The Hikvision DS-K1T323MBWX-E1 is a compact and robust access control terminal that combines facial recognition with card authentication. It is designed for indoor and outdoor use (IP65) and suitable for situations where speed and reliability are important, such as business offices, warehouses, schools or healthcare institutions. Applications Flexible authentication: By supporting both facial recognition and card acceptance, the system provides additional convenience and redundancy. Fast and accurate: With recognition times under 0.2 s and high accuracy, it is suitable for busy entrances. Weatherproof use: Thanks to the IP65 rating, it can be used indoors or sheltered outdoors. Easy to integrate: With standard network interfaces, Wiegand and PoE power, connection to existing access control systems is relatively easy. Maintenance-friendly: Updates, configuration and monitoring via web or mobile interfaces facilitate remote management. 2.4-inch TFT display (resolution 240 × 320) 2 megapixel wide-angle lens Capacity for 1,000 faces and 3,000 cards Mixed authentication: facial recognition and card (M1) Facial recognition time less than ~0.2 to 0.33 seconds per user Face recognition distance: 0.3 to 1.5 meters Face recognition accuracy rate: > 99% Network connectivity: 10/100 Mbps, Wi-Fi and Bluetooth supported Interfaces & connections: PoE (IEEE 802.3at) and 12 V DC power supply possible Wiegand interface (one side) Door closing control, exit button, and door opening contact inputs Tamper input (TAMPER) Storage capacity: up to 150,000 events Environmental characteristics: Working temperature: –30 °C to +65 °C Working humidity: 0–90% (without condensation) Protection class: IP65 (against dust and water) Dimensions and weight: Dimensions: 135 × 52 × 26 mm Net weight: ~0.19 kg Multi-language support: English, Spanish, Arabic, Russian, Vietnamese, Portuguese (Brazil), Turkish, French, Traditional Chinese, Indonesian, etc. Functionalities: Support for facial anti-spoofing (fraud detection) Two-way audio possible (via client software, indoor unit or main station) Support AP mode, mobile/web configuration WDR (Wide Dynamic Range) support for image enhancement in high contrast environments
€349,00 €299,00
Hikvision DS-K1T344MBFWX-E1 Face Recognition stand alone unit (also fingerprint) With the DS-K1T344MBFWX-E1 Face Recognition Terminal from Hikvision, there is now an affordable access control solution with built-in tag fingerprint reader and facial recognition. The device has its own database in which 3000 facial patterns, fingerprints and tags can be stored. Main features: Supports a 4.5-inch LCD touchscreen, a 2 megapixel wide-angle lens and a built-in M1 card reading module. Capacity for max. 3000 faces, max. 3000 fingerprints and max. 3000 cards. Face recognition distance: 0.3m to 1.5m; Duration Supports face, card, PIN and fingerprint authentication. Two-way audio with client software, residential unit and main unit. Supports mobile web and PC web for configuration. Supports WiFi Supports power supply via 12 VDC or PoE and supports power supply for device and door lock. The facial recognition terminal uses a deep learning algorithm, which helps to recognize faces faster and more accurately. It also supports multiple authentication modes. It can be applied in different scenarios, such as in buildings, enterprises, the financial sector and other important sectors. The device works with a 2MP camera and special technology that ensures that photos of authorized persons are not responded to. It is possible to enter people via a photo. There are connections for USB, control of an electric lock, a door contact, a tamper alarm, a button to open the door from the inside and an RS-485 connection. The power supply is 12V DC or PoE.
€419,00
Complete Pro door controller, 1 door, DS-K2601Hikvision access control combines all disciplines into one VMS, one software package!In addition to video and intercom, this addition also allows access control. The wide choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very complete solution.You can configure groups of users and login details, access cards and codes. Hikvision access control supports cards, codes, QR codes, fingerprints and from mid-2018 also faces and license plates.The DS-K2600 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of the system. The controller also supports offline operation and is designedwith tamper switch. Door controllers from the DS-K2600 series support smart functions such as anti-passback and first pass. For example, anti-passback prevents a card from being used by two people because the card must first be used to leave the zone before the zone can be re-entered. Anti-passback can be set over the system, even when it has to be applied over a combination of door controllers, even when the software is not running and the door controller is not connected to the network.Presence functions ensure that you can see how long employees have been in the building. When you add the hourly rate, the system will immediately let you know what the costs are.Overtime and absence can also be easily filtered.You can load a map to easily see where the controller is located and click on the corresponding camera. Link the cameras to events so that there are video pop-ups with live images and captured images. You can look back at this immediately. Specifications:Linkable card readers: 2 Wiegand readers & 2 RS485 readersInput interface: 4 alarm inputs, By Magnetic×1, By Switch×1, Case Input×2, Tamper-proof×1; Output interface: By Switch Relay×1Alarm Relay×1Uplink Communication Interface: TCP/IP Network Interface and RS-485 InterfaceMemory100,000 cards and 300,000 eventsDoor controller information:• 32-bit high-speed processor• TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure data security.• The recognition and storage of card number with up to 20 digitsMassive storage with 100,000 (can be issued to 200,000) cards information and 300,000 (can be issued to 600,000) access control events.• Supports multi-door interlocking function (DS-K2602, and DS-K2604), anti-passback function, multi-card function, first card function, super card and super password function.• Online upgrade function and online remote control of the doors.• Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, duress card and code alarm, blacklist alarm and invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.• Supports zone alarm input• Supports RS485 interface and Wiegand interface for card reader access. Wiegand interface supports W26/W34 and is seamlessly compatible with third-partyparty card reader with Wiegand interface.• Supports various card types such as normal/blocked/blacklist/patrol/guest/force/super card, etc.;• Various indicators to show different device status• Supports time synchronization via NTP, manual or automatic method• Watchdog to perform device status detection.• Data can be stored permanently when the controller is turned off
€395,00
Basic+ door controller, 4 doors, DS-K2804Hikvision access control combines all disciplines into one VMS, one software package!In addition to video and intercom, this addition also allows access control. The wide choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very complete solution.You can configure groups of users and login details, access cards and codes. Hikvision access control from the Basic+ series supports cards and codesThe DS-K2800 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of the system. The controller also supports offline operation and is designedwith tamper switch. Presence functions ensure that you can see how long employees have been in the building. When you add the hourly rate, the system will immediately let you know what the costs are.Overtime and absence can also be easily filtered.You can load a map to easily see where the controller is located and click on the corresponding camera. Link the cameras to events so that there are video pop-ups with live images and captured images. You can look back at this immediately. Specifications:Linkable card readers: Wiegand readers Input interface: 4 alarm inputs, By Magnetic×4By Switch×4Case Input×4Tamper-proof×1; Output interface: By Switch Relay×4Alarm Relay×4Uplink Communication Interface: TCP/IP Network Interface and RS-485 InterfaceMemory10,000 cards and 300,000 eventsDoor controller information:• 32-bit high-speed processor• TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure data security.• The recognition and storage of card number with up to 20 digits• Storage of 50,000 events• Supports first card function, super card and super password function.• Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, duress card and code alarm, blacklist alarm and invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.• Supports zone alarm input• Supports Wiegand interface to access the card reader. Wiegand interface supports W26/W34 and is seamlessly compatible with third-partyparty card reader with Wiegand interface.• Supports various card types such as normal/blocked/blacklist/patrol/guest/force/super card, etc.;• Various indicators to show different device status• Supports time synchronization via NTP, manual or automatic method• Watchdog to perform device status detection.• Data can be stored permanently when the controller is turned off
€346,00
DS-K1108E card reader, EMThe DS-K1108E is a card reader from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read EM cards and be connected to Hikvision's Basic+ and Pro Complete door controllers.EM vs MiFareHikvision supplies card readers with the option to read EM or MiFare. This choice is in the reader and cannot be adjusted via software. MiFare has stronger encryption. If other EM solutions are already available, EM can also be chosen.RS-485 vs WiegandHikvision card readers such as the DS-K1104M are equipped with connection options for both Wiegand and RS-485.Wiegand has the potential disadvantage that more cores (7) are needed to achieve the correct connection. After this, however, no programming is required in the reader and everything can be set via the software.RS-485 has the advantage that fewer cores are required (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. RS-485 can also be used in a bus form instead of a star topology. With RS-485, however, it is necessary for this reason to give the readers the corresponding address via dip switch. The order affects the setting options and therefore requires attention when making the setting. Readers that are considered entering are numbered odd, readers that are used when exiting the secured area are numbered even. Specifications:Wiegand connection - RS-485 connection.- 32-bit high-speed processor- Reading distance 3-5cm- Built-in audio indicator- LED status indicator- RS485 and Wiegand(W26/W34) protocol;- Tamper alarm;- Online upgrade function (if connected via 485)- EM recognition and card reading
€79,86
DS-K1108EK card reader with code keys, EMThe DS-K1108EK is a card reader with code keys from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read MiFare cards and be connected to Hikvision's Basic+ and Pro Complete door controllers.EM vs MiFareHikvision supplies card readers with the option to read EM or MiFare. This choice is in the reader and cannot be adjusted via software. MiFare has stronger encryption. If other EM solutions are already available, EM can also be chosen.RS-485 vs WiegandHikvision card readers such as the DS-K1108EK are equipped with connection options for both Wiegand and RS-485.Wiegand has the potential disadvantage that more cores (7) are needed to achieve the correct connection. After this, however, no programming is required in the reader and everything can be set via the software.RS-485 has the advantage that fewer cores are required (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. RS-485 can also be used in a bus form instead of a star topology. With RS-485, however, it is necessary for this reason to give the readers the corresponding address via dip switch. The order affects the setting options and therefore requires attention when making the setting. Readers that are considered entering are numbered odd, readers that are used when exiting the secured area are numbered even. Wiegand connection - RS-485 connection.Specifications:- 32-bit high-speed processor- Reading distance 3-5cm- Built-in audio indicator- LED status indicator- RS485 and Wiegand(W26/W34) protocol;- Tamper alarm;- Online upgrade function (if connected via 485)- EM recognition and card reading
€109,00
Desktop card reader for learning, DS-K1F100-D8EWith the DS-K1F100-D8E you can easily read cards with MiFare and EM frequencies, among others.The module is plug & play, no drivers need to be installed.Specifications:The module supports Mifare Card, CPU, PSAM, ID Card, EM. - Card frequency: | 13.56MHz and 125KHz- Card type: | Standard IC, CPU and ID (EM) Card, MiFare- PSAM Card Cassettes: | 2 PSAM Cassettes- Protocol: | ISO 14443 Type A/B Standard and ISO 7816 Standard
€99,00
EM Card, DS-KEM125EM Card suitable for access solutions with EM readers.Specifications:Sensing Frequency: | 125KHz +/- 6KHzData Format: | EM-4100Memory Capacity: | 64 bitFunction: | ReadSensing Distance: | 15cmWorking Temperature: | -20 ? -- + 75 ?Dimensions (L×W×H): | 85.5mm × 54mm × 0.8mmWeight: |
€4,90
Complete Pro door controller, 2 doors, DS-K2602Hikvision access control combines all disciplines into one VMS, one software package!In addition to video and intercom, this addition also allows access control. The wide choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very complete solution.You can configure groups of users and login details, access cards and codes. Hikvision access control supports cards, codes, QR codes, fingerprints and from mid-2018 also faces and license plates.The DS-K2600 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of the system. The controller also supports offline operation and is designedwith tamper switch. Door controllers from the DS-K2600 series support smart functions such as anti-passback and first pass. For example, anti-passback prevents a card from being used by two people because the card must first be used to leave the zone before the zone can be re-entered. Anti-passback can be set over the system, even when it has to be applied over a combination of door controllers, even when the software is not running and the door controller is not connected to the network.Presence functions ensure that you can see how long employees have been in the building. When you add the hourly rate, the system will immediately let you know what the costs are.Overtime and absence can also be easily filtered.You can load a map to easily see where the controller is located and click on the corresponding camera. Link the cameras to events so that there are video pop-ups with live images and captured images. You can look back at this immediately. Specifications:Door controller information:• 32-bit high-speed processor• TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure data security.• The recognition and storage of card number with up to 20 digitsMassive storage with 100,000 (can be issued to 200,000) cards information and 300,000 (can be issued to 600,000) access control events.• Supports multi-door interlocking function (DS-K2602, and DS-K2604), anti-passback function, multi-card function, first card function, super card and super password function.• Online upgrade function and online remote control of the doors.• Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, duress card and code alarm, blacklist alarm and invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.• Supports zone alarm input• Supports RS485 interface and Wiegand interface for card reader access. Wiegand interface supports W26/W34 and is seamlessly compatible with third-partyparty card reader with Wiegand interface.• Supports various card types such as normal/blocked/blacklist/patrol/guest/force/super card, etc.;• Various indicators to show different device status• Supports time synchronization via NTP, manual or automatic method• Watchdog to perform device status detection.• Data can be stored permanently when the controller is turned offLinkable card readers: 2 Wiegand readers & 2 RS485 readersInput interface: 4 alarm inputs, By Magnetic×1, By Switch×1, Case Input×2, Tamper-proof×1; Output interface: By Switch Relay×1Alarm Relay×1Uplink Communication Interface: TCP/IP Network Interface and RS-485 InterfaceMemory100,000 cards and 300,000 events
€449,00
DS-K1108MK card reader with code keys, MiFareThe DS-K1108MK is a card reader with code keys from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read MiFare cards and be connected to Hikvision's Basic+ and Pro Complete door controllers.EM vs MiFareHikvision supplies card readers with the option to read EM or MiFare. This choice is in the reader and cannot be adjusted via software. MiFare has stronger encryption. If other EM solutions are already available, EM can also be chosen.RS-485 vs WiegandHikvision card readers such as the DS-K1108EK are equipped with connection options for both Wiegand and RS-485.Wiegand has the potential disadvantage that more cores (7) are needed to achieve the correct connection. After this, however, no programming is required in the reader and everything can be set via the software.RS-485 has the advantage that fewer cores are required (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. RS-485 can also be used in a bus form instead of a star topology. With RS-485, however, it is necessary for this reason to give the readers the corresponding address via dip switch. The order affects the setting options and therefore requires attention when making the setting. Readers that are considered entering are numbered odd, readers that are used when exiting the secured area are numbered even. Specifications:Wiegand connection - RS-485 connection.- 32-bit high-speed processor- Reading distance 3-5cm- Built-in audio indicator- LED status indicator- RS485 and Wiegand(W26/W34) protocol;- Tamper alarm;- Online upgrade function (if connected via 485)- MiFare recognition and card reading
€109,00
MF-Y3 Yellow Mifare tag suitable for access solutions with MiFare readers. Specifications: Compact and durable, fits easily on key rings Reading and writing distance: 5 - 10 cm Operating frequency of 13.56 MHz Dimension: 41 × 32 × 3.5 mm IP67
€2,90
Mifare card, S50+TK4100Mifare card suitable for access solutions with MiFare readers.Specifications:Card type: thinFrequency: 125KHZ + 13.56MHZFunction: ReadingReading Distance: 15cmWorking temperature: -20°C - 75°CDimensions: 85.5x54x0.8mmWeight: 5.6g
€2,42
MF-Y3 Red Mifare tag suitable for access solutions with MiFare readers. Specifications: Compact and durable, fits easily on key rings Reading and writing distance: 5 - 10 cm Operating frequency of 13.56 MHz Dimension: 41 × 32 × 3.5 mm IP67
€2,90
MF-Y3 Blue Mifare tag suitable for access solutions with MiFare readers. Specifications: Compact and durable, fits easily on key rings Reading and writing distance: 5 - 10 cm Operating frequency of 13.56 MHz Dimension: 41 × 32 × 3.5 mm IP67
€2,90
MF-Y3 White Mifare tag suitable for access solutions with MiFare readers. Specifications: Compact and durable, fits easily on key rings Reading and writing distance: 5 - 10 cm Operating frequency of 13.56 MHz Dimension: 41 × 32 × 3.5 mm IP67
€2,90
Basic+ door controller, 2 doors, DS-K2802Hikvision access control combines all disciplines into one VMS, one software package!In addition to video and intercom, this addition also allows access control. The wide choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very complete solution.You can configure groups of users and login details, access cards and codes. Hikvision access control from the Basic+ series supports cards and codesThe DS-K2800 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of the system. The controller also supports offline operation and is designedwith tamper switch. Presence functions ensure that you can see how long employees have been in the building. When you add the hourly rate, the system will immediately let you know what the costs are.Overtime and absence can also be easily filtered.You can load a map to easily see where the controller is located and click on the corresponding camera. Link the cameras to events so that there are video pop-ups with live images and captured images. You can look back at this immediately. Specifications:Linkable card readers: Wiegand readers Input interface: 4 alarm inputs, By Magnetic×2By Switch×2Case Input×2, Tamper-proof×1; Output interface: By Switch Relay×2Alarm Relay×2Uplink Communication Interface: TCP/IP Network Interface and RS-485 InterfaceMemory10,000 cards and 300,000 eventsDoor controller information:• 32-bit high-speed processor• TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure data security.• The recognition and storage of card number with up to 20 digits• Storage of 50,000 events• Supports first card function, super card and super password function.• Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, duress card and code alarm, blacklist alarm and invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.• Supports zone alarm input• Supports Wiegand interface to access the card reader. Wiegand interface supports W26/W34 and is seamlessly compatible with third-partyparty card reader with Wiegand interface.• Supports various card types such as normal/blocked/blacklist/patrol/guest/force/super card, etc.;• Various indicators to show different device status• Supports time synchronization via NTP, manual or automatic method• Watchdog to perform device status detection.• Data can be stored permanently when the controller is turned off
€318,23
DS-K1107AE | Access ControlImportant features Equipped with the 32-bit high-speed processor RS-485 and Wiegand (W26/W34) protocol and OSDP protocol Built-in EM card reading module (Frequency: 125KHz) Supports tamper alarm Built-in buzzer for identifying reading status Online upgrade function Watchdog design to repair itself in case an exception occurs, to ensure the long life of the reader
€49,00
DS-K1104MK, Vandal-proof card reader with code keys, MiFareThe DS-K1104M is a vandal-resistant card reader from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read MiFare cards and be connected to Hikvision's Basic+ and Pro Complete door controllers.RS-485 vs WiegandHikvision card readers such as the DS-K1104M are equipped with connection options for both Wiegand and RS-485.Wiegand has the potential disadvantage that more cores (7) are needed to achieve the correct connection. After this, however, no programming is required in the reader and everything can be set via the software.RS-485 has the advantage that fewer cores are required (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. RS-485 can also be used in a bus form instead of a star topology. With RS-485, however, it is necessary for this reason to give the readers the corresponding address via dip switch. The order affects the setting options and therefore requires attention when making the setting. Readers that are considered entering are numbered odd, readers that are used when exiting the secured area are numbered even. Specifications:Wiegand connection - RS-485 connection.- 32-bit high-speed processor- Reading distance 3-5cm- Built-in audio indicator- LED status indicator- RS485 and Wiegand(W26/W34) protocol;- Tamper alarm;- Online upgrade function (if connected via 485- Dust and waterproof- Mifare recognition and card reading
€189,00
DS-K1201MF, Fingerprint Card Reader MiFarePlease note: you must use the recording module to read fingerprints and cards DS-K1F820-FThe DS-K1201MF is a fingerprint card reader from Hikvision's access control line. The reader is designed with a 32 bit high-speed processor and includes an optical fingerprint recognition module. It communicates with the access control via the RS-485 protocol. The reader has been tested in accordance with IP65, which means the reader can be used outdoors.The reader can read MiFare cards and be connected to Hikvision's Basic+ and Pro Complete door controllers.
€199,00
Basic+ door controller, 1 door, DS-K2801Hikvision access control combines all disciplines into one VMS, one software package!In addition to video and intercom, this addition also allows access control. The wide choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very complete solution.You can configure groups of users and login details, access cards and codes. Hikvision access control from the Basic+ series supports cards and codesThe DS-K2800 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of the system. The controller also supports offline operation and is designedwith tamper switch. Presence functions ensure that you can see how long employees have been in the building. When you add the hourly rate, the system will immediately let you know what the costs are. Overtime and absence can also be easily filtered.You can load a map to easily see where the controller is located and click on the corresponding camera. Link the cameras to events so that there are video pop-ups with live images and captured images. You can look back at this immediately. Specifications:Linkable card readers: Wiegand readers Input interface: 4 alarm inputs, By Magnetic×1, By Switch×1, Case Input×2, Tamper-proof×1; Output interface: By Switch Relay×1Alarm Relay×1Uplink Communication Interface: TCP/IP Network Interface and RS-485 InterfaceMemory10,000 cards and 300,000 eventsDoor controller information:• 32-bit high-speed processor• TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure data security.• The recognition and storage of card number with up to 20 digits• Storage of 50,000 events• Supports first card function, super card and super password function.• Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, duress card and code alarm, blacklist alarm and invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.• Supports zone alarm input• Supports Wiegand interface to access the card reader. Wiegand interface supports W26/W34 and is seamlessly compatible with third-partyparty card reader with Wiegand interface.• Supports various card types such as normal/blocked/blacklist/patrol/guest/force/super card, etc.;• Various indicators to show different device status• Supports time synchronization via NTP, manual or automatic method• Watchdog to perform device status detection.• Data can be stored permanently when the controller is turned off
€260,15
Pro complete door controller, 4 doors, DS-K2604Hikvision access control combines all disciplines into one VMS, one software package!In addition to video and intercom, this addition also allows access control. The wide choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very complete solution.You can configure groups of users and login details, access cards and codes. Hikvision access control supports cards, codes, QR codes, fingerprints and from mid-2018 also faces and license plates.The DS-K2600 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of the system. The controller also supports offline operation and is designedwith tamper switch. Door controllers from the DS-K2600 series support smart functions such as anti-passback and first pass. For example, anti-passback prevents a card from being used by two people because the card must first be used to leave the zone before the zone can be re-entered. Anti-passback can be set over the system, even when it has to be applied over a combination of door controllers, even when the software is not running and the door controller is not connected to the network.Presence functions ensure that you can see how long employees have been in the building. When you add the hourly rate, the system will immediately let you know what the costs are.Overtime and absence can also be easily filtered.You can load a map to easily see where the controller is located and click on the corresponding camera. Link the cameras to events so that there are video pop-ups with live images and captured images. You can look back at this immediately. Specifications:Linkable card readers: 2 Wiegand readers & 2 RS485 readersInput interface: 4 alarm inputs, By Magnetic×1, By Switch×1, Case Input×2, Tamper-proof×1; Output interface: By Switch Relay×1Alarm Relay×1Uplink Communication Interface: TCP/IP Network Interface and RS-485 InterfaceMemory100,000 cards and 300,000 eventsDoor controller information:• 32-bit high-speed processor• TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure data security.• The recognition and storage of card number with up to 20 digitsMassive storage with 100,000 (can be issued to 200,000) cards information and 300,000 (can be issued to 600,000) access control events.• Supports multi-door interlocking function (DS-K2602, and DS-K2604), anti-passback function, multi-card function, first card function, super card and super password function.• Online upgrade function and online remote control of the doors.• Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, duress card and code alarm, blacklist alarm and invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.• Supports zone alarm input• Supports RS485 interface and Wiegand interface for card reader access. Wiegand interface supports W26/W34 and is seamlessly compatible with third-partyparty card reader with Wiegand interface.• Supports various card types such as normal/blocked/blacklist/patrol/guest/force/super card, etc.;• Various indicators to show different device status• Supports time synchronization via NTP, manual or automatic method• Watchdog to perform device status detection.• Data can be stored permanently when the controller is turned off
€559,00
DS-K1104M, Vandal-proof card reader, MiFareThe DS-K1104M is a vandal-resistant card reader from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read MiFare cards and be connected to Hikvision's Basic+ and Pro Complete door controllers.RS-485 vs WiegandHikvision card readers such as the DS-K1104M are equipped with connection options for both Wiegand and RS-485.Wiegand has the potential disadvantage that more cores (7) are needed to achieve the correct connection. After this, however, no programming is required in the reader and everything can be set via the software.RS-485 has the advantage that fewer cores are required (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. RS-485 can also be used in a bus form instead of a star topology. With RS-485, however, it is necessary for this reason to give the readers the corresponding address via dip switch. The order affects the setting options and therefore requires attention when making the setting. Readers that are considered entering are numbered odd, readers that are used when exiting the secured area are numbered even. Specifications:Wiegand connection - RS-485 connection.- 32-bit high-speed processor- Reading distance 3-5cm- Built-in audio indicator- LED status indicator- RS485 and Wiegand(W26/W34) protocol;- Tamper alarm;- Online upgrade function (if connected via 485- Dust and waterproof- Mifare recognition and card reading
€149,00
Fingerprint reading module, DS-K1F820-FThe DS-K1F820-F is a USB reading module for reading fingerprints into a Hikvision access control system. The optical module used was developed by Hikvision itself. This unit is not tied to one system and can therefore be used to read fingerprints in multiple systems.Specifications:System ParametersOperation System: | Windows XP, Windows 7, and Windows 10Fingerprint Module: | Optical, Red BacklightResolution: | 508 dpiFingerprint Template Size: | 256 × 288 (pixels)Device InterfacesUSB Interface: | USB2.0GeneralWorking Voltage: | 5VDC, 200mADimensions (L×W×H): | 100mm × 48mm × 35mm CPU: | 32bit MCUWorking Temperature: | -30°C to +70°C Working Humidity: | 20% to 80% (Non-Condensing)
€189,00
Sewosy PBNONC Contacts NO and NC. Terminals with screw connection. Cut-off power: 36V DC max/3A, Operating mode: Impulse. Operating temperature: -5 C to +55 C. IP20. Dimensions built-in: 86x86x14mm, surface-mounted 86x86x46mm. Supplied with surface-mounted box.
€49,00
You have 24 of the 28 products seen
Hikvision access control combines all disciplines into one VMS, one software package!
In addition to video and intercom, this addition also allows access control. The wide choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very complete solution.
You can configure groups of users and login details, access cards and codes. Hikvision access control from the Basic+ series supports cards and codes
