Hikvision door controllers

Complete Pro door controller, 1 door, DS-K2601Hikvision access control combines all disciplines into one VMS, one software package!In addition to video and intercom, this addition also allows access control. The wide choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very complete solution.You can configure groups of users and login details, access cards and codes. Hikvision access control supports cards, codes, QR codes, fingerprints and from mid-2018 also faces and license plates.The DS-K2600 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of the system. The controller also supports offline operation and is designedwith tamper switch. Door controllers from the DS-K2600 series support smart functions such as anti-passback and first pass. For example, anti-passback prevents a card from being used by two people because the card must first be used to leave the zone before the zone can be re-entered. Anti-passback can be set over the system, even when it has to be applied over a combination of door controllers, even when the software is not running and the door controller is not connected to the network.Presence functions ensure that you can see how long employees have been in the building. When you add the hourly rate, the system will immediately let you know what the costs are.Overtime and absence can also be easily filtered.You can load a map to easily see where the controller is located and click on the corresponding camera. Link the cameras to events so that there are video pop-ups with live images and captured images. You can look back at this immediately. Specifications:Linkable card readers: 2 Wiegand readers & 2 RS485 readersInput interface: 4 alarm inputs, By Magnetic×1, By Switch×1, Case Input×2, Tamper-proof×1; Output interface: By Switch Relay×1Alarm Relay×1Uplink Communication Interface: TCP/IP Network Interface and RS-485 InterfaceMemory100,000 cards and 300,000 eventsDoor controller information:• 32-bit high-speed processor• TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure data security.• The recognition and storage of card number with up to 20 digitsMassive storage with 100,000 (can be issued to 200,000) cards information and 300,000 (can be issued to 600,000) access control events.• Supports multi-door interlocking function (DS-K2602, and DS-K2604), anti-passback function, multi-card function, first card function, super card and super password function.• Online upgrade function and online remote control of the doors.• Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, duress card and code alarm, blacklist alarm and invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.• Supports zone alarm input• Supports RS485 interface and Wiegand interface for card reader access. Wiegand interface supports W26/W34 and is seamlessly compatible with third-partyparty card reader with Wiegand interface.• Supports various card types such as normal/blocked/blacklist/patrol/guest/force/super card, etc.;• Various indicators to show different device status• Supports time synchronization via NTP, manual or automatic method• Watchdog to perform device status detection.• Data can be stored permanently when the controller is turned off

Read more less

Basic+ door controller, 4 doors, DS-K2804Hikvision access control combines all disciplines into one VMS, one software package!In addition to video and intercom, this addition also allows access control. The wide choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very complete solution.You can configure groups of users and login details, access cards and codes. Hikvision access control from the Basic+ series supports cards and codesThe DS-K2800 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of the system. The controller also supports offline operation and is designedwith tamper switch. Presence functions ensure that you can see how long employees have been in the building. When you add the hourly rate, the system will immediately let you know what the costs are.Overtime and absence can also be easily filtered.You can load a map to easily see where the controller is located and click on the corresponding camera. Link the cameras to events so that there are video pop-ups with live images and captured images. You can look back at this immediately. Specifications:Linkable card readers: Wiegand readers Input interface: 4 alarm inputs, By Magnetic×4By Switch×4Case Input×4Tamper-proof×1; Output interface: By Switch Relay×4Alarm Relay×4Uplink Communication Interface: TCP/IP Network Interface and RS-485 InterfaceMemory10,000 cards and 300,000 eventsDoor controller information:• 32-bit high-speed processor• TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure data security.• The recognition and storage of card number with up to 20 digits• Storage of 50,000 events• Supports first card function, super card and super password function.• Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, duress card and code alarm, blacklist alarm and invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.• Supports zone alarm input• Supports Wiegand interface to access the card reader. Wiegand interface supports W26/W34 and is seamlessly compatible with third-partyparty card reader with Wiegand interface.• Supports various card types such as normal/blocked/blacklist/patrol/guest/force/super card, etc.;• Various indicators to show different device status• Supports time synchronization via NTP, manual or automatic method• Watchdog to perform device status detection.• Data can be stored permanently when the controller is turned off

Read more less

Complete Pro door controller, 2 doors, DS-K2602Hikvision access control combines all disciplines into one VMS, one software package!In addition to video and intercom, this addition also allows access control. The wide choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very complete solution.You can configure groups of users and login details, access cards and codes. Hikvision access control supports cards, codes, QR codes, fingerprints and from mid-2018 also faces and license plates.The DS-K2600 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of the system. The controller also supports offline operation and is designedwith tamper switch. Door controllers from the DS-K2600 series support smart functions such as anti-passback and first pass. For example, anti-passback prevents a card from being used by two people because the card must first be used to leave the zone before the zone can be re-entered. Anti-passback can be set over the system, even when it has to be applied over a combination of door controllers, even when the software is not running and the door controller is not connected to the network.Presence functions ensure that you can see how long employees have been in the building. When you add the hourly rate, the system will immediately let you know what the costs are.Overtime and absence can also be easily filtered.You can load a map to easily see where the controller is located and click on the corresponding camera. Link the cameras to events so that there are video pop-ups with live images and captured images. You can look back at this immediately. Specifications:Door controller information:• 32-bit high-speed processor• TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure data security.• The recognition and storage of card number with up to 20 digitsMassive storage with 100,000 (can be issued to 200,000) cards information and 300,000 (can be issued to 600,000) access control events.• Supports multi-door interlocking function (DS-K2602, and DS-K2604), anti-passback function, multi-card function, first card function, super card and super password function.• Online upgrade function and online remote control of the doors.• Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, duress card and code alarm, blacklist alarm and invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.• Supports zone alarm input• Supports RS485 interface and Wiegand interface for card reader access. Wiegand interface supports W26/W34 and is seamlessly compatible with third-partyparty card reader with Wiegand interface.• Supports various card types such as normal/blocked/blacklist/patrol/guest/force/super card, etc.;• Various indicators to show different device status• Supports time synchronization via NTP, manual or automatic method• Watchdog to perform device status detection.• Data can be stored permanently when the controller is turned offLinkable card readers: 2 Wiegand readers & 2 RS485 readersInput interface: 4 alarm inputs, By Magnetic×1, By Switch×1, Case Input×2, Tamper-proof×1; Output interface: By Switch Relay×1Alarm Relay×1Uplink Communication Interface: TCP/IP Network Interface and RS-485 InterfaceMemory100,000 cards and 300,000 events

Read more less

Basic+ door controller, 2 doors, DS-K2802Hikvision access control combines all disciplines into one VMS, one software package!In addition to video and intercom, this addition also allows access control. The wide choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very complete solution.You can configure groups of users and login details, access cards and codes. Hikvision access control from the Basic+ series supports cards and codesThe DS-K2800 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of the system. The controller also supports offline operation and is designedwith tamper switch. Presence functions ensure that you can see how long employees have been in the building. When you add the hourly rate, the system will immediately let you know what the costs are.Overtime and absence can also be easily filtered.You can load a map to easily see where the controller is located and click on the corresponding camera. Link the cameras to events so that there are video pop-ups with live images and captured images. You can look back at this immediately. Specifications:Linkable card readers: Wiegand readers Input interface: 4 alarm inputs, By Magnetic×2By Switch×2Case Input×2, Tamper-proof×1; Output interface: By Switch Relay×2Alarm Relay×2Uplink Communication Interface: TCP/IP Network Interface and RS-485 InterfaceMemory10,000 cards and 300,000 eventsDoor controller information:• 32-bit high-speed processor• TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure data security.• The recognition and storage of card number with up to 20 digits• Storage of 50,000 events• Supports first card function, super card and super password function.• Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, duress card and code alarm, blacklist alarm and invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.• Supports zone alarm input• Supports Wiegand interface to access the card reader. Wiegand interface supports W26/W34 and is seamlessly compatible with third-partyparty card reader with Wiegand interface.• Supports various card types such as normal/blocked/blacklist/patrol/guest/force/super card, etc.;• Various indicators to show different device status• Supports time synchronization via NTP, manual or automatic method• Watchdog to perform device status detection.• Data can be stored permanently when the controller is turned off

Read more less

Basic+ door controller, 1 door, DS-K2801Hikvision access control combines all disciplines into one VMS, one software package!In addition to video and intercom, this addition also allows access control. The wide choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very complete solution.You can configure groups of users and login details, access cards and codes. Hikvision access control from the Basic+ series supports cards and codesThe DS-K2800 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of the system. The controller also supports offline operation and is designedwith tamper switch. Presence functions ensure that you can see how long employees have been in the building. When you add the hourly rate, the system will immediately let you know what the costs are. Overtime and absence can also be easily filtered.You can load a map to easily see where the controller is located and click on the corresponding camera. Link the cameras to events so that there are video pop-ups with live images and captured images. You can look back at this immediately. Specifications:Linkable card readers: Wiegand readers Input interface: 4 alarm inputs, By Magnetic×1, By Switch×1, Case Input×2, Tamper-proof×1; Output interface: By Switch Relay×1Alarm Relay×1Uplink Communication Interface: TCP/IP Network Interface and RS-485 InterfaceMemory10,000 cards and 300,000 eventsDoor controller information:• 32-bit high-speed processor• TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure data security.• The recognition and storage of card number with up to 20 digits• Storage of 50,000 events• Supports first card function, super card and super password function.• Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, duress card and code alarm, blacklist alarm and invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.• Supports zone alarm input• Supports Wiegand interface to access the card reader. Wiegand interface supports W26/W34 and is seamlessly compatible with third-partyparty card reader with Wiegand interface.• Supports various card types such as normal/blocked/blacklist/patrol/guest/force/super card, etc.;• Various indicators to show different device status• Supports time synchronization via NTP, manual or automatic method• Watchdog to perform device status detection.• Data can be stored permanently when the controller is turned off

Read more less

Pro complete door controller, 4 doors, DS-K2604Hikvision access control combines all disciplines into one VMS, one software package!In addition to video and intercom, this addition also allows access control. The wide choice of door controllers, card readers, fingerprint scanners and other innovative equipment make it a very complete solution.You can configure groups of users and login details, access cards and codes. Hikvision access control supports cards, codes, QR codes, fingerprints and from mid-2018 also faces and license plates.The DS-K2600 series access controller is designed with the latest structure with the TCP/IP and RS485 communication interface. The communication data is encrypted to improve the security of the system. The controller also supports offline operation and is designedwith tamper switch. Door controllers from the DS-K2600 series support smart functions such as anti-passback and first pass. For example, anti-passback prevents a card from being used by two people because the card must first be used to leave the zone before the zone can be re-entered. Anti-passback can be set over the system, even when it has to be applied over a combination of door controllers, even when the software is not running and the door controller is not connected to the network.Presence functions ensure that you can see how long employees have been in the building. When you add the hourly rate, the system will immediately let you know what the costs are.Overtime and absence can also be easily filtered.You can load a map to easily see where the controller is located and click on the corresponding camera. Link the cameras to events so that there are video pop-ups with live images and captured images. You can look back at this immediately. Specifications:Linkable card readers: 2 Wiegand readers & 2 RS485 readersInput interface: 4 alarm inputs, By Magnetic×1, By Switch×1, Case Input×2, Tamper-proof×1; Output interface: By Switch Relay×1Alarm Relay×1Uplink Communication Interface: TCP/IP Network Interface and RS-485 InterfaceMemory100,000 cards and 300,000 eventsDoor controller information:• 32-bit high-speed processor• TCP/IP network communication, with self-adaptive network interface. The communication data is encrypted to ensure data security.• The recognition and storage of card number with up to 20 digitsMassive storage with 100,000 (can be issued to 200,000) cards information and 300,000 (can be issued to 600,000) access control events.• Supports multi-door interlocking function (DS-K2602, and DS-K2604), anti-passback function, multi-card function, first card function, super card and super password function.• Online upgrade function and online remote control of the doors.• Supports alarm event upload (including tamper-resistant alarm, unsecured door alarm, forced entry alarm, delayed door alarm, duress card and code alarm, blacklist alarm and invalid card swiping attempts alarm), Short circuit attempts alarm and open circuit attempts alarm.• Supports zone alarm input• Supports RS485 interface and Wiegand interface for card reader access. Wiegand interface supports W26/W34 and is seamlessly compatible with third-partyparty card reader with Wiegand interface.• Supports various card types such as normal/blocked/blacklist/patrol/guest/force/super card, etc.;• Various indicators to show different device status• Supports time synchronization via NTP, manual or automatic method• Watchdog to perform device status detection.• Data can be stored permanently when the controller is turned off

Read more less