Dahua Video intercom
-
RJ45 Connector CAT6 UTP Pass Through Solid 10 pieces (rigid cores)
RJ45 Connector CAT6 UTP Pass Through Solid 10 pieces For connecting IP cameras or other network equipment RJ45 CAT6 UTP Connector| Pass Through | Solid, for stiff conductors, ideal and quick to crimp with the Pass Through crimping pliers. (see below for related products) Suitable for the novice do-it-yourselfer! 10 pieces in pack.
€4,99 €2,99
-
Dahua SCP3024B-CBZ, Indoor unit with Android 14, 7" IPS touchscreen and camera module, Built-in
The Android internal units from Dahua are alone suitable for wall mounting with the supplied square flush-mounted box. Due to the thickening at the back of the screen, it is not possible to install these indoor units as a surface-mounted unit.This indoor unit cannot be installed on a traditional round flush-mounted box. The Dahua DHI-SCP3024B-CBZ is an advanced 7-inch hybrid indoor unit designed for modern video intercom and smart home applications. Thanks to the Android 14 operating system, extensive wireless connectivity and flexible integration options, this panel offers a powerful and future-oriented solution for both residential and commercial installations. The full-screen design with ultra-thin black border provides a sleek and modern appearance, while the 7-inch IPS touchscreen (1024 × 600) guarantees a clear display and intuitive operation. The combination of IP, Wi-Fi and 4-wire communication makes the system particularly suitable for both new construction and renovation projects. The SCP3024B-CBZ distinguishes itself by its smart sensors and expandable functionality. The panel has a built-in light sensor for automatic brightness adjustment and integrated temperature and humidity sensors for additional insight into the indoor climate. In addition, the system supports various wireless technologies such as Bluetooth, Zigbee and Sub-1G, making it easy to integrate with smart home devices and security systems. Mechanical buttons are also customizable, so that functions can be set completely according to your wishes. With support for video storage via microSD (up to 512 GB), two-way audio with noise cancellation and features such as elevator call, video messaging and “Do Not Disturb” mode, this indoor unit offers maximum control and ease of use. Main benefits: 7” IPS touchscreen with modern full-screen design Android 14 for smart and flexible applications Hybrid communication (IP, Wi-Fi and 4-wire) Built-in light, temperature and humidity sensors Support for Zigbee, Bluetooth and 868 MHz sensors Two-way audio with echo and noise cancellation Expandable with smart home and alarm systems Storage up to 512 GB via microSD The Dahua DHI-SCP3024B-CBZ is the ideal choice for installers and end users who are looking for a versatile, smart and high-quality indoor unit with extensive integration options. Specifications: System Processor: Embedded processor Operating system: Android 14 Controls: Mechanical (customizable/replaceable) Network protocols: IPv4, RTSP, UDP, DNS, FTP, RTP, TCP, SIP Display & Audio Screen type: 7” IPS capacitive touchscreen Resolution: 1024×600 Viewing angle: H: 75° / V: 47° / D: 83° Audio compression: G.711a, G.711u, PCM Audio input: 1 channel Audio output: Built-in speaker Audio: Two-way communication Audio enhancement: Echo cancellation and noise reduction Audio bit rate: 16 kHz, 16 bit Video Video compression: H.264 Resolutions: 1080P, 720P, D1, WVGA, CIF, QVGA Frame rate: PAL: 25 fps NTSC: 30 fps Bit rate: 224 kbps – 8192 kbps Functionalities Communication: Full digital + analog 4-wire (hybrid) Support: IP, Wi-Fi and 4-wire Video messages: Yes (with SD card) Elevator control: Yes DND (Do Not Disturb): Adjustable Information messages: Yes Number of internal stations: Villa: 1 main + 9 extensions Apartment: 1 main + 4 extensions Sensors: Light sensor (auto brightness) Temperature and humidity sensor Extension: Zigbee module Bluetooth module 868 MHz (Sub-1G) sensors Storage: MicroSD up to 512 GB Network & Wireless Ethernet: 1 × 10/100 Mbps WiFi: Yes Standard: IEEE 802.11 b/g/n Frequency: 2.4 GHz Bluetooth: Yes (BR/EDR/BLE) Zigbee: Yes (802.15.4) Sub-1G: 868 – 868.6 MHz Max. transmit power: Wi-Fi/Bluetooth: ≤ 20 dBm Zigbee: ≤ 10 dBm Sub-1G: 14 dBm Interfaces RS-485: 1 USB: 1 Alarm input: 8 channels Alarm output: 1 channel Power output: 12V / 200 mA Network port: 1 × RJ45 (10/100 Mbps) 4-wire connection: Yes Doorbell input: Yes (via alarm input) Nutrition Power supply: 12 VDC, 2 A PoE: Supported Consumption: Standby: ≤ 10 W In use: ≤ 14 W Physical properties Material: PC + ABS Color: Gray Mounting: Flush mount Dimensions: 210.2 × 103.1 × 32.2 mm Weight: ± 0.83 – 1.25 kg Environmental specifications Operating temperature: -10 °C to +55 °C Storage temperature: 0 °C to +40 °C Humidity: Usage: 10% – 95% (non-condensing) Storage: 30% – 75% Max. altitude: Use: Indoor Certification & accessories Certification: CE Included: Mounting bracket, cables (RS-485, alarm, power supply, 4-wire) Optional: Power adapter
€509,00 €449,00
-
Universal desk stand PRO, Suitable for Dahua Android 14 built-in indoor units
This desk stand is suitable for most Dahua indoor units. The stand is supplied with screws for mounting the indoor stations on the stand. This standard was designed and developed in collaboration with Alarma Total and is not an official Dahua product. General: Material PLA (Polyactic acid) Color RAL 9005 Black Dimensions LxWxH 137x90x115
€79,00
-
Dahua SCP3044A-BZ, Indoor unit with Android 14, 10" IPS touchscreen, built-in
The Dahua SCP3044A-BZ, Indoor unit with Android 14, 10" IPS touchscreen, flush-mounted is an advanced 10.1 inch smart control panel for video intercom systems, designed for modern homes, apartment complexes, offices and hotels. Thanks to the Android 14 operating system and extensive connectivity options, this control panel offers a smart and future-proof solution for access control and communication. The bright IPS touchscreen with a resolution of 1280 × 800 pixels ensures intuitive operation and excellent viewing angles. With support for IP, Wi-Fi and 2-wire IP systems, the panel can be used flexibly in both new and existing installations. In addition to video intercom functionality, the system has extensive smart features, such as integration of third-party apps, monitoring cameras and support for alarm systems. Thanks to the built-in sensors for temperature and humidity and the automatic brightness control, the panel offers extra comfort and insight into the living environment. Two-way audio with noise reduction and echo cancellation ensures clear communication, while features such as automatic approximate wake-up and multi-color status LEDs ensure a user-friendly experience. With support for microSD storage up to 512 GB, various connection options (such as RS-485, USB and alarm I/O) and power supply via PoE or 48V DC, this panel is both powerful and versatile. The Android internal units from Dahua are alone suitable for wall mounting with the supplied square flush-mounted box. Due to the thickening at the back of the screen, it is not possible to install these indoor units as a surface-mounted unit.Please note: this indoor unit cannot be installed on a traditional round flush-mounted box. Specifications: Operating system: Android 14 Processor: Embedded processor Network protocols: IPv4, RTSP, UDP, DNS, FTP, RTP, TCP, SIP Display & controls Screen type: Capacitive touchscreen Screen size: 10.1 inches Resolution: 1280 × 800 pixels Viewing angle: ±80° (H/V) Operation: Multi-touch Audio Audio-in: 1 channel Audio out: Built-in speaker Audio compression: G.711a, G.711u, PCM Audio bit rate: 16 kHz / 16-bit Function: Two-way audio Improvement: Echo cancellation & noise reduction Features Video intercom & monitoring Support for APK/third-party apps Automatic approximate wake-up Do Not Disturb (DND) function Elevator control (call elevator) Video storage (with SD card) Temperature & humidity sensor Light sensor (automatic brightness) Multi-color status LED Storage microSD card support: up to 512 GB Network & connectivity Ethernet: 1× RJ45 (10/100 Mbps) Wi-Fi: 802.11 a/b/g/n/ac/ax (2.4 & 5 GHz) Bluetooth: Yes (BR/EDR/BLE) Zigbee: 3.0 (for integrations) Sub-1G: 868MHz support Communication: IP, Wi-Fi, 2-wire IP Connections Alarm inputs: 8 Alarm outputs: 1 RS-485: 1 USB: 1 Network port: 1 Doorbell: via alarm input Power output: 12V / 200 mA Nutrition Power supply: 48V DC PoE: Yes (standard) Consumption: Standby: ≤ 10W Active: ≤ 13 W
€549,99
-
Dahua PFA7753 Sunshade white for DB41 WiFi doorbell
PFA7753 Sunshade white for DB41 WiFi doorbell The PFA7753 is intended for the DB41 WiFi video doorbell when it has to look up or down against the sun. With this vertical bracket with an angle of 15 degrees you can better visualize the visitor. Can be applied both up and down Specifications General information Type Mounting accessories Physical properties Color White Depth 130 (mm) Length / Height 54 (mm) Weight 22 (gr) Width 33 (mm) Material PVC
€7,99 €6,99
-
Dahua PFA7753-B Sun hood black for DB41 WiFi doorbell
PFA7753-B Sunshade black for DB41 WiFi doorbell The PFA7753-B is intended for the DB41 WiFi video doorbell when it has to look further up or down against the sun. With this vertical bracket with an angle of 15 degrees you can better visualize the visitor. Can be applied both up and down Specifications General information Type Mounting accessories Physical properties Color Black Depth 130 (mm) Length / Height 54 (mm) Weight 22 (gr) Width 33 (mm) Material PVC
€7,99 €6,99
-
Dahua DS1AG wireless bell/speaker for DB41 series WiFi doorbells
DS1AG wireless bell/speaker for DB41 series WiFi doorbells The DS1AG from Dahua is a wireless indoor bell that emits a sound as soon as the doorbell rings via a linked video doorbell. You can plug this model directly into a wall socket. You can easily set the volume and melody to your liking via the DMSS app. The chime can be connected to multiple video doorbells at the same time, so you can receive a notification in multiple places in the house. The speaker can be plugged directly into a wall socket and works via Wi-Fi. Wireless indoor bell for video doorbells from Dahua Built-in speaker Multiple ringtones available Volume and melodies adjustable via the DMSS app Works via Wi-Fi (IEEE 802.11b/g/n/ax, 2.4 GHz) Supports connection with multiple video doorbells at the same time Compact and lightweight design (only 0.1 kg) Easy installation on mains power (100–240 VAC)
€49,00 €39,00
-
Dahua DH-PFS3106-4ET-60, 4xPoE ports, 1x Uplink 1x SFP port Gigabit
The Dahua DH-PFS3106-4ET-60 is a rugged, unmanaged PoE switch specially designed for surveillance and industrial environments. Thanks to its compact, stable design and extensive functionalities, it is very suitable for outdoor installations or industrial installations where reliability under harsh conditions is required. Ideal as an access layer switch in CCTV / IP camera systems, for example in outdoor environments (road intersections, car parks, industrial estates). Extremely suitable for situations where the temperature range or welded conditions are strict. Thanks to the long-distance PoE mode, it can be used for cameras at a greater distance from the switch, without a separate power supply. Automatic “reboot” of frozen devices via PoE Watchdog reduces maintenance efforts. General Type: Layer 2 unmanaged PoE switch Application: surveillance systems, industrial and outdoor applications Robust metal housing – suitable for DIN rail, wall or desktop mounting Supports redundant power supply (dual power input) Network ports 4×10/100 Mbps PoE ports (RJ-45) 1 × 10/100/1000 Mbps uplink (RJ-45) 1 × 100/1000 Mbps SFP port (fiber optic) PoE specifications Supports IEEE 802.3af / 802.3at and Hi-PoE (up to 60W) Maximum total PoE power: 60W Hi-PoE port: 60 W (one dedicated port) Standard PoE ports: up to 30 W per port PoE Watchdog: automatic restart of unresponsive devices Extend mode: PoE distance to 250 meters (10 Mbps speed) Performance Switching capacity: 6.8Gbps Parcel transit: 3.57 Mpps Buffer memory: 1 Mbit MAC address table: 8 K Nutrition and consumption Supply voltage: 48–57 V DC Power consumption without load: approx. 2.5 W Maximum consumption (full PoE load): 60W Environmental specifications Operating temperature: –30 °C to +65 °C Storage temperature: –30 °C to +70 °C Relative humidity: 5% – 95% (non-condensing) Protection: Air discharge 15 kV Contact discharge 8 kV Overvoltage protection (common & differential mode) Physical properties Dimensions: approx. 150 × 100 × 30 mm Weight: approx. 0.44 kg Housing: sturdy metal, suitable for industrial mounting
€119,00
-
Dahua DH-PFS3110-8ET-96, 8 port PoE Switch, 1000mbs
The Dahua DH-PFS3110-8ET-96 is a robust, unmanaged Hardened PoE switch (layer 2), ideal for demanding environments such as outdoor installations, CCTV networks and industrial applications. It combines multiple PoE ports with gigabit uplink capabilities and smart features such as PoE watchdog and long-distance PoE. PoE support 4 × RJ-45 ports (10/100 Mbps) with PoE (IEEE 802.3af/at) Port 1 is a “Hi-PoE” port and can deliver up to 60 W Ports 2 through 4 deliver up to 30W per port, with a total PoE capacity of 60W Support for intelligent PoE (dynamic management, prioritization) PoE Watchdog (automatic restart of PoE devices in case of failure) Support for PoE over longer distances (up to approx. 250 m at lower data rates) in 'Extend' mode Network ports & uplinks 1 × RJ-45 uplink port (10/100/1000 Mbps) 1 × SFP (optical) uplink port (100/1000 Base-X) for fiber optic connection Switch capacity of 6.8 Gbps and packet forwarding speed of approximately 3.57 Mpps MAC table for approx. 8,000 addresses Environment & robustness Operating temperature: –30 °C to +65 °C Housing with lightning/overvoltage protection (common mode, differential mode), ESD protection included Dual power supply support (redundancy) Compact size (approx. 150 × 108 × 30 mm) and weight around 440 g
€209,00
-
Dahua VTO4202F-P1 Video Intercom Camera Main module with 1 bell push
The Dahua VTO4202F-P1 is a 2 megapixel Full HD camera module for the 2nd generation Dahua modular IP video doorbell system. The camera module is a main module with camera and 1 bell push and can be connected with a network cable and supplied with power (PoE). A VTO4202 can be configured entirely according to your own wishes and can be combined with all types of VTO4202 modules, up to a maximum of 8 modules in total. PossibilitiesThe camera has a very wide viewing angle of 168.6 degrees horizontally and has a 2 megapixel Full HD image sensor. The module is equipped with infrared LED light for good visibility in the dark. The VTO4202F-P1 has a microphone and speaker for a clear video call via an indoor monitor or anywhere in the world with the app on your smartphone. The module can be connected to an electric lock or, for example, an electric fence to remotely control a door or gate. The camera module only works with an intercom indoor monitor and can also be used with the smartphone app. The VTO4202F-P1 cannot therefore work stand alone without an intercom monitor and with only the app.
€278,00 €219,00
-
Dahua VTO4202FB-P1 Video Intercom Camera Main module Black with 1 bell push
The Dahua VTO4202FB-P1 is a 2 megapixel Full HD camera module for the 2nd generation Dahua modular IP video doorbell system. The camera module is a main module with camera and 1 bell push and can be connected with a network cable and supplied with power (PoE). A VTO4202 can be configured entirely according to your own wishes and can be combined with all types of VTO4202 modules, up to a maximum of 8 modules in total. PossibilitiesThe camera has a very wide viewing angle of 168.6 degrees horizontally and has a 2 megapixel Full HD image sensor. The module is equipped with infrared LED light for good visibility in the dark. The VTO4202FB-P1 has a microphone and speaker for a clear video call via an indoor monitor or anywhere in the world with the app on your smartphone. The module can be connected to an electric lock or, for example, an electric fence to remotely control a door or gate. The camera module only works with an intercom indoor monitor and can also be used with the smartphone app. The VTO4202F-P1 cannot therefore work stand alone without an intercom monitor and with only the app.
€278,00 €219,00
-
Dahua DH-CS4006-4ET-60, 4xPoE 100Mb ports, Smart Switch, 2x Uplink Gigabit
Dahua DH-CS4006-4ET-60, 4xPoE 100Mb ports, Smart Switch, 2x Uplink Gigabit Can be used as a Cloud managed, web managed or unmanaged switch: By default, the IP address is set to DHCP and is obtained automatically. The switch is also configured in such a way that it should not cause any problems with third-party network equipment. This makes the switch plug & play and just as easy to use as an unmanaged switch Fully integrated with Dahua DoLynk: Dolynk is a cloud management environment for the installer. The cloud managed switches can be fully configured and monitored from this environment or with the Dolynk app Managed switch functions, the following functions are available STP, spanning tree protocol VLAN, suitable for working with virtual networks PoE management, configure PoE properties per port Specification Details Includes power adapter Yes PoE Yes Ethernet ports 4 Ethernet port speed 10/100 Mbps Ethernet port uplink speed 10/100/1000 Mbps Description of function slots Port 1-4: 4 × RJ-45 10/100 Mbps (PoE) Port 5-6: 2 × RJ-45 10/100/1000 Mbps (uplink) Reset button 1 Nutrition External power supply: 53 VDC, 1,226 A Operating temperature –10 °C to +55 °C (+14 °F to +131 °F) Operating humidity 5%–95% (RH), non-condensing Storage temperature –40 °C to +70 °C (–40 °F to +158 °F) Storage humidity 5%–95% (RH), non-condensing Energy consumption Stationary: ≤3 W ; Full load: 65 W Low Layer 2 Type of management Yes Smart Managed Switch Yes MTBF 232.62 years Switch capacity 4.8Gbps Packet forwarding capacity 3.57 Mpps Packet buffer size 4 Mbit Jumbo Frame 9216 Byte MAC table size 8K VLAN number 32 Standard communication IEEE802.3; IEEE802.3u; IEEE802.3x; IEEE802.3ab PoE protocol IEEE802.3af; IEEE802.3at; Hi PoE PoE power Port 1 ≤ 60 W, Port 2-4 ≤ 30 W, total ≤ 60 W PoE power management Yes PoE pin assignment 1,2,4,5?V+?,3,6,7,8?V-? Long-distance PoE transmission Yes VLAN function Port-based VLAN IEEE 802.3x Flow Control Yes DHCP function DHCP Client Equipment management Web management; App management Static protection Air discharge: 8 kV; Contact discharge: 6 kV Protection against lightning Common mode: 4 kV; Differential mode: 2 kV Net weight 0.28kg (0.64lb) Gross weight 0.92kg (2.02lb) Product dimensions 130 mm × 90 mm × 26 mm (5.11" × 3.54" × 1.02") (L × W × H) Packaging dimensions 265 mm × 238 mm × 76 mm (10.43" × 9.37" × 2.99") (L × W × H) Housing material Metal plate Installation Desk mounting; wall mounting
€69,00 €59,00
-
Dahua VTH5221DW 7'' WiFi intercom door monitor
Dahua VTH5221DW 7" WiFi intercom door monitor The Dahua 7'' WiFi intercom indoor monitor is equipped with the latest technology and is intended for Dahua's IP intercom system. Ideal to use as a second indoor monitor.
€393,25 €294,93
-
Alarma Total proximity card MIFARE
proximity card MIFARE card can be used with all 13.56MHz readers such as the Dahua and Hikvision outpost intercom set or other access control and intercom systems.
€2,90
-
Dahua VTNS2003B Two-wire switch
Dahua VTNS2003B-2 Two-wire switch The VTNS2003B-2 is a switch for products from the new generation of Dahua Video Intercom products. The communication of this generation of video intercom products uses the SIP protocol. This protocol ensures a good speaking-listening connection and offers options for integration with third parties. The 2-wire technology simplifies installation and offers the ability to connect multiple posts to one cable. Pros: Multiple devices on one 2-wire connection: With this generation it is possible to connect multiple products in series via the "out" port. The switches can also be connected to each other via 2 wires. Each switch must be separately supplied with 48VDC. 2 wires for one system: Both the power supply for the indoor and outdoor stations and the data transmission go through the same cable. The posts can be placed in one line, making 2 wires sufficient for a working system. TCP-IP network protocol: Despite the 2-wire technology, the stations work just like regular network products. This means that each post must have its own unique IP address. The major advantage of this is that posts connected to this 2-wire switch can be combined with the PoE products and the 2-wire products from the previous generation. Suitable for DMSS and DSS Pro: Because the 2-wire products are simply part of the network, they can also be used with the DMSS app or DSS Pro management software Points of attention: Not suitable for all 2-wire products: This switch is not suitable for all Dahua 2-wire intercom products. Products from older generations are not supported by this switch Maximum 2 outdoor stations per switch: A maximum of 2 VTO outdoor stations can be connected per switch. If there are more outposts, they must be connected to the next switch. The switches can be linked together Maximum 2 extensions per VTH internal station: A maximum of 2 additional extensions can be added to a VTH indoor unit. If there are more than one, it is recommended to connect the VTH to each other via a PoE switch. VTNS2003-B For 6 devices or less, a 48VDC power supply of 1.25A is sufficient For 6 to 22 devices, a 48VDC power supply of 5A is recommended. Advice Recommended cabling: 4x0.5mm² with a maximum resistance of 4Ω per 100 meters. Maximum distance 50 meters 2x0.5mm² with a maximum resistance of 3.9Ω or less per 100 meters. Maximum distance 50 meters UTP Cat5e 0.45mm with a maximum resistance of 12Ω per 100 meters. Maximum distance with 6 VTH is 50 meters, with 12 VTH this is 30 meters. Lock control by external power supply: In theory, the power supply and control of locks and doors could also be done from the switch. However, this can have a negative effect on the operation and mutual communication of the indoor and outdoor stations and is therefore not recommended.
€162,14 €121,60
-
Dahua VTM115 surface-mounted housing for the outdoor station
VTM115 surface-mounted housing for the outdoor station Dahua : Surface mounting box for VTO2202F(-P) 129 x 95 x 28.50mm
€26,62 €19,96
-
Dahua VTO2202F-P-S3 outpost, IP and 2-wire, 160° camera, PoE
VTO2202F-P-S3 outpost, IP and 2-wire, 160° camera, PoE Dahua, door station, IP and 2-wire use, 2MP WDR camera with IR light, Mechanical button, Night vision & voice indicator, 160° viewing angle. Power supply via 2-wire, front plate in aluminum alloy, IP55 & IK07, surface-mounted and flush-mounted box not included, power supply via 2wire or PoE. Exclusively available in surface-mounted or surface-mounted housing with rain cover, see related products below. The VTO2202F-P-S3 is an outdoor station from the new generation of Dahua Video Intercom products. The communication of this generation of video intercom products uses the SIP protocol. This protocol ensures a good speaking-listening connection and offers options for integration with third parties. The appearance of the outdoor station has been modernized, vandal-resistant and IP55. The VTO2202F-P-S3 is suitable for both IP and/or 3rd generation 2-wire Intercom products. The VTO2202F-P-S3 is compatible with all Dahua Video Intercom IP products from firmware version 4.3. Pros: PoE: This intercom is suitable for PoE. This makes it possible to provide the module with power and network connection with one network cable. This does not include power supply for the door lock. Stand-alone: This outdoor station can be used standalone as a video doorbell. This means that the outdoor station can be directly linked to the Dahua DMSS app. 2nd Door control from secured area with the DEE1010B: The DEE1010B is a module that can be connected to the main module via RS485. This allows additional contacts to be added to the VTO2202F-P-S2 system over a secure connection. The most important connection on the module is the NO/NC relay. This can be used as a 2nd door control. Suitable for PoE and 2-wire communication: The VTO2202F-P-S2 is suitable for IP technology with power supply over PoE and can simultaneously combine this with 2-wire communication. Push notifications in DMSS app: It is possible to receive push notifications in the DMSS app. By adding the outdoor station to the app. An internal station is not necessary for this VTO. Points of attention: H.265: By default, the video compression is set to H.265, however, some indoor units only support H.264. The compression can be changed in the VTO settings Lighting: The nameplate of the VTO is not illuminated, which makes the nameplate less readable in the dark 3rd generation 2-wire switches cannot be used in combination with 2nd generation 2-wire switches: The S3 models support 3rd generation 2-wire communication. This also means that they are not suitable for combining with the previous 2nd generation switches. Based on IP, these generations are compatible with each other. By linking both switches together based on IP, mutual communication is possible Door lock power supply not via PoE: An external power supply is required to power a door lock. Sealing: The front of the outdoor station is IP65, the rear still needs to be sealed Notifications/Notifications in DMSS may be delayed: When you ring the doorbell, the notifications are sent directly by the outdoor station, so they generally arrive quickly. But they can also arrive delayed. Various factors influence this, such as internet speed on the sending and receiving side, traffic on Dahua's cloud servers and the status of the notification servers of Apple and Android. External bell/buzzer only possible in combination with VTH:Without an internal unit, this outdoor unit cannot control an external doorbell Advice: Outdoor installation: The intercom unit is IP65 and therefore suitable for outdoor installation. It is spray-proof up to 12.5 liters per minute. The rear must be completely sealed off. Too much water can have a negative effect on the operation of the outdoor station. It is therefore advised to be careful when placing the intercom in the direct outdoors where wind and rain have free rein. DMSS app and push notifications for multiple users: Be careful with the number of users who will work with the app and this intercom system. The advice is to use no more than 5 users per push button. Also, the module is not powerful enough to send video and audio data to a large number of users at the same time, Multiple Dahua Outposts: It is possible to use multiple and different outdoor stations in one system. Please note that a maximum of 1 outdoor station can serve as a SIP server. The rest becomes subordinate. Keeps the firmware versions the same: Try to work as much as possible with the same firmware versions for the indoor and outdoor stations. The latest firmware can be found on the product under the downloads tab.
€359,37 €269,52
-
Dahua Video intercom set KTP01L incl. PoE switch, VTO2201F-P and VTH2421FW-P indoor unit
Dahua Video intercom set KTP01L incl. PoE switch, VTO2201F-P and VTH2421FW-P indoor unit A professional IP video intercom kit from Dahua with IP network cable connectionThis intercom is supplied complete (excl. cables) and consists of a 7 inch LCD monitor, an outdoor station video intercom panel with 2 megapix camera and a metal extension housing (can be mounted directly on the wall). The video intercom comes with a free-to-use mobile app. You can use this app to call the outdoor station, but also to open the door remotely. You will also receive a push notification when someone rings the doorbell. This system has an IP network cable connection, which means that all connections are made via network cables. The PoE switch is included.Other functions: Recording on SD card (excl) All communication takes place via IP network cables Possibility to connect and operate an electric door lock Video calling via the monitor or via the app Communicate with the visitor Connecting multiple indoor monitors is possible IP door station: 2MP CMOS camera Mechanical button Night vision & voice indication 160° viewing angle Group call Aluminum alloy plate IP55 & IK07 Construction PoE Expandable to a maximum of 3 indoor stations IP indoor monitor: IPC supervision Alarm integration Built-in 8GB SD card PoE What's in the package?1 x Indoor post DH-VTH2421FW-P1 x Outpost DH-VTO2202F-P1 x Surface-mounted box VTM115 for outpost1 x PoE Switch PFS3005-4ET-6
€722,37 €539,00
-
Dahua VTH5441G Indoor unit, 10 inch touch screen, Full HD, internal memory 8GB SD, SIP, PoE
VTH5441G Indoor unit, 10 inch touch screen, Full HD, internal memory 8GB SD, SIP, PoE 10 inch capacitive touch screen Monitor, resolution 1024 x 600, 1 x 10/100Mbps network connection, supports up to 8 outdoor stations, internal communication between multiple VTH monitors possible, display of IPC cameras possible, equipped with SD card slot, snapshot recording when ringing the doorbell or monitoring possible on SD card, door opening possible remotely, supported smartphone App (Plus version), power supply PoE or 12Vdc, surface mounting.
€589,27 €441,95
-
Dahua VTM114 flush-mounted housing for the outdoor station, silver color
VTM114 built-in housing for the outdoor station Dahua, built-in mounting box for VTO2202F(-P) dimensions frame 163 x 129, box 157 x 123x 33
€33,88 €25,41
-
€79,00 €59,00
-
Dahua DH-VTM123 Desk stand for VTH24xx
DH-VTM123 Desk stand for VTH24x Dahua Desktop Bracket Size: 190mm*100mm*54mm Dip angle: 45° Desktop mounted bracket for indoor monitor
€29,04 €21,78
-
Dahua VTO4202F-MS Display module
Display module for the Dahua intercom line. In beautiful silver luxury version.
€90,75 €68,06
-
Dahua VTM52R2 Rain cover Surface-mounted for VTO42xx for 2 modules
VTM52R2 Rain cover Surface-mounted VTO42xx for 2 modules Surface-mounted rain cover for the Dahua intercom line VTO42xx series. In beautiful silver luxury version. Product Info
€101,64 €49,00
You have 24 of the 78 products seen