-
Jablotron JA-151ST-A Wireless smoke and heat detector with dual siren function (intrusion and fire alarm)
Jablotron JA-151ST-A Wireless smoke and heat detector with dual siren function (intrusion and fire alarm) The Jablotron fully wireless smoke and heat detector protects your home and hearth. It is used to detect fire hazards inside residential or commercial buildings. It features a siren that signals a fire alarm, both from the detector itself and from another fire detector in the system. Unique features The smoke detector has a built-in siren that signals fire and burglar alarms. This alert is then shared with all other detectors in the system. The detector communicates wirelessly and is powered by batteries (3x 1.5 V AA). If the detector is operated without being assigned to a control panel or if communication with the control panel is lost, it operates in an autonomous mode (EN 14604). The detector visually indicates a dangerous situation with an integrated light and siren. It can also provide an audible signal: – A fire alarm detected by the detector itself – A fire alarm from the system (alarm triggered by another fire detector) – Other type of alarm (e.g. burglar alarm) – For alarms reported by the system, sections can be set for which the alarm is indicated The product contains two separate detectors – an optical smoke detector and a temperature detector. The optical smoke detector uses the principle of diffused light. It is very sensitive to particles present in thick smoke. It is less sensitive to small particles produced by the combustion of liquids such as alcohol. Therefore, a heat detector is integrated, which responds better to a fire where heat is generated quickly with a small amount of smoke. The fire detectors must be installed by a qualified installer with a valid Jablotron certificate. The detector is not designed for installation in industrial environments. Product Info
€189,84
-
Jablotron JA-152PG, Pro DesignLine Wireless PIR with white-light protection
Jablotron JA-152PG, Pro DesignLine Wireless PIR with white light protection The product is a wireless system device for the Midway Pro and Essex Pro. This detector is designed to detect human body movements in buildings. The guaranteed detection coverage is 90°/12 m. The gray lens option has a white light resistance significantly higher than the values prescribed by the standard. The detector meets the highest quality and design standards, making it suitable even for luxurious interiors. White light resistance helps reduce false alarms caused by illumination through windows, lightning, or reflective objects. The detector offers standard resistance to white light, significantly exceeding the values prescribed by the standard (up to 10,000 lux). The detector meets the highest quality and design standards, making it suitable for even luxurious interiors in all installation versions. In addition to standard positioning in a room corner, it can be installed on a wall surface using the aesthetic JA-196PL-S mounting box, where the detector is partially recessed and elegantly blends in with the wall. For special applications such as ceiling mounting or inclined detection angles, the JA-191PL hinged bracket can be used. The detector is equipped with pulse activation. The detector can be used to control programmable PG outputs. Compatible with F-Link 2.0.0 and later Power source 1x lithium battery, CR123A (3 V / 1500 mAh) Typical lifespan 4 years (in Smartwatch mode) Communication frequency 868.1 MHz Communication range approx. 300 m (open terrain) Recommended installation height 2.2 – 2.5 m above floor level Detection angle / detection range 90° / 12 m Dimensions: 62 x 110 x 40 mm Classification safety level 2/environmental class II, according to EN 50131-1 ed. 2+A1+A2, EN 50131-2-2 Environment according to EN 50131-1 II. indoor, general Operating temperature range -10 °C to +40 °C This also meets the requirements of EN 50131-5-3+A1, EN 50131-6 ed. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581
€152,90
-
Jablotron JA-152P, Pro Designline Wireless PIR
Jablotron JA-152P, Pro Designline Wireless PIR The product is a wireless system device for the Jablotron Midway Pro and Essex Pro. This detector is designed to detect human body movements in buildings. Its guaranteed detection coverage is 90°/12 m. The detector meets the highest quality and design standards, making it suitable even for luxurious interiors. Besides standard positioning in a room corner, it can be installed on a wall surface using the JA-196PL-S mounting box, where the detector is partially recessed and elegantly blends in with the wall. For special applications such as ceiling mounting or an oblique detection angle, the JA-191PL hinged bracket can be used. The detector is equipped with pulse activation. The detector can be used to control programmable PG outputs. The resistance to false alarms can be set to two levels. The detector offers standard resistance to white light at the level prescribed by the standard (up to 6000 lux). The detector is addressable and occupies one position in the security system. Compatible with F-Link 2.0.0 and later Power source 1x lithium battery, CR123A (3 V / 1500 mAh) Typical lifespan 4 years (in Smartwatch mode) Communication frequency 868.1 MHz Communication range approx. 300 m (open terrain) Recommended installation height 2.2 – 2.5 m above floor level Detection angle / detection range 90° / 12 m Dimensions: 62 x 110 x 40 mm Classification safety level 2/environmental class II, according to EN 50131-1 ed. 2+A1+A2, EN 50131-2-2 Environment according to EN 50131-1 II. indoor, general Operating temperature range -10 °C to +40 °C This also meets the requirements of EN 50131-5-3+A1, EN 50131-6 ed. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581
€133,00
-
Jablotron JA-158P Wireless outdoor PIR detector
Jablotron JA-158P Wireless outdoor PIR detector The JA-158P offers stable and accurate detection in outdoor conditions. This outdoor PIR motion detector is based on a dual-sensor motion detector manufactured by OPTEX. The detection range can be adjusted along the optical axis from 1.4 to 12 meters with a coverage angle of 85°. The JA-158P detector is fully wireless and compatible with the JABLOTRON 100 system. It can be assigned to a zone, and it occupies only one position in the alarm system. Product Info
€543,16
-
Jablotron JA-150P Pro wireless PIR pet-friendly
Jablotron JA-150P Pro wireless PIR pet-friendly Key Features: The product is a wireless system device for the Midway Pro and Essex Pro This detector is designed to detect human body movements in buildings The detector eliminates the movement of small animals on the floor (up to approximately 25 kg and a maximum height of 40 cm at a distance of up to 7 meters from the detector) The detector has a pulse response and occupies one position in the system The JS-7910 lens is only used for the standard immunity level The detector is equipped with an animal lens JS-7910 with an angle of 90°/12 m Product Info
€141,88
-
Jablotron JA-159J, Pro Wireless Doorbell
JA-159J, Pro Wireless Doorbell Key Features: The product is a wireless system device for the Jablotron Midway Pro and Essex Pro Button activation allows you to use the wireless calling function, activate an emergency alarm or control devices The product occupies one position in the system
€59,00
-
Jablotron JA-151M-GR mini magnetic contact light gray
JA-151M-GR mini magnetic contact light gray The Jablotron JA-151M-GR wireless mini magnetic detector is designed to detect the opening of doors and windows. The JA-151M-GR has a unique, compact design suitable for all types of installations. The magnetic detector is powered by a CR2032 lithium battery. The detector can be assigned to a zone, and it occupies only one position in the alarm system. Product specifications: Mini Magnetic Contact Wireless, Light Gray Communication wirelessly via 868.1 MHz Including LED indication (with flash) Configurable via F-Link Classification: Class-2 'Powered by 1x CR2032 battery (excl.) Internal use (EN-50131-1) Dimensions: 55 x 16/26 x163mm
€90,75
-
Jablotron JA-150M-AN magnetic contact with 2 inputs, anthracite
JA-150M-AN magnetic contact with 2 inputs, anthracite The JA-150M-AN detector is designed to detect the opening of a window or door. It monitors two fundamental behavioral responses: status or pulse responses to the opening. It also includes two inputs, IN1 and IN2. In addition to the usual detection, this magnetic contact also offers the option of using two independent inputs. This makes it possible to connect, for example, a roller shutter detector or a water overflow detector. Technical specifications: Magnet wireless 2 inputs, anthracite Communication wirelessly via 868.1 MHz Including LED indication (with flash) Configurable via F-Link Classification: Class-2 Powered by 1x AA (LR6) 1.5V battery Internal use (EN-50131-1) Dimensions: 109 x 24 x 22mm.
€97,87
-
Jablotron JA-162PW | Wireless Designline | Dual MW PIR |
JA-162PW | Wireless Designline | Dual MW PIR | This product is a wireless device from the JABLOTRON 100+ system. This detector is designed to detect human body movements inside buildings. High immunity to false alarms is achieved thanks to the combination of PIR and microwave (MW) detection. The detector works like a traditional PIR detector, but if the PIR detects movement in a monitored area, the MW section is activated, confirming the previous PIR activation. Specifications: Power supply 2x lithium battery, type: CR123A (3 V/1500 mAh) Please note: Batteries are not included. Typical battery life 4 years LowBatt status < 2.7 V Quiescent current consumption 65 μA Maximum power consumption 50mA Communication band 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) 25 mW Communication range approx. 300 m (open terrain) Recommended installation height 2.2 – 2.5 m above floor level PIR detection angle/detection coverage 90°/12 meters Detection angle/detection coverage MW 80°/12 meters Operating frequency MW 24.125 GHz Maximum radio frequency power (ERP) 30mW Dimensions 63x150x40mm Weight (without batteries) 125 grams Classification Safety class 2/Environmental class II (according to EN 50131-1) Operating temperature range -10 °C to +40 °C Average operating humidity 75% RH, without condensation Certification body Trezor Test sro (nr. 3025) In accordance with ETSI EN 300 220-1,-2, ETSI EN 300 440, EN 50130-4, EN 55032, EN 62368-1, EN 50581, EN 50131-1, EN 50131-2-4, EN 50131-5-3, EN 50131-6 Operating conditions according to general authorization ERC-REC 70-03
€199,35
-
Jablotron JA-150A II Wireless Internal Siren
JA-150A II Wireless Internal Siren A wireless indoor siren, the JA-150A II, is designed to provide acoustic alarm signalling, entry and exit delays, and PG output activation in the security system. Product Info
€173,33
-
Jablotron JA-150M-GR magnetic contact with 2 inputs, light gray
JA-150M-GR magnetic contact with 2 inputs, light gray The JA-150M-GR detector is designed to detect the opening of a window or door. It monitors two fundamental behavioral responses: status or pulse responses to the opening. It also includes two inputs, IN1 and IN2. In addition to the usual detection, this magnetic contact also offers the option of using two independent inputs. This makes it possible to connect, for example, a roller shutter detector or a water overflow detector. Technical specifications: Magnet wireless 2 inputs, anthracite Communication wirelessly via 868.1 MHz Including LED indication (with flash) Configurable via F-Link Classification: Class-2 Powered by 1x AA (LR6) 1.5V battery Internal use (EN-50131-1) Dimensions: 109 x 24 x 22mm.
€97,87
-
Jablotron JA-151M-AN mini magnetic contact anthracite
JA-151M-AN mini magnetic contact light gray The Jablotron JA-151M-AN wireless mini magnetic detector is designed to detect the opening of doors and windows. The JA-151M-AN has a unique, compact design suitable for all types of installations. The magnetic detector is powered by a CR2032 lithium battery. The detector can be assigned to a zone, and it occupies only one position in the alarm system. Product specifications: Mini Magnetic Contact Wireless, Light Gray Communication wirelessly via 868.1 MHz Including LED indication (with flash) Configurable via F-Link Classification: Class-2 'Powered by 1x CR2032 battery (excl.) Internal use (EN-50131-1) Dimensions: 55 x 16/26 x163mm
€90,75
-
Jablotron JA-150MB Wireless Dark Brown Magnetic Contact
JA-150MB Wireless Dark Brown Magnetic Contact Key Features: Magnetic contact, color brown Indoor use at windows/doors Communication wirelessly over 868MHz 2x alarm input
€69,00
-
Jablotron JA-155P, PIR ceiling motion detector
JA-155P, PIR ceiling motion detector This detector is designed to detect human body movements in buildings The product is installed on the ceiling and its guaranteed detection range is 360° with a capture radius of up to 5.5 m at a mounting height of 3.5 m The resistance to false alarms can be set at two levels The detector has a pulse response and occupies one position in the system Please note! Only works on JA-103 and JA-107 control panels. Specifications: Power 2x lithium batteries, type CR123A (3 V/1500 mAh) Warning: batteries are not included. Number of batteries 1x CR123A 2x CR123A Lifetime (Smartwatch mode) 2 years 4 years Low battery voltage < 2.4 V Communication band 868.1 MHz, JABLOTRON protocol RF range up to 300 m (open area) Recommended installation height 2.5 – 3.5 m above the ground level Detection coverage 360°/11 m (installation height – 3.5 m) Dimensions Ø 125 x 40 mm Weight (without batteries) 124 g Classification security grade 2/II. Indoor general (according to EN 50131-1) Operational environment indoor general Operational temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification body Trezor Test sro (no. 3025) Complies with EN 50131-1 ed. 2+A1+A2, EN 50131-2-2, EN 50131-5-3+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581 Can be operated according to ERC REC 70-03
€173,33
-
Jablotron JA-150M-B magnetic contact with 2 inputs Wireless Brown
JA-150M-B magnetic contact with 2 inputs Wireless Brown The JA-150M-B detector is designed to detect the opening of a window or door. It monitors two fundamental behavioral responses: status or pulse responses to the opening. It also includes two inputs, IN1 and IN2. In addition to the usual detection, this magnetic contact also offers the option of using two independent inputs. This makes it possible to connect, for example, a roller shutter detector or a water overflow detector. Technical specifications: Magnet wireless 2 inputs, anthracite Communication wirelessly via 868.1 MHz Including LED indication (with flash) Configurable via F-Link Classification: Class-2 Powered by 1x AA (LR6) 1.5V battery Internal use (EN-50131-1) Dimensions: 109 x 24 x 22mm.
€97,87
-
Jablotron JA-162PC, Wireless motion detector with photo camera
JA-162PC, Wireless motion detector with photo camera This device is a wireless component of the JABLOTRON system. It detects human movement inside buildings and provides visual alarm confirmation. The camera takes color photos with a resolution of up to 640x480 pixels. The camera is equipped with a visible flash to take photos in the dark. The images are stored in the detector's internal memory and then transmitted to the control panel, which can then be sent to MyJABLOTRON or ARC. The detector can also take a photo on request. The detector occupies one position in the system and must be installed by a trained technician with a valid certificate issued by an authorized distributor. Photo verification can only be used after registering the system with MyJABLOTRON or with a subsequent ARC service. This device is compatible with control panels JA-103K, JA-107K, JA-102K and higher models. Specifications: Current 2x lithium battery type CR123A 3 V/1.5 Ah Typical battery life about 2 years (1 activation and 1 series of photos per day) Please note: batteries are not included LowBatt Voltage ≤2.8 V Quiescent current consumption 90 µA Maximum power consumption 700mA Communication frequency 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) 11 mW Communication range approx. 300 m (unrestricted area) Recommended installation height 2.5 m above the floor PIR detection angle/detection coverage 90°/12 meters Horizontal camera recording angle 90° Range of the flash maximum 3 meters Camera resolution LQ 320x240; HQ 640 x 480 pixels Photo format LQ/HQ 5–20 kB/5–64 kB Typical (LQ) photo transmission time to the control panel up to 20 s (10 s) Typical (HQ) photo transmission time to the control panel up to 130 s (60 s) Typical time for transferring photos to the server 15 seconds/GPRS; 2 seconds/LAN Dimensions, weight (without batteries) 150 x 65 x 44 mm, 130 grams Operating temperature range -10 °C to +40 °C Operational environment In general Average operating humidity 75% RH, without condensation Classification Safety class 2/Environmental class II (EN 50131-1) Certification body Trezor Test No. 3025 Matches with EN 50131-1, EN 50131-2-2, EN 50131-5-3, EN 50131-6, EN 55032, ETSI EN 300 220-1,-2, EN 62368-1, EN IEC 63000 Can be operated according to ERC/REC-70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)
€365,48
-
Jablotron JA-152SHM, Wireless Shock and Tilt Detector
JA-152SHM, Wireless Shock and Tilt Detector Please note: Only suitable for JA-103 and JA-107 control panels. Combined shock or tilt detector with magnetic contact. In shock detection mode, it responds to vibrations and shocks. In tilt detection mode, it responds to changes in its position. Specifications: Power supply 1x alkaline battery type AA (LR6, 1.5 V / 2.4 Ah) Battery life approx. 2 years Maximum power consumption 80mA Control panel compatibility JA-103K, JA-107K Communication frequency 868.1 MHz, JABLOTRON protocol Maximum Radio Frequency Output (ERP) 18.2 mW Communication range approx. 300 m Environment within general Operating temperature range -10 °C to +40 °C Detector dimensions 24x109x24mm Magnet dimensions 16x55x15mm Weight (without battery) 35 grams
€129,68
-
Jablotron JA-152P-GR, Wireless PIR motion detector, Grey
JA-152P-GR, Wireless PIR motion detector, Grey NOTE: Only works on the Midway Pro and Essex Pro and Mercury This product is a wireless system device for the JABLOTRON 100+. It is designed to detect human body movements inside buildings. The guaranteed detection coverage is 90°/12 m. The detector meets the highest quality and design standards, making it suitable even for luxurious interiors. Specifications: Compatible with F-Link 2.0.0 and later Current 1 Lithium battery type CR123A (3 V/1500 mAh) Please note: Battery not included Typical battery life 4 years (longest in smartwatch mode, at 20°C) Low battery voltage < 2.4 V Power consumption in standby mode 30 μA Maximum power consumption 100mA Communication band 868.1 MHz, JABLOTRON protocol Communication range approx. 300 m (open terrain) Recommended installation height 2.2 – 2.5 m above the floor Detection angle/detection coverage 90°/12 meters Dimensions 62x110x40mm Weight (without battery) 90 grams Classification Safety class 2/Environmental class II (according to EN 50131-1) Operational environment In general Operating temperature range -10 °C to +40 °C Average operating humidity 75% RH, non-condensing Certification body Trezor Test sro (nr. 3025) Matches with EN 50131-1 ed. 2+A1+A2, EN 50131-2-2, EN 50131-5-3+A1, EN 50131-6 ed. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581 Can be operated according to ERC-REC 70-30
€168,19
-
Jablotron JA-162PW-AN, Wireless Designline Dual MW PIR anthracite
JA-162PW-AN, Wireless Designline Dual MW PIR anthracite This product is a wireless device from the JABLOTRON 100+ system. This detector is designed to detect human body movements inside buildings. High immunity to false alarms is achieved thanks to the combination of PIR and microwave (MW) detection. The detector works like a traditional PIR detector, but if the PIR detects movement in a monitored area, the MW section is activated, confirming the previous PIR activation. Specifications: Power source 2 lithium batteries, type CR123A (3 V/1500 mAh); batteries are not included Typical battery life 4 years Low battery charge level < 2.7 V Quiescent current consumption 65 μA Maximum power consumption 50 mA Communication band 868.1 MHz, JABLOTRON protocol Maximum MW radio frequency power (Effective Radiated Power – ERP) 25 mW Communication range approx. 300 m (open space) Recommended installation height 2.2 – 2.5 m above floor level Detection angle/PIR coverage 90°/12 m Detection angle/MW coverage 80°/12 m MW frequency 24.125 GHz Maximum Effective Radiated Power (ERP) 30 mW Sizes 150 x 63 x 40 mm Weight (without batteries) 125 g Classification Safety grade 2/Environmental class II (according to EN 50131-1) Operating temperature range -10 °C to +40 °C Average operating humidity 75% relative humidity, no condensation Certification body Trezor Test sro (nr. 3025) In accordance with ETSI EN 300 440, EN 50130-4, EN 55032, EN 62368-1, EN 50581, EN 50131-1, EN 50131-2-4 Operating conditions according to general authorization ERC REC 70-03
€199,35
-
Jablotron JA-152P-AN, Wireless PIR motion detector, anthracite
JA-152P-AN, Wireless PIR motion detector, anthracite NOTE: Only works on the Midway Pro and Essex Pro and Mercury This product is a wireless system device for the JABLOTRON 100+. It is designed to detect human body movements inside buildings. The guaranteed detection coverage is 90°/12 m. The detector meets the highest quality and design standards, making it suitable even for luxurious interiors. Specifications: Compatible with F-Link 2.0.0 and later Current 1 Lithium battery type CR123A (3 V/1500 mAh) Please note: Battery not included Typical battery life 4 years (longest in smartwatch mode, at 20°C) Low battery voltage < 2.4 V Power consumption in standby mode 30 μA Maximum power consumption 100mA Communication band 868.1 MHz, JABLOTRON protocol Communication range approx. 300 m (open terrain) Recommended installation height 2.2 – 2.5 m above the floor Detection angle/detection coverage 90°/12 meters Dimensions 62x110x40mm Weight (without battery) 90 grams Classification Safety class 2/Environmental class II (according to EN 50131-1) Operational environment In general Operating temperature range -10 °C to +40 °C Average operating humidity 75% RH, non-condensing Certification body Trezor Test sro (nr. 3025) Matches with EN 50131-1 ed. 2+A1+A2, EN 50131-2-2, EN 50131-5-3+A1, EN 50131-6 ed. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581 Can be operated according to ERC-REC 70-30
€168,19
-
Jablotron JA-162PC-AN, Wireless motion detector with photo camera, anthracite
JA-162PC-AN, Wireless motion detector with photo camera, anthracite This device is a wireless component of the JABLOTRON system. It detects human movement inside buildings and provides visual alarm confirmation. The camera takes color photos with a resolution of up to 640x480 pixels. The camera is equipped with a visible flash to take photos in the dark. The images are stored in the detector's internal memory and then transmitted to the control panel, which can then be sent to MyJABLOTRON or ARC. The detector can also take a photo on request. The detector occupies one position in the system and must be installed by a trained technician with a valid certificate issued by an authorized distributor. Photo verification can only be used after registering the system with MyJABLOTRON or with a subsequent ARC service. This device is compatible with control panels JA-103K, JA-107K, JA-102K and higher models. Specifications: Current 2x lithium battery type CR123A 3 V/1.5 Ah Typical battery life about 2 years (1 activation and 1 series of photos per day) Please note: batteries are not included LowBatt Voltage ≤2.8 V Quiescent current consumption 90 µA Maximum power consumption 700mA Communication frequency 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) 11 mW Communication range approx. 300 m (unrestricted area) Recommended installation height 2.5 m above the floor PIR detection angle/detection coverage 90°/12 meters Horizontal camera recording angle 90° Range of the flash maximum 3 meters Camera resolution LQ 320x240; HQ 640 x 480 pixels Photo format LQ/HQ 5–20 kB/5–64 kB Typical (LQ) photo transmission time to the control panel up to 20 s (10 s) Typical (HQ) photo transmission time to the control panel up to 130 s (60 s) Typical time for transferring photos to the server 15 seconds/GPRS; 2 seconds/LAN Dimensions, weight (without batteries) 150 x 65 x 44 mm, 130 grams Operating temperature range -10 °C to +40 °C Operational environment In general Average operating humidity 75% RH, without condensation Classification Safety class 2/Environmental class II (EN 50131-1) Certification body Trezor Test No. 3025 Matches with EN 50131-1, EN 50131-2-2, EN 50131-5-3, EN 50131-6, EN 55032, ETSI EN 300 220-1,-2, EN 62368-1, EN IEC 63000 Can be operated according to ERC/REC-70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)
€365,48
-
Jablotron JA-169P Wireless outdoor detector (dual detection)
Jablotron JA-169P Wireless outdoor detector (dual detection) The detector is designed to detect human movement outdoors. The optical part of the detector contains two PIR sensors with AND logic. An alarm signal will only be triggered if both detection zones are crossed simultaneously. The detector features an anti-mask function—protection against tampering/tampering—and two built-in tampers (front and back). These immediately report any opening or attempted opening of the detector. The detector has a periodic self-test function and sends its status to the control panel. Power supply 1x lithium battery type CR123A (3.0 V / 1.4 Ah) Battery life approx. 3 years Maximum power consumption 55 mA communication frequency: 868.1 MHz, JABLOTRON protocol Maximum Radio Frequency Output (ERP) 25 mW Communication range: approx. 300 m Environment outside general Ingress Protection Code IP45 Operating temperature range: -25 °C to +60 °C Dimensions 189 x 81 x 98 mm Weight (without battery) 380 grams Detection features: 15 m / 85°, 11 segments
€389,00
-
Jablotron JA-152M, Wireless flush-mounted door detector for Pro Series
JA-152M, Wireless flush-mounted door detector for Pro Series This product is a wireless system device for the JABLOTRON 100+. It is used to detect when windows or doors are opened. This version is designed for concealed installation on window or door frames. Specifications: Current 2x lithium battery, type CR2032 (3.0 V/0.2 Ah) Please note: batteries are not included Typical battery life approx. 2 years Low battery voltage <2.4 V Current consumption 4 μA Maximum power consumption 40mA Communication band 868.1 MHz, JABLOTRON protocol RF range approx. 300 m (open terrain) Dimensions 191x24x7mm Weight (without batteries) 32 grams Classification Class 2/II. Indoor general (According to EN 50131-1) Operational environment extensive within general Operating temperature range -20 °C to +60 °C Average operating humidity 75% RH, non-condensing Certification body Trezor Test sro (nr. 3025) Also meets EN 50131-1 ed. 2+A1+A2, EN 50131-2-6, EN 50131-5-3+A1, EN 50131-6 ed. 2+A1, ETSI EN 300 220-1-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581 Can be operated according to ERC-REC 70-30
€125,87
-
Jablotron JA-162PC-GR, Wireless motion detector with photo camera Gray
JA-162PC-GR, Wireless motion detector with photo camera Gray This device is a wireless component of the JABLOTRON system. It detects human movement inside buildings and provides visual alarm confirmation. The camera takes color photos with a resolution of up to 640x480 pixels. The camera is equipped with a visible flash to take photos in the dark. The images are stored in the detector's internal memory and then transmitted to the control panel, which can then be sent to MyJABLOTRON or ARC. The detector can also take a photo on request. The detector occupies one position in the system and must be installed by a trained technician with a valid certificate issued by an authorized distributor. Photo verification can only be used after registering the system with MyJABLOTRON or with a subsequent ARC service. This device is compatible with control panels JA-103K, JA-107K, JA-102K and higher models. Specifications: Current 2x lithium battery type CR123A 3 V/1.5 Ah Typical battery life about 2 years (1 activation and 1 series of photos per day) Please note: batteries are not included LowBatt Voltage ≤2.8 V Quiescent current consumption 90 µA Maximum power consumption 700mA Communication frequency 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) 11 mW Communication range approx. 300 m (unrestricted area) Recommended installation height 2.5 m above the floor PIR detection angle/detection coverage 90°/12 meters Horizontal camera recording angle 90° Range of the flash maximum 3 meters Camera resolution LQ 320x240; HQ 640 x 480 pixels Photo format LQ/HQ 5–20 kB/5–64 kB Typical (LQ) photo transmission time to the control panel up to 20 s (10 s) Typical (HQ) photo transmission time to the control panel up to 130 s (60 s) Typical time for transferring photos to the server 15 seconds/GPRS; 2 seconds/LAN Dimensions, weight (without batteries) 150 x 65 x 44 mm, 130 grams Operating temperature range -10 °C to +40 °C Operational environment In general Average operating humidity 75% RH, without condensation Classification Safety class 2/Environmental class II (EN 50131-1) Certification body Trezor Test No. 3025 Matches with EN 50131-1, EN 50131-2-2, EN 50131-5-3, EN 50131-6, EN 55032, ETSI EN 300 220-1,-2, EN 62368-1, EN IEC 63000 Can be operated according to ERC/REC-70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)
€365,48
You have seen 48 out of 49 products