Jablotron accessories

63 products

  • Jablotron Jablotron JB-110N Pro Bus PG power output module

    Jablotron JB-110N Pro Bus PG power output module

    In stock, delivery time 1 to 3 working days

    Jablotron JB-110N Pro Bus PG power output module The product is a system device for the Jablotron Midway Pro and Essex Pro. It provides a switching contact for the output power relay. For example, it can be used to control lighting, fans, etc. The relay communicates via the bus and is powered by the control panel bus. It can be installed in a JA-19xPL installation box or a control box.  

    In stock, delivery time 1 to 3 working days

    €82,53

  • Hikvision Hikvision Alarmkabel 8-aderig 2 x 0,75mm2 + 6x 0,22m2 rol 100 mtr, afgeschermd Hikvision Hikvision Alarmkabel 4-aderig 4 x 0,22mm rol 100 mtr, afgeschermd

    Hikvision Alarm Cable, 4-conductor, 4 x 0.22 mm, 100-meter roll, shielded

    In stock, delivery time 1 to 3 working days

    Hikvision DS-1AC4APL1/WHITE – 4-wire shielded alarm cable, 100 meters – White The Hikvision DS-1AC4APL1/WHITE is a high-quality, 100-meter, 4-conductor alarm cable, specially designed for reliable cabling of alarm systems and security installations. Thanks to its copper conductors, shielded construction, and flame-retardant LSZH jacket, this cable is ideal for both residential and professional security installations. Reliable Connection for Security Systems This alarm cable features four copper conductors, each with a cross-sectional area of 0.22 mm². The high-quality copper conductors ensure good electrical conductivity and reliable signal transmission. The cable is suitable for connecting various security components, such as motion detectors, magnetic contacts, smoke detectors, and other wired alarm sensors. Shielded and Fire-Resistant Design The DS-1AC4APL1/WHITE features shielding made of aluminum foil and Mylar tape. This shielding helps minimize electromagnetic interference and contributes to stable signal transmission. The white outer jacket is made of LSZH (Low Smoke Zero Halogen). This material limits smoke generation and the release of halogen-containing gases in the event of a fire. Additionally, the cable complies with the European CPR Eca fire classification. Key Features 4-conductor alarm cable: 4 x 0.22 mm² 100-meter cable length: suitable for a wide range of security systems Copper conductors: for reliable signal transmission Shielded design: helps reduce electromagnetic interference LSZH outer jacket: low smoke emission and halogen-free CPR Eca classification: complies with the European fire classification White version: suitable for neat and discreet installation Wide temperature range: suitable for temperatures from -20 °C to +70 °C Technical Specifications Property Specification Brand Hikvision Part Number DS-1AC4APL1/WHITE Product Type Shielded alarm cable Cable length 100 meters Number of conductors 4 Conductor cross-section 4 x 0.22 mm² Conductor material Copper Shielding Aluminum foil and Mylar Outer jacket LSZH Color White Outer diameter 3.9 mm (± 0.3 mm) Fire Rating CPR Eca Operating temperature -20 °C to +70 °C Compliance RoHS 2.0 Package Contents 1x Hikvision DS-1AC4APL1/WHITE alarm cable – 100 meters Why choose the Hikvision DS-1AC4APL1/WHITE? With the Hikvision DS-1AC4APL1/WHITE, you’re choosing a reliable and durable cabling solution for your alarm system. The combination of copper conductors, effective shielding, and an LSZH jacket makes this cable an excellent choice for a safe and professional installation.

    In stock, delivery time 1 to 3 working days

    €59,00

  • Hikvision Hikvision Alarmkabel 8-aderig 2 x 0,75mm2 + 6x 0,22m2 rol 100 mtr, afgeschermd Hikvision Hikvision Alarmkabel 8-aderig 2 x 0,75mm2 + 6x 0,22m2 rol 100 mtr, afgeschermd

    Hikvision Alarm Cable, 8-conductor, 2 x 0.75 mm² + 6 x 0.22 mm², 100-meter roll, shielded

    In stock, delivery time 1 to 3 working days

    Hikvision DS-1AC2C6APL1-WHITE – 8-conductor shielded alarm cable, 100 meters – White The Hikvision DS-1AC2C6APL1-WHITE is a high-quality, 8-conductor alarm cable measuring 100 meters, specially designed for reliable and professional security installations. Thanks to the combination of 6 conductors measuring 0.22 mm² and 2 conductors measuring 0.75 mm², this cable is ideal for connecting wired alarm systems, motion detectors, magnetic contacts, and other security components. The high-quality copper conductors, effective shielding, and flame-retardant LSZH outer jacket ensure reliable signal transmission and a safe installation. Reliable Signal Transmission and Power Supply The Hikvision DS-1AC2C6APL1-WHITE features eight copper conductors with different cross-sections. The six 0.22 mm² conductors are suitable for signal transmission, while the two thicker 0.75 mm² conductors are ideal for powering connected security equipment. Thanks to this combination, both power and signal cables can be routed through a single cable. This simplifies the installation and reduces the amount of cabling required. Shielded for Minimal Interference The alarm cable features shielding made of aluminum foil and Mylar tape, supplemented by a copper ground wire. This construction helps limit electromagnetic interference and contributes to a stable and reliable connection between the various security components. As a result, the cable is particularly well-suited for professional alarm systems where interference-free communication is critical. Fire-retardant LSZH outer jacket The white outer jacket is made of LSZH (Low Smoke Zero Halogen). This material limits smoke generation and the emission of harmful halogen-containing gases in the event of a fire. The cable complies with the European CPR Eca fire classification and is suitable for a wide range of indoor installations, depending on applicable installation regulations. Key Features 8-conductor alarm cable: 6 x 0.22 mm² + 2 x 0.75 mm² 100-meter cable length: ideal for residential and professional security installations 100% copper conductors: for reliable signal and power transmission Combined power and signal: two thicker wires for power and six wires for signals Shielded design: aluminum foil and Mylar tape help reduce electromagnetic interference LSZH outer jacket: halogen-free and low smoke emission in case of fire CPR Eca classification: European fire classification White cable jacket: for a neat and discreet finish Flexible construction: easy to work with during installation Wide temperature range: suitable for temperatures from -20 °C to +70 °C Technical Specifications Property Specification Brand Hikvision Part Number DS-1AC2C6APL1-WHITE Product Type Shielded alarm cable Cable length 100 meters Number of conductors 8 Conductor cross-section 6 x 0.22 mm² + 2 x 0.75 mm² Conductor material Copper (99.95%) Shielding Aluminum foil and Mylar tape Ground wire Copper Outer jacket LSZH Color White Outer diameter 5.2 mm (± 0.3 mm) Fire Rating CPR Eca Operating temperature -20 °C to +70 °C Compliance RoHS 2.0 Applications The Hikvision DS-1AC2C6APL1-WHITE is suitable for wiring various security systems and components, including: Wired alarm systems PIR motion detectors Magnetic contacts for doors and windows Smoke detectors and fire alarm components Glass break detectors Other wired security sensors Package Contents 1x Hikvision DS-1AC2C6APL1-WHITE shielded alarm cable – 100 meters Why choose the Hikvision DS-1AC2C6APL1-WHITE? With the Hikvision DS-1AC2C6APL1-WHITE, you’re choosing a reliable and versatile cabling solution for your security system. The combination of six signal wires, two thicker power wires, high-quality copper conductors, and a shielded LSZH jacket makes this cable particularly well-suited for a professional and organized installation. Whether you’re installing a new alarm system or expanding an existing security system, this 8-wire Hikvision alarm cable offers the quality and flexibility you need.

    In stock, delivery time 1 to 3 working days

    €119,00

  • Jablotron Jablotron Security Data Connector simcard

    Jablotron Security Data Connector SIM Card

    In stock, delivery time 1 to 3 working days

    Jablotron Security Data Connector SIM Card Key features: The card offers a flat-rate plan, meaning there is no data limit. This special SIM card is compatible with all Jablotron 100 systems, offers automatic recognition by the GSM dialer, and takes care of all your SIM card needs Fees can be paid monthly, quarterly, or annually. Payment is processed through MyJablotron and can therefore be made by the end user.

    In stock, delivery time 1 to 3 working days

    €3,90

  • Jablotron Jablotron JS-7902 curtain lens

    Jablotron JS-7902 curtain lens

    In stock, delivery time 1 to 3 working days

    Jablotron JS-7902 curtain lensThe JS-7902 curtain lens. This corridor lens has a length range of 10 meters. This lens is excellent for detecting moving heat sources in a focused beam (curtain) and can be placed in any Jablotron PIR.

    In stock, delivery time 1 to 3 working days

    €2,76

  • Jablotron Jablotron JS-7904 curtain lens

    Jablotron JS-7904 curtain lens

    In stock, delivery time 1 to 3 working days

    Jablotron JS-7904 curtain lensThe Jablotron JS-7904 curtain lens. This corridor lens has a length range of 25 meters. This lens is excellent for detecting moving heat sources in a focused beam (curtain) and can be placed in any Jablotron PIR.

    In stock, delivery time 1 to 3 working days

    €2,76

  • Jablotron Jablotron UR-01 Multifunctional relay

    Jablotron UR-01 Multifunctional relay

    In stock, delivery time 1 to 3 working days

    Jablotron UR-01 Multifunctional relay You can store the Jablotron UR-01 Multifunction Relay in your tool bag to help you solve many tasks.It is equipped with switching contacts with galvanic and safety isolation for switching a load of 230VAC/16A, which can be used in one of eight selectable modes. The relay is designed for mounting on a DIN rail and its characteristics are set using switches under a cover.It offers 8 functions:* Switching relay – Standard NO/NC relay* Bistable relay – for example for lighting control from multiple locations using buttons* Bistable relay with time limitation – for example to control lights from multiple places (however the light will not be on for longer than the set time)* Delayed shutdown - for example for fan run-off* Delayed start – starting an electric motor in star - delta mode.* Impulse through leading edge – activation of a device for a certain time* Impulse via rear flank – for example to switch on a fan after switching off the lights* Regular impulses – at a fixed interval this will activate a device for a period of 10 minutes - for example for the regular heating of a heating element in the bathroom

    In stock, delivery time 1 to 3 working days

    €130,92

  • Jablotron Jablotron JA-193PL-F-S-G, gray frame for mounting box BUS Designline PIR

    Jablotron JA-193PL-F-S-G, gray frame for mounting box BUS Designline PIR

    In stock, delivery time 1 to 3 working days

    Jablotron JA-193PL-F-S-G, gray frame for mounting box BUS Designline PIRJA-193PL-F-S-G, gray frame for mounting box BUS Designline PIR

    In stock, delivery time 1 to 3 working days

    €3,93

  • Jablotron Jablotron JA-110T BUS short circuit isolation module Jablotron Jablotron JA-110T BUS short circuit isolation module

    Jablotron JA-110T BUS short circuit isolation module

    In stock, delivery time 1 to 3 working days

    Jablotron JA-110T BUS short circuit isolation moduleThe Jablotron JA-110T BUS short circuit isolation module is designed to separate and protect unprotected parts of the BUS wiring. It is powered by the BUS from the control panel. It can be installed in a JA-190PL housing. It is not possible to assign it a zone (it does not occupy a position in the alarm system).Product Info

    In stock, delivery time 1 to 3 working days

    €62,10

  • Jablotron Jablotron JS-7910 pet lens

    Jablotron JS-7910 pet lens

    In stock, delivery time 1 to 3 working days

    Jablotron JS-7910 pet lensThe Jablotron JS-7910 Pet lens or pet lens is a lens that you can place in the PIRs of the Jablotron alarm system, with the exception of the JA-85P 360° PIR. The PET lens ensures that pets are not seen by the PIR up to a certain extent. Even small children are not seen by the PIR if a PET lens is placed in front of it. Adults are simply detected by the PIR with PET lens.

    In stock, delivery time 1 to 3 working days

    €2,76

  • Jablotron Jablotron JA-121T Converter module

    Jablotron JA-121T Converter module

    In stock, delivery time 1 to 3 working days

    Jablotron JA-121T Converter module The Jablotron JA-121T module is a universal converter to RS-485 for other systems. It synchronizes the transfer from the JABLOTRON 100 system bus to the RS-485 serial line and back.Used, for example, to connect to an intelligent home. Contains galvanic isolation circuits sized for a test voltage of 4 kV. The data is sent when the status changes or on request. In passive mode, all data is sent only on request. The module is addressable and occupies one position in the system.

    In stock, delivery time 1 to 3 working days

    €450,00

  • Jablotron Jablotron JA-116H BUS expander - 16 inputs Jablotron Jablotron JA-116H BUS expander - 16 inputs

    Jablotron JA-116H BUS expander - 16 inputs

    In stock, delivery time 1 to 3 working days

    Jablotron JA-116H BUS expander - 16 inputsThe Bus expander is an expansion module used to drive and connect up to 16 sensors  with contact outputs. This extension makes it possible to connect Jablotron and non-Jablotron related products such as infrared sensors, fire detectors or other detectors. This module can be installed directly in the control panel housing (JA-101K(R) and JA-106k(R).

    In stock, delivery time 1 to 3 working days

    €202,41

  • Jablotron Jablotron CC-01 Installation cable for the JA-100 system Jablotron Jablotron CC-01 Installation cable for the JA-100 system

    Jablotron CC-01 Installation cable for the JA-100 system

    In stock, delivery time 1 to 3 working days

    Jablotron CC-01 Installation cable for the JA-100 systemThe Jablotron CC-01 Installation cable for the JA-100 system is designed for easy installation. The colors of the cables are identical to the colors of the terminals. 300 meters of cable and each meter marked in black.• 1 x 2 x 24 AWG (0.5 mm) max. Conductor DC resistance 20 °C 97 O/km• 1 x 2 x 20 AWG (0.8 mm) max. Conductor DC resistance 20 °C 38 O/km

    In stock, delivery time 1 to 3 working days

    €299,00

  • Jablotron Jablotron JA-192PL-A Multifunctional installation box

    Jablotron JA-192PL-A Multifunctional installation box

    In stock, delivery time 1 to 3 working days

    Jablotron JA-192PL-A Multifunctional installation box The Jablotron JA-192PL-A Multifunctional installation box for outdoor use.Product Info

    In stock, delivery time 1 to 3 working days

    €17,33

  • Alarma Total Alarma Total Jablotron DE06-12 Power supply12V / 0.5A Alarma Total Alarma Total Jablotron DE06-12 Power supply12V / 0.5A

    Alarma Total Jablotron DE06-12 Power supply12V / 0.5A

    In stock, delivery time 1 to 3 working days

    Jablotron DE06-12 Power supply12V / 0.5A The Jablotron DE06-12 Power Supply12V / 0.5A is intended for powering wireless control panels and also for powering other 12V DC devices such as intercom outdoor stations, electric strike plate, IP and Analog 12volt cameras The compact dimensions of the housing allow the module to be placed in a standard electrical installation box for concealed installation under wall-mounted Jablotron products, such as the elements mentioned above. The screw holes for M3 screws are also useful for installation in typical fuse/switches where mounting is required.• supply voltage 100 ~ 240VAC, class protection II• output voltage 12V DC (± 2%)• output current 500 mA• peak output current T • output power 12W max.• protection against short circuit and overload• housing IP64• dimensions 50x48x25 mm• input cables length 110 mm (230 V), diameter 1.3 mm (16 AWG)• operating conditions according to EN 50131-1 II. environmental class• working temperature -10 ° C to +40 ° C• complies with EN 50130-4, EN 55022, EN 60950-1

    In stock, delivery time 1 to 3 working days

    €22,90

  • Jablotron Jablotron JA-111I Universal LED indicator RGB Jablotron Jablotron JA-111I Universal LED indicator RGB

    Jablotron JA-111I Universal LED indicator RGB

    In stock, delivery time 1 to 3 working days

    Jablotron JA-111I Universal LED indicator RGB The Jablotron JA-111I Universal LED indicator RGB indicates activation of a zone (SET) or of a PG output (1-32) by a multi-colored LED (red, green, blue and yellow). Product Info

    In stock, delivery time 1 to 3 working days

    €24,78

  • Jablotron Jablotron AWZ-300 Backup power source 3A

    Jablotron AWZ-300 Backup power source 3A

    In stock, delivery time 1 to 3 working days

    Jablotron AWZ-300 Backup power source 3AJablotron AWZ-300 Backup power source 3A• Power supply 230 V AC / 50 Hz • Output power 13.3-13.8 V DC• Transformer power 80 VA• Maximum permanent current 3A (with rechargeable battery)• Maximum output current 5A (peak, with rechargeable battery)• Electronic short-circuit protection• Current protection (overload) electronically• Transformer power consumption at rated load 0.38 A• Rechargeable battery capacity 17 Ah / 12 V• Dimensions 237 x 307 x 95 mm• Weight without battery  3.8kg

    In stock, delivery time 1 to 3 working days

    €148,71

  • Jablotron Jablotron JA-151N Wireless signal output module PG Jablotron Jablotron JA-151N Wireless signal output module PG

    Jablotron JA-151N Wireless signal output module PG

    In stock, delivery time 1 to 3 working days

    Jablotron JA-151N Wireless signal output module PGThe Jablotron JA-151N Wireless signal output module PG is a wireless PG power module (1 A/12/24 V DC required). It copies the status of a selected PG output of the JA-100 system (PG1 to PG32).A specific PG output can be selected via the printed circuit board with 5 DIP switches. This module does not occupy a position in the JA-100 system.• Power supply 12 - 24 V DC, not included as standard • Output relay load: max. 1 A/30 V DC• 1 PG output: 3 x terminals C, NC, NO• Environment according to EN 50131-1, EN 50131-3: II, internal• Operating temperature -10 to + 40 ° C 

    In stock, delivery time 1 to 3 working days

    €123,81

  • Jablotron Jablotron AC-160-C wireless multifunctional power relay, built-in model

    Jablotron AC-160-C wireless multifunctional power relay, built-in model

    In stock, delivery time 1 to 3 working days

    Jablotron AC-160-C wireless multifunctional power relay, built-in modelThe relay can also be installed as a standalone device, responding to the activation of, for example, unidirectional wireless detectors of the JA-15x series. In this case, the relay is activated according to the mode selected for the respective detector (choice of 5 modes: extended copy, impulse, status change, shutdown and blocking). It provides a switching contact relay with galvanic and safety isolation for switching a current load of 230V/16A. He occupies one position in the system. Nominal supply voltage 100-230 V, 50-60 HzInternal energy consumption at 230 V AC (min / max) 0.2 W / 0.7 WOperating frequency 868.1 MHz, Jablotron protocolAntenna internalContact load capacity – protection class II Max. switched voltage 250 V ACResistive load (cosφ=1) max. 16 A Inductive, capacitive load (cosφ=0.4) max. 8 AHalogen lighting max. 1000 W Minimum switching DC power supply 0.5 WDiameter of the connected conductors max. 2 x 1.5 mm2; max. 1 x 2.5 mm2Ingress protection class IP20Dimensions 49 x 49 x 26 mmOperating temperature range -10 °C - + 40 °C, RH 75% non-condensingIn accordance with ETSI EN 300 220-1, EN 50130-4, EN 55022, EN 60950-1Operating conditions ERC REC 70-03

    In stock, delivery time 1 to 3 working days

    €152,90

  • Jablotron Jablotron JA-118M BUS module for magnetic detectors - 8 inputs Jablotron Jablotron JA-118M BUS module for magnetic detectors - 8 inputs

    Jablotron JA-118M BUS module for magnetic detectors - 8 inputs

    In stock, delivery time 1 to 3 working days

    Jablotron JA-118M BUS module for magnetic detectors - 8 inputsThe Jablotron JA-118M BUS module for magnetic detectors - 8 inputs is specially designed for connecting magnetic detectors. Installation in a JA-190PL universal multifunction box is recommended (or in a universal box).• Power supply via BUS 12 V (9 ... 15 V)• Power consumption in standby 5 mA• Consumption for cable selection 15 mA• Dimensions 50 x 38 x 14 mm• Class 2 according to EN 50131-1, EN 50131-3• Operational environment according to EN 50131-1: II• Operating temperature -10 to +40 ° C• Also complies with EN 50130-4, EN 55022  

    In stock, delivery time 1 to 3 working days

    €128,11

  • Jablotron Jablotron JA-190PL Multifunctional installation housing Jablotron Jablotron JA-190PL Multifunctional installation housing

    Jablotron JA-190PL Multifunctional installation housing

    In stock, delivery time 1 to 3 working days

    Jablotron JA-190PL Multifunctional installation housingThe Jablotron JA-190PL Multifunctional installation housing can be used for various modules of the JA-100 system.Product Info

    In stock, delivery time 1 to 3 working days

    €5,37

  • Jablotron Jablotron JA-110I BUS section / output PG activation indicator Jablotron Jablotron JA-110I BUS section / output PG activation indicator

    Jablotron JA-110I BUS section / output PG activation indicator

    In stock, delivery time 1 to 3 working days

    Jablotron JA-110I BUS section / output PG activation indicatorThe Jablotron JA-110I BUS section / output PG activation indicator indicates activation of a zone (SET) or of a PG output (1-32) by a red LED.It is connected to the exchange by a BUS. It is not possible to assign him a zone. (it does not occupy a position in the alarm system.• LED ON power consumption: 5 mA• LED OFF power consumption: 2 mA 

    In stock, delivery time 1 to 3 working days

    €40,11

  • Jablotron Jablotron JA-110Z-C BUS connection module Jablotron Jablotron JA-110Z-C BUS connection module

    Jablotron JA-110Z-C BUS connection module

    In stock, delivery time 1 to 3 working days

    Jablotron JA-110Z-C BUS connection moduleThe Jablotron JA-110Z-C BUS connection module is designed to join BUS wires in the JA-100 system and can be installed in the JA-190PL housing.Product Info

    In stock, delivery time 1 to 3 working days

    €9,51

  • Jablotron Jablotron JA-190Y GSM dialer

    Jablotron JA-190Y GSM dialer

    In stock, delivery time 1 to 3 working days

    Jablotron JA-190Y GSM dialer The GSM communicator module is designed for the JA-100K and JA-100KR alarm control panels. It serves as a backup and extension of the LAN communicator, which is part of the control panel. When installed, it increases the reliability of data transfer to the JABLOTRON CLOUD and to the monitoring stationThe JA-190Y communicator makes it possible:– To operate the system via a voice menu– To report events directly to a mobile phone (SMS and voice messages) from the control panel

    In stock, delivery time 1 to 3 working days

    €408,71


You have 24 of the 63 products seen

Login

Forgot your password?

Don't have an account yet?
Create a free account and enjoy many benefits.