Jablotron JA-113A-BASE-RB BUS external siren base

Description

General

  • Type: JA‑113A‑BASE-RB (bus external siren basic module) 

  • Function: Basic unit for communication with the control panel and a number of internal functionalities such as tamper detection, can be combined with optional covers for acoustic and optical alarm display 

Technical specifications

  • Connection: 12 V DC via BUS system (range 8–15 V) with average current consumption approx. 2.5 mA (stand-by) up to max. 450 mA

  • Backup battery (optional, not included as standard): NiMH 4.8 V / 1,800 mAh (BAT‑4V8‑LH1800) with typical service life approx. 5 years. Low voltage detection < 4.6 V is supported

  • Siren output: piezo element with ~100 dB at 1 m (hanging new battery) 

Dimensions & weight

  • Dimensions: 200 × 300 × 72 mm (with JA-1X1A-C cover) or 200 × 300 × 62 mm (with JA-1X2A-C cover) 

  • Weight: ± 413 g without battery 

Environmental and certification

  • Use: for outdoor installation, ambient temperature from −25 °C to +60 °C and humidity up to ~75 % RH without condensation

  • Security class: Grade 2 / environmental class IV according to EN 50131‑1, EN 50131‑4 certification.

Installation

  • Assembly: use two screws through mounting holes, built-in spirit level for accurate alignment 

  • Bus connection: always install with the power off, guide the cable through the appropriate opening and secure it with clips 

  • Tamper surveillance: sensor detects opening of the front cover — automatic calibration after installation, closure must be complete to avoid error messages 

Compatibility

  • System compatibility: works with JABLOTRON 100 and 100+ control panels such as JA-102K, JA-103K and JA-107K 

  • Required cover: becomes the basic unit supplied without cover; these must be purchased separately. Available COVERS:

    • JA‑1X2A‑C‑WH (white plastic, transparent flash)

    • JA‑1X2A‑C‑GR (gray plastic)

    • JA‑1X2A‑C‑AN (anthracite plastic)

    • JA‑1X1A‑C‑ST (red LED on stainless steel)

    • JA‑1X1A‑C‑ST‑B (blue LED on stainless steel)


Jablotron JA-113A-BASE-RB BUS external siren base

Product form
En stock — envío rápido desde nuestro almacén
🚚
Entrega estimada: calculando...
Plazo de entrega previsto: 1 a 3 días laborables.
📍
Recogida en Rojales
Disponible en 1 día laborable con cita previa.
Haz tu pedido hoy y lo prepararemos lo antes posible.

€127,05 Incl. VAT

    • Free shipping from €99
    • Free returns within 30 days

    Description

    General

    • Type: JA‑113A‑BASE-RB (bus external siren basic module) 

    • Function: Basic unit for communication with the control panel and a number of internal functionalities such as tamper detection, can be combined with optional covers for acoustic and optical alarm display 

    Technical specifications

    • Connection: 12 V DC via BUS system (range 8–15 V) with average current consumption approx. 2.5 mA (stand-by) up to max. 450 mA

    • Backup battery (optional, not included as standard): NiMH 4.8 V / 1,800 mAh (BAT‑4V8‑LH1800) with typical service life approx. 5 years. Low voltage detection < 4.6 V is supported

    • Siren output: piezo element with ~100 dB at 1 m (hanging new battery) 

    Dimensions & weight

    • Dimensions: 200 × 300 × 72 mm (with JA-1X1A-C cover) or 200 × 300 × 62 mm (with JA-1X2A-C cover) 

    • Weight: ± 413 g without battery 

    Environmental and certification

    • Use: for outdoor installation, ambient temperature from −25 °C to +60 °C and humidity up to ~75 % RH without condensation

    • Security class: Grade 2 / environmental class IV according to EN 50131‑1, EN 50131‑4 certification.

    Installation

    • Assembly: use two screws through mounting holes, built-in spirit level for accurate alignment 

    • Bus connection: always install with the power off, guide the cable through the appropriate opening and secure it with clips 

    • Tamper surveillance: sensor detects opening of the front cover — automatic calibration after installation, closure must be complete to avoid error messages 

    Compatibility

    • System compatibility: works with JABLOTRON 100 and 100+ control panels such as JA-102K, JA-103K and JA-107K 

    • Required cover: becomes the basic unit supplied without cover; these must be purchased separately. Available COVERS:

      • JA‑1X2A‑C‑WH (white plastic, transparent flash)

      • JA‑1X2A‑C‑GR (gray plastic)

      • JA‑1X2A‑C‑AN (anthracite plastic)

      • JA‑1X1A‑C‑ST (red LED on stainless steel)

      • JA‑1X1A‑C‑ST‑B (blue LED on stainless steel)


    Recently viewed products

      Delivery time and returns

      When will my order be delivered?

      We ship worldwide. Your order will be packaged very carefully and delivered wherever you want. Delivery takes between 2-4 working days. After ordering, you will receive an email with more information about delivery.

      Can I return my product?

      Orders may be returned or exchanged within 30 days of receipt of package as long as they are in original resalable condition.

      Send us a message!

      Do you have a question about this product?

      © 2026 Alarma-Total.es, Powered by Shopify

      • American Express
      • Apple Pay
      • Bancontact
      • Google Pay
      • iDEAL Wero
      • Klarna
      • Maestro
      • Mastercard
      • PayPal
      • Shop Pay
      • Union Pay
      • USDC
      • Visa

      Login

      Forgot your password?

      Don't have an account yet?
      Create a free account and enjoy many benefits.