Discount rule (no Reolink, Anker, Nuki)
-
AlarmsysteemExpert.nl SP-4003R Outdoor Siren with Red LED Flash
SP-4003R Outdoor Siren with Red LED Flash SP-4003 R is an optical-acoustic siren/strobe designed for outdoor installation, featuring super bright LEDs and a piezoelectric transducer. Two optical LED strips placed on the sides of the housing increase the visibility of the alarm, even from a distance and in daylight. It offers three types of modulated tones of 120 dB intensity to choose from. The casing of the siren is made of polycarbonate, which ensures high mechanical strength and an aesthetic appearance of the device that remains unchanged over time. A simple but attractive design of the housing makes it ideal even for a modern facade. The device is equipped with tamper protection against opening or removal from the wall, and a galvanized plate inside also protects the electronics board and transducer against mechanical damage. The electronic circuits are weatherproof, so they can also withstand the effects of harsh outdoor environmental conditions. Supply voltage 12V DC ±20% Siren power consumption 90mA Flash power consumption 450mA Loudness 120 dB Working temperature -35°C to +60°C Dimensions (W x H x D) 148 x 254 x 64mm
€129,00 €116,00
-
Nedis UTP CAT6 network cable 1.0m
Unshielded patch cable for CAT6 installations, suitable for 10/100/1000mbit network applications. Connector design - side B: Straight Connector design - side A: Straight Cable design: Round Packaging type: Label Cable length: 1.0 m Plug finish: Gold plated Cable jacket material: PVC Maximum bandwidth: 1 Gbps Frequency: 250 MHz Cable type: CAT6 Conductor material: CCA Color: Gray AWG size: 27 Material: PVC Plug B: RJ45 Male Plug A: RJ45 Male Number of products in packaging: 1 Piece Shielding: U/UTP Diameter: 6mm
€2,29
-
Dahua DHI-ARD323-W2(868), Magnetic Contact Wireless DEMO
DHI-ARD323-W2, Magnetic Contact Wireless, demo available from our showroom. Not used and complete original box. The DHI-ARD323-W2 is a wireless magnetic contact with apparent mounting for the Dahua alarm system, suitable for securing doors and windows. It has a reed contact, up to 40mm opening, 1 dry contact input, low battery warning, LED indicator and tamper protection. In addition, the contact can measure the temperature level with an accuracy of ±1°C in the range from -15°C to +65°C. The DHI-ARD323-W2 communicates bidirectionally at distances up to 1200 m in open space, using wireless frequency 868 MHz, with protection by AES128 encryption and frequency hopping. The sturdy housing, made of high-quality PC + ABS material, allows use at temperatures between -10°C and +55°C, and is designed for indoor applications. It is powered by a CR123A battery with an autonomy of up to 5 years. Specifications: Port Indicator Light - 1 × green alarm indicator Button - 1 × power buttonFunction Tamper Alarm - Yes Remote Upgrade - Cloud update Low Battery Alarm - Yes Test Mode - Yes Search - Signal strength detectionWireless Carrier Frequency - 868.0 MHz–868.6 MHz Communication Distance - Up to 1,200 m (3,937.01 ft) in an open space Communication Mechanism - Two-way Frequency Hopping - Yes Encryption Mode - AES128General Power Supply - CR123A battery Power Consumption - Max. 125mW Operating Temperature - –10 °C to +55 °C (+14 °F to +131 °F) (indoor) Operating Humidity - 10%–90% (RH) Product Dimensions - 100.2mm × 20.8mm × 20.3mm (3.94”× 0.82” ×0.80”) (L × W × H) Packaging Dimensions - 135.0 mm × 98.5 mm × 27.8mm (5.31" × 3.88" × 1.09") (L × W × H) Installation - Bracket mount Net Weight - 70g (0.15lb) Gross Weight - 115g (0.25lb) Certifications -CE Battery Life - 5 years Casing Material - PC + ABSTemperature Measuring Range - –15 °C to +65 °C (+18.8 °F to +149 °F) (indoor) Measuring Precision - ± 1 °C (± 33.8 °F) Resolution - 1 °C (33.8 °F)Specification Sensor - Reed Switch Scenario - Non-metal doors Movement Distance -
€62,92 €35,00
-
Dahua VTO2311R-WP 2MP Villa Video Doorbell WiFi PoE/12volt DEMO
DEMO version available from our showroom in new condition and complete in original box. 2 year warranty. The Dahua VTO2311R-WP is a narrow outdoor station for doorbell and access control systems. The design is only 5cm wide and 16cm long, making it easy to install on narrow surfaces. The outdoor station supports both PoE and Wi-Fi, so a separate power supply is sufficient when using Wi-Fi. A stable Wi-Fi connection is required for proper functioning of the DMSS app or communication with the indoor unit. It is also possible to use the outdoor station without an internal station, but then it is not possible to control an external bell. The outdoor station is supplied with a rain cover and a mounting bracket. With the card reader module, up to 3000 users can be created for access control. Specifications: System Main Processor - Built-in processor Button type - Mechanical Interoperability - ONVIF; C.G.I Network Protocol - RTSP; DNS; P2P; UPnP; RTP; RTMP; YES; SSH; HTTP/HTTPS; ONVIF Basic camera - 1/2.8" CMOS 2 MP HD camera Field of view - H: 110°; V: 62°; D: 133° WDR - 120dB Noise reduction - 3D NR; 2D NO Video compression - H.264; H.265 Video resolution - Main stream: 720p, WVGA, D1 and CIF ; - Substream: 1080p, WVGA, D1, QVGA and CIF Video frame rate - PAL: - 25fps NTSC: - 30 fps Video bitrate - 768 kbps–8 Mbps Light compensation - Automatic IR Day Night - Auto (ICR)/Color/B/W; Colour/B/W Audio Compression - G.711a; G.711u; PCM Audio input - 1 Audio output - Built-in speaker Audio mode - Two-way audio Audio Enhancement - Echo Cancellation/Digital Noise Reduction; Echo cancellation; Digital noise reduction Audio bit rate - 16 kHz, 16 bits Function Communication mode - Fully digital Unlock Mode - Card; app; indoor monitor Card type - IC card Automatic snapshot - Yes (SD card is inserted in the indoor monitor or door station) Exit Videos - Yes (SD card inserted in VTH/VTO is required) Web Configuration - Yes Wifi - Yes Wireless standard - IEEE 802.11b; IEEE 802.11g; IEEE 802.11n Wireless frequency range - 2.4 GHz Storage - Micro SD card (max. 256 GB) Achievement Map reading distance - 0cm–3cm (0"–1.18") Housing - PC+ABS Capacity Card capacity - 3000 Gate Shutdown button - 1 Door status detection - 1 Lock control - 1 Network Port - 1 × RJ-45 10/100 Mbps Ethernet port Alarm Tamper alarm - Yes General Appearance color - light gray Power supply - 12–33 V DC, 1 A; Standard PoE Charger - Optional Installation - Surface mounting Certifications - EC; FCC Accessories - Included: Alarm power ribbon cable, rain cover Product Dimensions - 160mm × 50mm × 30mm (6.30" × 1.97" × 1.18") Protection - IP65 Operating temperature - –40 °C to +60 °C (–40 °F to +140 °F) control humidity - 10%–90% (RH), non-condensing Operating altitude - 0 m–3,000 m (0 ft–9,842.51 ft) Power consumption - ≤ 3.5 W (standby), ≤ 6 W (operating) Gross weight - 0.4 kg (0.88 lb) Net weight - 0.18 kg (0.40 lb)
€249,00 €149,00
-
Dahua DHI-ARA24-W2(868) Wireless Keyfob DEMO
DHI-ARA24-W2(868) wireless keyfob DEMO Available from our showroom in original box and in new, unused condition. This Dahua Keyfob DHI-ara24-W2 is a remote control for the Dahua alarm system. With this keyfob you can arm and disarm the alarm. 4 buttons: Power on, Power off, Home mode, SOS. Remote configuration, cloud upgrade and status check (via mobile App). Built-in battery for up to 5 years, and supports low battery alarm. Frequency hopping, two-way communication and AES128 encryption algorithm ensure stability and security of communication, with a range of up to 1,300 m in an open space. Specifications: Port Indicator Light - 1 × two-color status indicator (green: normal, red: abnormal) Button - 4 (Home, Away, Disarm, and SOS)Function Remote Upgrade - Cloud update Low Battery Alarm - Yes Search - Signal strength detectionWireless Carrier Frequency - 868.0 MHz–868.6 MHz Communication Distance - Up to 900 m (2,952.76 ft) in an open space Communication Mechanism - Two-way Encryption Mode - AES128 Frequency Hopping - YesGeneral Power Supply - CR2032 battery Power Consumption - Max. 100mW Operating Temperature - –10 °C to +55 °C (+14 °F to +131 °F) (indoor) Operating Humidity - 10%–90% (RH) Product Dimensions - 60.0 mm × 39.5 mm × 15.0 mm (2.36" × 1.56" × 0.59")(L × W × H) Packaging Dimensions - 135.0 mm × 98.5 mm × 27.8 mm (5.31" × 3.88" × 1.09") (L × W × H) Net Weight - 20g (0.04lb) Gross Weight - 65g (0.14lb) Certifications - CE Casing - PC + ABS Battery - Life 5 years
€44,77 €25,00
-
Dahua DHI-ARD1731-W2, Wireless PIR Camera DEMO
DHI-ARD1731-W2, Wireless PIR Camera, DEMO Available from our showroom, 1x complete in box and as new. Wireless PIR detector with camera and infrared lighting.The camera allows you to view the video of triggered alarm events. By displaying the images in real time, you can respond quickly and accurately to current alarm events.The PIR detector sends high-resolution images from the camera to the alarm hub, which forwards them to the mobile app or the alarm center (CMS/ARC).The device uses RF-HD 2.4 GHz image transmission technology, which ensures fast transmission of up to 6 HD images with a resolution of 1600 x 1200 pixels within 10 seconds.The device is designed for use with Dahua wireless access control systems operating on the 868 MHz band. Specifications: Video Field of View - 88° (H);68° (V) Image Type - JPEG Resolution - 1600 × 1200; 1280×960; 640×480; 320×240 Frame Rate - 2 Illumination Mode - Infrared Light Illumination Range - 12 m (39.37 ft) Day/Night Switch - Color/Black & WhiteFunction Indicator Light - 1 × green alarm indicator Button - 1 × power switch Remote Update - Cloud update Low Battery Detection - Yes Battery Level Display - Yes Tamper - Tamper alarm Signal Strength - RF Signal test RF-HD signal testTechnical Detection Mode - PIR Sensitivity - 3 levels adjustable Detection Range - 12 m (39.37 ft) (86°) with installation height of 2.2 m (7.22 ft) Detection Speed - 0.3 m/s–3 m/s (0.98 ft/s–9.84 ft/s) Pet Immunity Level - ≤18 kg (39.68 lb) White Light Resistance Level - 2000 lux Two-way Digital Temperature Compensation - Yes Scenario - Indoor Operating Current - 65 µA Alarm Current : Day: 170 mA (Avg); 800 mA (Max) Night: 230 mA (Avg); 2.8A (Max)Wireless Carrier Frequency - RF:868.0 MHz–868.6 MHz RF-HD:2.4GHz Communication Distance - RF:Up to 1,600 m (5,249.34 ft) in an open space RF-HD:Up to 300 m (984.25 ft) in an open spaceCommunications Mechanism - Two way Frequency - Hopping Yes Encryption Mode - AES128General Power Supply - CR123A*3 Battery Life - 4 years (if triggered twice a week with a battery efficiency of 70% Operating Temperature - –10 °C to +55 °C (+14 °F to +131 °F) (indoor) Operating Humidity - 10%–90% (RH) Product Dimensions - 127.6 mm × 71.0 mm × 53.2 mm (5.02" × 2.80" × 2.09") Packaging Dimensions - 121.0 mm × 65.0 mm × 170.0 mm (4.76" × 2.56" × 6.69") Net Weight - 202g (0.45lb) Gross Weight - 333g (0.73lb) Installation - Wall mount Casing - PC + ABS Certifications CE
€225,06 €89,00
-
Ajax Systems FireProtect 2 RB (Heat/Smoke) replaceable batteries, White DEMO
FireProtect 2 is a new detector for fire detection. Externally, the sensor has two thermistors that detect a temperature increase as well as smoke. Demo model in new condition and complete. 1 year warranty. The AJAX FireProtect 2 RB (Heat/Smoke) - Advanced dual-mode fire detection Ensure the utmost security of your home or business with the AJAX FireProtect 2 RB (Heat/Smoke). This state-of-the-art fire detection device combines two powerful detection modes – heat and smoke – to provide comprehensive fire protection. With its advanced technology, reliability and versatility FireProtect 2 RB (Heat/Smoke) the ultimate solution for proactive fire prevention. The FireProtect 2 RB (Heat/Smoke) features dual-mode detection, combining both heat and smoke sensors for unparalleled accuracy in fire detection. The heat sensor is highly sensitive and quickly detects rapid temperature changes, while the advanced optical chamber ensures rapid detection of smoke particles, even in the early stages of a fire. This dual-mode approach ensures that FireProtect 2 RB (Heat/Smoke) Regardless of the type of fire, it is immediately ready to warn you. FireProtect 2 RB (Heat/Smoke) is seamlessly integrated into your AJAX security system and uses advanced wireless communication protocols to provide real-time notifications. Once a fire is detected, the device communicates directly with the AJAX Hub or AJAX Hub 2, immediately sending alerts to your smartphone or connected devices. Stay informed and take immediate action, wherever you are, to minimize the potential impact of a fire. FireProtect 2 RB (Heat/Smoke) is designed to meet the highest industry standards and offers exceptional reliability and performance. It works flawlessly over a wide temperature range, making it suitable for a variety of environments including homes, offices, warehouses and more. With a long battery life ensures FireProtect 2 RB (Heat/Smoke) for continuous protection without frequent maintenance or battery replacement. The FireProtect 2 RB (Heat/Smoke) integrates seamlessly into your AJAX ecosystem, making installation and customization easy. Control and manage your fire protection system through the intuitive AJAX mobile app, which provides an easy-to-use interface for adjusting sensitivity levels, creating automation rules, and adjusting settings. Customize your fire protection system to your specific needs and preferences. The FireProtect 2 RB (Heat/Smoke) is designed for effortless installation. Thanks to the wireless connectivity, you can easily mount the device on walls or ceilings without complicated wiring. Its sleek and discreet design ensures it blends seamlessly into any environment, providing effective fire detection whilst complementing the aesthetics of your space. Invest in proactive fire prevention with the AJAX FireProtect 2 RB (Heat/Smoke). Combining dual-mode detection, real-time alerts and seamless integration, it provides unparalleled fire safety for your property. Don't compromise on the safety of your loved ones and valuables - choose FireProtect 2 RB (Heat/Smoke) and experience the peace of mind that comes with superior fire detection technology.
€129,00 €89,00
-
Ajax Systems MotionCam Outdoor motion detector with photo camera DEMO
Ajax MotionCam Outdoor motion detector with camera for live verification, view what happens in your App in the event of an alarm. PLEASE NOTE: This product only works in combination with the HUB 2 and HUB 2 PLUS! This demo version comes from our showroom and is still in new condition and complete in original packaging with all accessories. There are only 2 screw holes in the bracket for hanging. 1 year warranty. The AJAX MotionCam Outdoor, is a security device designed to provide comprehensive outdoor surveillance. This advanced motion detector with built-in camera ensures the perimeter of your property is always secure, giving you peace of mind.The AJAX MotionCam Outdoor is a wireless outdoor motion detector that uses the latest technology to accurately detect movements up to a distance of 15 meters. When motion is detected, the built-in camera is activated, taking a series of high-resolution photos for visual verification. This feature not only allows you to be warned of possible intruders, but also visually confirms the cause of the alarm, reducing the chance of false alarms.One of the notable features of the MotionCam Outdoor is the possibility of night vision. Equipped with infrared illumination, the camera can capture clear images even in complete darkness, ensuring 24-hour security.The device is designed to withstand harsh weather conditions. The rugged housing is IP55 dust and water resistant, allowing it to work effectively in a variety of climates. The device can operate in temperatures from -25°C to 60°C, making it a reliable choice for any environment.The AJAX MotionCam Outdoor also features an anti-masking function and tamper alarm. These features ensure that the device is always operational and cannot be blocked, covered or dismantled without triggering an alarm.In summary, the AJAX MotionCam Outdoor a powerful outdoor motion detector with a built-in camera. Its advanced features, such as motion detection, visual verification, night vision and anti-masking function, make it a robust and reliable choice for securing the outdoor areas of your property.
€421,00 €239,00
-
Dahua DH-T4A-PV, 4MP Smart Dual Light Fixed-focal Wi-Fi Turret Network Camera DEMO
DH-T4A-PV, 4MP Smart Dual Light Fixed-focal Wi-Fi Turret Network Camera DEMO 2x Demo model complete and in original box in stock. 1 year warranty. The Dahua Smart Dual Illuminators technology uses smart algorithms to accurately detect targets. The IR lighting is normally on at night. When the target is detected by the camera, the warm light turns on and the camera records the full-color video and information about important events. When the target leaves the monitored area, the warm light turns off and the IR illumination turns back on, reducing light pollution in the area. Specifications: 4-MP 1/3" CMOS image sensor, low luminance, and high definition image. Outputs max. 4 MP (2560 ×1440)@25/30 fps. H.265 codec, high compression rate, ultra-low bit rate. Built-in warm light and IR LED, and the max. illumination distance is 30 m. SMART H.264+/H.265+, flexible coding, applicable to various bandwidth and storage environments. DWDR, 3D NR, HLC, BLC, digital watermarking, applicable to various monitoring scenes. Abnormality detection: Motion detection, video tampering, audio disconnection, IP conflict, illegal access and SMD(human). Supports max.256G Micro SD card; built-in microphone. 12 VDC power supply. IP67 protection. Supports human detection.
€149,00 €89,00
-
Dahua NVR4104-EI, DEMO 1x LAN, No PoE Suitable for 4 IP cameras
DEMO model of this small NVR from Dahua, without PoE. Complete in original box and 1 year warranty. The Dahua NVR4104-EI is a powerful network video recorder (NVR) designed for efficient and reliable surveillance operations. This device is equipped with 4 channels, allowing simultaneous recording from multiple cameras, making it an ideal choice for small to medium security setups. The NVR4000-EI series is equipped with WizSense technology, which allows AI to be added to cameras that do not yet have it. This built-in intelligence also makes it possible to find images quickly and intelligently via Quick Pick. The powerful hardware provides additional decoding capacity, making it possible to simultaneously record and display 4 x 8MP channels on a monitor. The Dahua NVR4104-EI supports recording up to 8MP resolution, guaranteeing high-quality video images. It also features H.265/H.264 decoding, which ensures efficient compression and high-quality video playback.With its Smart Add function, this NVR allows you to easily add and set up new cameras. It also supports Intelligent Video System (IVS) features such as line crossing and intrusion detection, giving your surveillance system an extra layer of security.The Dahua NVR4104-EI also offers remote access options. Using the Dahua mobile application or via a web browser, you can access live video feeds or play back recorded footage anywhere, anytime.In summary, the Dahua NVR4104-EI is a robust and reliable solution for your surveillance needs, with high-quality recording, easy installation and advanced security features.
€292,82 €99,00
-
Hikvision DS-KH6110-WE1 Indoor unit with 4.3 inch screen PoE/12v WiFi, WHITE
The indoor units can only display locally connected cameras on the screen, there is no functionality to display images via Hik-Connect on an indoor unit that is connected stand-alone.DS-KH6110-WE1 Indoor unit with 4.3 inch screen PoE/12v WiFi is a white small model indoor unit with WiFi. This new Hikvision DS-KH6110-WE1 intercom screen can be connected to all Hikvision IP doorbells of the 2nd generation. This can be connected via PoE to a PoE switch or via WiFi using an optional (see related products) 12 volt adapter. KH6 series IP-based indoor station with easy and fast installation: user-friendly design.4.3-inch colorful touchscreen with 480×272 resolution.Standard PoE power supply without additional power adapterConvenient Hik-Connect APP Mobile controlView live videos from door stations and linked camerasConvenient for users to customize functions according to their own usage habits with 4 custom touch buttons Specifications: System parameters Operating system - Linux ROM - 16MB RAM memory - 128 MB CPU - Built-in processor Display parameters Screen size - 4.3 inches Control method - Capacitive touchscreen with 9 touch buttons Type - Colorful TFT Resolution - 480×272 Audio parameters Audio compression standard - G.711 U, G.711 A Audio input - Built-in omnidirectional microphone Audio output - Built-in speaker Audio compression bit rate - 64 Kbps Audio quality - Noise reduction and echo cancellation Volume control - Adjustable Network parameters Communication protocol - TCP/IP, SIP, RTSP Wi-Fi standard - Wi-Fi 802.11 b/g/n, 2.4 GHz Device interfaces Network interface - 1 RJ-45 100 Mbps General Buttons - 9 touch buttons Installation - Wall mounting, table mounting Weight - With packaging: 336.6 g (0.7 lbs) Without packaging: 197.8 g (0.4 lbs) Operating temperature - -10°C to 50°C (14°F to 122°F) Operating Humidity - 10% to 90% Dimensions - 120mm × 120mm × 21mm (4.7" × 4.7" × 0.83") Application environment - Indoor Power consumption - ≤ 4 W
€159,00 €129,00
-
Hikvision DS-7716NXI-K4/16P, 16 Channel 16x PoE, Acusense, 4K Network Video Recorder
The Hikvision DS-7716NXI-K4/16P is a powerful 16-channel network video recorder (NVR) from the Pro series, designed for professional video surveillance with IP cameras — ideal for shops, businesses, schools, offices or home installations with multiple cameras. General 16-channel NVR from the Hikvision Pro series Supports up to 12 MP recording AcuSense technology (human/vehicle classification) Motion Detection 2.0 Video & Audio Max. recording resolution: 12 MP Video compression: H.265+, H.265, H.264+, H.264 HDMI output up to 4K (3840 × 2160) VGA output up to 1920 × 1080 16-channel synchronous playback Audio in/out: 1 channel in, 1 channel out Network & PoE 16 PoE ports (Power-over-Ethernet) Total PoE budget: approx. 200–230 W (depending on model) Supports ONVIF, TCP/IP, DHCP, IPv4/IPv6, NTP, HTTPS, RTSP Remote access via app/software (Hik-Connect / iVMS / HikCentral) Intelligent functions (AcuSense) Detection of people and vehicles Filtering of false alarms (leaves, rain, animals, etc.) Face detection and analysis Smart search in recordings Line crossing, intrusion detection (perimeter security) Storage 4 × SATA connections for internal HDDs Max. 10 TB per HDD (up to 40 TB total) USB 2.0 & USB 3.0 ports for export Network Management & Remote Access Web interface, PC software and mobile app VPN & security protocols for secure connections User management with rights structure Physical & Environment Housing: 19” rack-mountable (1.5U / 2U depending on series) Power supply: 100–240 V AC Operating temperature: -10 °C to +55 °C
€1.289,00
-
Ajax Systems Black cover for StreetSiren DoubleDeck
White cover for StreetSiren DoubleDeck Front plate for StreetSiren DoubleDeck Installation method: Clip and screw locking Color: Black Material: Plastic Temperature range: From -25°? up to +60° Permissible humidity: Up to 95% Dimensions: 184 × 184 × 17 mm Weight: 111g
€19,00 €13,99
-
Hikvision Surface-mounted box 2 modules 45° angle suitable for DS-KD-ACW2 AND DS-KD-ACF2
Corner bracket for surface mounting at an angle of 45° for a Hikvision modular video intercom system which consists of a camera module and, for example, a keypad or Mifare card reader in a 2-fold housing. If you order the DS-KD-ACF2 or DS-KD-ACW2, you can use the front panel to neatly finish this corner bracket.When the outdoor unit is mounted on the side wall of your front door or gate, this surface-mounted box allows you to better direct the video intercom towards the street and thus give your visitor and immediate surroundings a better view. Suitable for the DS-KD-ACW2 and DS-KD-ACF2 Size B107 x H217 x D97 mm
€149,00
-
Hikvision Surface-mounted box 1 module 45° angle suitable for DS-KIS702 & DS-KIS602 and KD8003
Corner bracket for surface mounting at a 45° angle of a Hikvision videophone door station DS-KIS702, DS-KIS602 and the single mounting frames for the Hikvision intercom.If your video door is mounted on the side wall of your front door, this surface-mounted box allows you to better direct the door frame towards the street and thus see your visitor and surroundings better. Suitable for door frames from Hikvision DS-KIS702 & DS-KIS602, KD8003 modular system. Please order a surface-mounted or flush-mounted box DS-KD-ACW1 or DS-KD-ACF1 so that you have the front plate to finish it off neatly.
€99,00
-
AlarmsysteemExpert.nl Light wood structure camera mast with tilt anchor 3 meters
Light wood structure metal camera mast with tilt anchor 90mm, 3 meters This camera mast is 3 meters and has a light-colored wood structure that gives it a classic look. It is equipped with a tilt anchor as standard. The base plate of the tilting anchor has a hole with a diameter of 20 mm, through which you can pull the cables. The mast is hollow, so you pull the cables through the mast. On top of the mast there is a black impact cap that closes the mast. You pour the tilting anchor into (fast) concrete in the ground. Because the camera has a tilt point at the bottom, you can also tilt it in an angle. This unique wooden structures metal camera mast gives a quiet, unobtrusive look in your garden. Price includes delivery in the Netherlands. We do not deliver these to the Wadden Islands. For deliveries outside the Netherlands, please contact us. This product is custom made especially for you and cannot be returned. Type camera mast Material extruded profile made of aluminum with the alloy AIMgSi 0.7 with a hardness of F27 according to DIN standard 1748. Without impurities and without transverse and longitudinal seams. Model mast Around 90mm mast size 90mm. Wall thickness 3 millimeters Mast length 3 meters above ground Color options Wood structure with grain, the ground mounting is also standard metal color Ground mounting standard with adjustable tilt anchor. Delivery time Camera masts in stock! Standard colours: Delivery time 3-7 working days, RAL color of your choice: + 15 working days. Installing it yourself is not difficult, this is easy with the supplied manual. Warranty 10-year warranty on mast breakage on the mast profile (emergencies excluded, see our general terms and conditions) Certifications alloy: DIN Norm 1748 = AIMgSi 0.7; EN Standard = AW-6005A, hardness: DIN Standard 1748 = F27 Environment mast profile made from 95% recycled material and 100% recyclable, mast profile Cradle to Cradle certificate Silver Weight 3 meters = 6.5 kilos Tilt anchor specifications threaded ends M16 thread, center to center distance 200 mm, in the base plate there is a hole Ø 50 mm through which the cables can be pulled, length of the sides of the base plate: 27 cm Exclusive cameras, cables, camera mounting and accessories. This product purely concerns the mast with ground mounting. Concrete Not included. Due to occupational health and safety regulations, this must be transported on a pallet/unloaded with a forklift. These costs are higher than concrete costs. You can get rapid concrete/turbo concrete at any hardware store. The installation instructions state how much you need. Other information These masts are supplied with a complete tilting anchor (threaded ends, nuts, everything is included)
€1.179,00 €1.079,00
-
AlarmsysteemExpert.nl Light wood structure camera mast with tilt anchor 4 meters
Light wood structure metal camera mast with tilt anchor 90mm, 4 meters This camera mast is 4 meters and has a light-colored wood structure that gives it a classic look. It is equipped with a tilt anchor as standard. The base plate of the tilting anchor has a hole with a diameter of 20 mm, through which you can pull the cables. The mast is hollow, so you pull the cables through the mast. On top of the mast there is a black impact cap that closes the mast. You pour the tilting anchor into (fast) concrete in the ground. Because the camera has a tilt point at the bottom, you can also tilt it in an angle. This unique wooden structures metal camera mast gives a quiet, unobtrusive look in your garden. Price includes delivery in the Netherlands. We do not deliver these to the Wadden Islands. For deliveries outside the Netherlands, please contact us. This product is custom made especially for you and cannot be returned. Type camera mast Material extruded profile made of aluminum with the alloy AIMgSi 0.7 with a hardness of F27 according to DIN standard 1748. Without impurities and without transverse and longitudinal seams. Model mast Around 90mm mast size 90mm. Wall thickness 3 millimeters Mast length 4 meters above ground Color options Wood structure with grain, the ground mounting is also standard metal color Ground mounting standard with adjustable tilt anchor. Delivery time Camera masts in stock! Standard colours: Delivery time 3-7 working days, RAL color of your choice: + 15 working days. Installing it yourself is not difficult, this is easy with the supplied manual. Warranty 10-year warranty on mast breakage on the mast profile (emergencies excluded, see our general terms and conditions) Certifications alloy: DIN Norm 1748 = AIMgSi 0.7; EN Standard = AW-6005A, hardness: DIN Standard 1748 = F27 Environment mast profile made from 95% recycled material and 100% recyclable, mast profile Cradle to Cradle certificate Silver Weight 4 meters = 7.5 kilos Tilt anchor specifications threaded ends M16 thread, center to center distance 200 mm, in the base plate there is a hole Ø 50 mm through which the cables can be pulled, length of the sides of the base plate: 27 cm Exclusive cameras, cables, camera mounting and accessories. This product purely concerns the mast with ground mounting. Concrete Not included. Due to occupational health and safety regulations, this must be transported on a pallet/unloaded with a forklift. These costs are higher than concrete costs. You can get rapid concrete/turbo concrete at any hardware store. The installation instructions state how much you need. Other information These masts are supplied with a complete tilting anchor (threaded ends, nuts, everything is included)
€1.299,00 €1.179,00
-
AlarmsysteemExpert.nl Square camera mast with tilt anchor 4 meters Black
Square camera mast with tilt anchor 12 x 12cm. RAL9005 Black, 4 meters This camera mast is 4 meters and completely finished in RAL9005 black, which gives it a modern look. It is equipped with a tilt anchor as standard. The base plate of the tilting anchor has a hole with a diameter of 50 mm, through which you can pull the cables. The mast is hollow, so you pull the cables through the mast. On top of the mast there is a black impact cap that closes the mast. You pour the tilting anchor into (fast) concrete in the ground. Because the camera has a tilt point at the bottom, you can also tilt it in an angle. Because the camera mast is square with dimensions of 12 x 12 cm. any camera mount fits directly onto it. The camera mast gives a sleek, modern look in a dark color. Price includes delivery in the Netherlands. We do not deliver these to the Wadden Islands. For deliveries outside the Netherlands, please contact us. This product is custom made especially for you and cannot be returned. Type camera mast Material extruded profile made of aluminum with the alloy AIMgSi 0.7 with a hardness of F27 according to DIN standard 1748. Without impurities and without transverse and longitudinal seams. Model mast square mast size 12 x 12 cm mm Wall thickness 3 millimeters Mast length 4 meters above ground Color options black RAL 9005 (semi-gloss), the ground mounting is also black Ground mounting standard with adjustable tilt anchor. Delivery time Camera masts in stock! Standard colours: Delivery time 3-7 working days, RAL color of your choice: + 15 working days. Installing it yourself is not difficult, this is easy with the supplied manual. Warranty 10-year warranty on mast breakage on the mast profile (emergencies excluded, see our general terms and conditions) Certifications alloy: DIN Norm 1748 = AIMgSi 0.7; EN Standard = AW-6005A, hardness: DIN Standard 1748 = F27 Environment mast profile made from 95% recycled material and 100% recyclable, mast profile Cradle to Cradle certificate Silver Weight 4 meters = 7.5 kilos Tilt anchor specifications threaded ends M16 thread, center to center distance 200 mm, in the base plate there is a hole Ø 50 mm through which the cables can be pulled, length of the sides of the base plate: 27 cm Exclusive cameras, cables, camera mounting and accessories. This product purely concerns the mast with ground mounting. Concrete Not included. Due to occupational health and safety regulations, this must be transported on a pallet/unloaded with a forklift. These costs are higher than concrete costs. You can get rapid concrete/turbo concrete at any hardware store. The installation instructions state how much you need. Other information These masts are supplied with a complete tilting anchor (threaded ends, nuts, everything is included)
€1.249,00 €1.149,00
-
AlarmsysteemExpert.nl Round camera mast with tilting anchor 2.50 meters
Camera mast with tilt anchor, diameter 70 mm, 2.50 meters This camera mast is 2.5 meters (available up to 3 meters). It is equipped with a tilt anchor as standard. The base plate of the tilting anchor has a hole with a diameter of 50 mm, through which you can pull the cables. The mast is hollow, so you pull the cables through the mast. On top of the mast there is a black impact cap that closes the mast. Your installer can drill a hole in the mast at the desired height through which the cable comes out and attach the camera to the mast. You pour the tilting anchor into (fast) concrete in the ground. Because each type of camera system has its own mounting brackets, we do not offer mounting brackets with this mast. Your installer or camera supplier will be able to supply the correct mounting brackets for your cameras! Price includes delivery in the Netherlands. We do not deliver these to the Wadden Islands. For deliveries outside the Netherlands, please contact us. This product is custom made especially for you and cannot be returned. Camera masts with a RAL color of your choice have a slightly longer delivery time of approximately 10 working days. Type camera mast Material extruded profile made of aluminum with the alloy AIMgSi 0.7 with a hardness of F27 according to DIN standard 1748. Without impurities and without transverse and longitudinal seams. Model mast cylindrical Mast diameter 70mm Wall thickness 3 millimeters Mast length 2.5 meters above ground Color options white RAL 9010 powder-coated, clear ("silver") anodized, black RAL 9005 (semi-gloss), RAL color of your choice in powder coating (semi-gloss), note: for the masts in RAL color (RAL 9010, RAL 9005 or RAL color of your choice), the mast profile is sprayed in color, the ground mounting remains standard. Ground mounting standard with adjustable tilt anchor. Delivery time Camera masts in stock! Standard colours: Delivery time 3-7 working days, RAL color of your choice: + 15 working days. Installing it yourself is not difficult, this is easy with the supplied manual. Warranty 10-year warranty on mast breakage on the mast profile (emergencies excluded, see our general terms and conditions) Certifications alloy: DIN Norm 1748 = AIMgSi 0.7; EN Standard = AW-6005A, hardness: DIN Standard 1748 = F27 Environment mast profile made from 95% recycled material and 100% recyclable, mast profile Cradle to Cradle certificate Silver Weight 3 meters = 5.5 kilos, 3.5 meters = 6.5 kilos Tilt anchor specifications threaded ends M16 thread, center to center distance 200 mm, in the base plate there is a hole Ø 50 mm through which the cables can be pulled, length of the sides of the base plate: 27 cm Specifications T-piece the T-piece is optionally available in white RAL 9010 and black RAL 9005. There is an impact cap (white/black) on both sides and on top. The T-piece is supplied separately, you slide this T-piece over the mast. There are 2 adjustment bolts, which you use to clamp it to the mast. Exclusive cameras, cables, camera mounting and accessories. This product purely concerns the mast with ground mounting. Concrete Not included. Due to occupational health and safety regulations, this must be transported on a pallet/unloaded with a forklift. These costs are higher than concrete costs. You can get rapid concrete/turbo concrete at any hardware store. The installation instructions state how much you need. Other information These masts are supplied with a complete tilting anchor (threaded ends, nuts, everything is included)
€659,00 - €829,00
-
AlarmsysteemExpert.nl Round camera mast with tilting anchor 3 meters Ø 90mm
Camera mast with tilt anchor, diameter 90 mm, 3 meters This camera mast is 3 meters (available 3 and 4 meters). It is equipped with a square tilting anchor as standard. The base plate of the tilting anchor has a hole with a diameter of 50 mm, through which you can pull the cables. The mast is hollow, so you pull the cables through the mast. On top of the mast there is a black impact cap that closes the mast. Your installer can drill a hole in the mast at the desired height through which the cable comes out and attach the camera to the mast. You pour the tilting anchor into (fast) concrete in the ground. Because each type of camera system has its own mounting brackets, we do not offer mounting brackets with this mast. Your installer or camera supplier will be able to supply the correct mounting brackets for your cameras!Price includes delivery in the Netherlands. We do not deliver these to the Wadden Islands. For deliveries outside the Netherlands, please contact us. This product is custom made especially for you and cannot be returned.Camera masts with a RAL color of your choice have a slightly longer delivery time of approximately 10 working days. Product Info
€749,00 - €908,00
-
AlarmsysteemExpert.nl Light wood structure camera mast with tilt anchor 3 meters
Light wood structure camera mast with tilt anchor 3 metersThis camera mast is 3 meters and has a dark-colored wood structure that gives it a classic look. It is equipped with a tilt anchor as standard. The base plate of the tilting anchor has a hole with a diameter of 50 mm, through which you can pull the cables. The mast is hollow, so you pull the cables through the mast. On top of the mast there is a black impact cap that closes the mast. You pour the tilting anchor into (fast) concrete in the ground. Because the camera has a tilt point at the bottom, you can also tilt it in an angle. This unique wooden structures metal camera mast gives a quiet, unobtrusive look in your garden. Price includes delivery in the Netherlands. We do not deliver these to the Wadden Islands. For deliveries outside the Netherlands, please contact us. This product is custom made especially for you and cannot be returned. Type camera mast Material extruded profile made of aluminum with the alloy AIMgSi 0.7 with a hardness of F27 according to DIN standard 1748. Without impurities and without transverse and longitudinal seams. Model mast Around 90mm mast size 90mm. Wall thickness 3 millimeters Mast length 3 meters above ground Color options Wood structure with grain, the ground mounting is also standard metal color Ground mounting standard with adjustable tilt anchor. Delivery time Camera masts in stock! Standard colours: Delivery time 3-7 working days, RAL color of your choice: + 15 working days. Installing it yourself is not difficult, this is easy with the supplied manual. Warranty 10-year warranty on mast breakage on the mast profile (emergencies excluded, see our general terms and conditions) Certifications alloy: DIN Norm 1748 = AIMgSi 0.7; EN Standard = AW-6005A, hardness: DIN Standard 1748 = F27 Environment mast profile made from 95% recycled material and 100% recyclable, mast profile Cradle to Cradle certificate Silver Weight 3 meters = 6.5 kilos Tilt anchor specifications threaded ends M16 thread, center to center distance 200 mm, in the base plate there is a hole Ø 50 mm through which the cables can be pulled, length of the sides of the base plate: 27 cm Exclusive cameras, cables, camera mounting and accessories. This product purely concerns the mast with ground mounting. Concrete Not included. Due to occupational health and safety regulations, this must be transported on a pallet/unloaded with a forklift. These costs are higher than concrete costs. You can get rapid concrete/turbo concrete at any hardware store. The installation instructions state how much you need. Other information These masts are supplied with a complete tilting anchor (threaded ends, nuts, everything is included)
€1.129,00 €1.079,00
-
AlarmsysteemExpert.nl Dark wood structure camera mast with tilt anchor 4 meters
Dark wood structure metal camera mast with tilt anchor 90mm, 4 meters This camera mast is 4 meters and has a dark-colored wood structure that gives it a classic look. It is equipped with a tilt anchor as standard. The base plate of the tilting anchor has a hole with a diameter of 20 mm, through which you can pull the cables. The mast is hollow, so you pull the cables through the mast. On top of the mast there is a black impact cap that closes the mast. You pour the tilting anchor into (fast) concrete in the ground. Because the camera has a tilt point at the bottom, you can also tilt it in an angle. This unique wooden structures metal camera mast gives a quiet, unobtrusive look in your garden. Price includes delivery in the Netherlands. We do not deliver these to the Wadden Islands. For deliveries outside the Netherlands, please contact us. This product is custom made especially for you and cannot be returned. Type camera mast Material extruded profile made of aluminum with the alloy AIMgSi 0.7 with a hardness of F27 according to DIN standard 1748. Without impurities and without transverse and longitudinal seams. Model mast Around 90mm mast size 90mm. Wall thickness 3 millimeters Mast length 4 meters above ground Color options Wood structure with grain, the ground mounting is also standard metal color Ground mounting standard with adjustable tilt anchor. Delivery time Camera masts in stock! Standard colours: Delivery time 3-7 working days, RAL color of your choice: + 15 working days. Installing it yourself is not difficult, this is easy with the supplied manual. Warranty 10-year warranty on mast breakage on the mast profile (emergencies excluded, see our general terms and conditions) Certifications alloy: DIN Norm 1748 = AIMgSi 0.7; EN Standard = AW-6005A, hardness: DIN Standard 1748 = F27 Environment mast profile made from 95% recycled material and 100% recyclable, mast profile Cradle to Cradle certificate Silver Weight 4 meters = 7.5 kilos Tilt anchor specifications threaded ends M16 thread, center to center distance 200 mm, in the base plate there is a hole Ø 50 mm through which the cables can be pulled, length of the sides of the base plate: 27 cm Exclusive cameras, cables, camera mounting and accessories. This product purely concerns the mast with ground mounting. Concrete Not included. Due to occupational health and safety regulations, this must be transported on a pallet/unloaded with a forklift. These costs are higher than concrete costs. You can get rapid concrete/turbo concrete at any hardware store. The installation instructions state how much you need. Other information These masts are supplied with a complete tilting anchor (threaded ends, nuts, everything is included)
€1.299,00 €1.189,00
-
AlarmsysteemExpert.nl Rejuvenated camera mast with tilting anchor and inspection hatch, 5 meters
This reduced camera mast is 5 meters (available 5 - 6 meters). It is equipped with a tilting anchor and inspection hatch as standard. The base plate of the tilting anchor has a hole with a diameter of 20 mm, through which you can pull the cables. The mast is hollow, so you pull the cables through the mast. On top of the mast there is a black impact cap that closes the mast. Your installer can drill a hole in the mast at the desired height through which the cable comes out and attach the camera to the mast. You pour the tilting anchor into (fast) concrete in the ground. Because each type of camera system has its own mounting brackets, we do not offer mounting brackets with this mast. Your installer or supplier of the cameras will be able to provide the correct mounting brackets for your cameras Price includes delivery in the Netherlands. We do not deliver these to the Wadden Islands. For deliveries outside the Netherlands, please contact us. This product is custom made especially for you and cannot be returned. Camera masts with a RAL color of your choice have a slightly longer delivery time of approximately 10 working days.
€1.929,00 - €2.029,00
-
AlarmsysteemExpert.nl Rejuvenated camera mast with tilting anchor and inspection hatch, 6 meters
Rejuvenated camera mast with tilting anchor and inspection hatch, 6 meters This reduced camera mast is 6 meters (available 5 - 6 meters). It is equipped with a tilting anchor and inspection hatch as standard. The base plate of the tilting anchor has a hole with a diameter of 50 mm, through which you can pull the cables. The mast is hollow, so you pull the cables through the mast. On top of the mast there is a black impact cap that closes the mast. Your installer can drill a hole in the mast at the desired height through which the cable comes out and attach the camera to the mast. You pour the tilting anchor into (fast) concrete in the ground. Because each type of camera system has its own mounting brackets, we do not offer mounting brackets with this mast. Your installer or supplier of the cameras will be able to provide the correct mounting brackets for your cameras Price includes delivery in the Netherlands. We do not deliver these to the Wadden Islands. For deliveries outside the Netherlands, please contact us. This product is custom made especially for you and cannot be returned. Camera masts with a RAL color of your choice have a slightly longer delivery time of approximately 10 working days.
€1.439,00 - €1.529,00
You have 48 of the 1848 products seen