Hikvision 4 channel NVR with PoE
-
Hikvision HWN-4104MH-4P, 4 Channel 8Mp/4K NVR, 4x PoE
Attention! Hard disk is not included.Hikvision network recorder (NVR) that has 4 channels to connect IP cameras with an image quality of up to 4K (8 Megapixel). The NVR recorder has a built-in PoE switch, making it possible to supply power to the cameras directly via the network cable. The recorder has 1 HDMI input that allows you to display images of up to 4K on a monitor and 1 VGA input that allows you to stream images up to Full HD. The Hikvision NVR recorder supports a maximum resolution of 8 megapixels.Specifications: Video and Audio IP Video Input4 channels HDMI OutputHDMI: 1 channel, 4K (3840 × 2160)/30Hz, 1920 × 1080p/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz; HDMI/VGA simultaneous outputVGA: 1 channel, 1920 × 1080p/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz; HDMI/VGA simultaneous output VGA Output19201080/60Hz, 12801024/60Hz, 1280*720/60Hz Incoming Bandwidth40Mbps Outgoing Bandwidth80Mbps Audio Output1 channel, RCA (Linear, 1 KΩ) Two-Way Audio1 channel, RCA (2.0 Vp-p, 1 k Ω) Decode Decoding FormatH.265+, H.265, H.264+, H.264 Decoding capacity4 channels @ 1080p Synchronous Playback4 channels Recording Resolution8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF Network Network ProtocolTCP/IP, DHCP, Hik-Connect, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS Network interface1, RJ-45 10/100 Mbps self-adaptive Ethernet interface PoE Interface4 channels Current Power supply48 VDC, 1.35 A StandardIEEE 802.3 af/at RAID RAIDTypeNone Utility Interface SATA1 SATA interface CapacityUp to 8TB capacity per drive USB Interface2×USB 2.0 General Power consumption≤65W Consumption≤ 10W Working temperature-10 to +55º C (+14 to +131º F) Working humidity10 to 90% Housing1H Dimensions (W × D × H)265 × 225 × 48 mm (10.2" × 8.9" × 1.9") Weight≤ 1kg (2.2lb)
€229,00 €179,00
-
Hikvision DS-7604NXI-K1/4P (D) 4 Channel AcuSense 4K NVR HDMI and PoE
DS-7604NXI-K1/4P (D) 4 Channel AcuSense 4K NVR HDMI and PoE The Hikvision DS-7604NXI-K1/4P (D) Network Video Recorder is a 4 channel Acusense recorder with 4x PoE. Acusense is a technology that allows the recorder on all connected cameras to recognize and record people and/or vehicles. This reduces useless recordings, such as recordings of blowing leaves. The recorder is equipped with 4x PoE for plug and play connection of IP Cameras, an HDMI output for connecting a TV or Monitor, a network output for connection to the network/APP, a 1x SATA connection for a hard disk (not included as standard, select below) Hikvision AcuSense NVR 4-channel IP camera up to 12MP capable with 4 x PoE, classification of people and vehicles for motion detection (Acusense MD2.0) on 4 channels, fast target search and 1-channel facial recognition. (video stream) or 2-channel on facial recognition with photos. Specifications: Channels 4x PoE connections 4x PoE Video output HDMI, VGA Storage max. 1x 6TB Recording resolution max. 12MP 4K Audio in/out 1x in / 1x out Ethernet interface 1x RJ45 10/100/1000Mbps Alarm I/O n/a Streaming throughput 120 Mbps HDD Optional (not included) Voltage/Current 48Vdc /1.35A /10W USB 2x USB 2.0 Color Black Operating temperature -10 to 55°C Dimensions (hxwxd) 320 x 240 x 48mm Weight 1000 gr Brand Hikvision Data sheet
€299,00 €279,00
-
Hikvision DS-E04NI-Q1/4P, incl. 1 or 2TB SSD Suitable for 4 IP cameras 4x PoE
Hikvision DS-E04NI-Q1/4P, incl. 1 or 2TB SSD Suitable for 4 IP cameras 4x PoE Hikvision eSSD NVR is an updated look at what NVRs will look like. This recorder is particularly compact and energy efficient. The recorder is suitable for recording cameras up to 4MP. The views is maximum 1080p and has an outgoing bandwidth of 60Mbps. The eNVRs are available with PoE and without PoE Compact NVR with full functionality Due to its very compact size, the NVR can easily be placed anywhere. In the meter cupboard, TV cabinet or directly behind the monitor. Despite its compact size, the NVR functions just like other Hikvision recorders. Includes support for AcuSense detection. Energy efficient, stable and shock resistant This NVR is thanks to the use of an SSD hard drive. This drive consumes much less energy than traditional hard drives. An SSD is also less sensitive to vibrations and damage. Which also makes the NVR extremely suitable for mobile solutions or temporary camera masts. Completely silent Because the eSSD NVR does not have a fan. The SSD heats up less than a traditional drive. This means no additional cooling is required. An SSD drive is also quieter than a traditional hard drive. HDMI output and Decoding capacity for 4x 1080P or 2x 4MP, up to 60Mbps outgoing bandwidth The data processing capacity of an eSSD is currently somewhat lower than a traditional drive, so that the eSSD has a longer lifespan. To keep the NVR compact, it is also equipped with a slightly lighter GPU. As a result, the specifications for the display capacity of the local HDMI output are somewhat lower than other NVR Specifications: Video and audio IP Video Input - 4 Channels Incoming bandwidth - 40 Mbps Outgoing bandwidth - 60 Mbps HDMI output - 1920×1080/60Hz, 1600×1200/60Hz, 1280×1024/60Hz, 1280×720/60HzDecoding Decoding format - H.265,Smart265,H.264,Smart264 Recording resolution - 4MP/3MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF Synchronous Playback - 4 channels Decoding capabilities - 4ch@1080p (25fps) Stream type - video, video and audio Audio Compression - G.711ulaw/G.711alaw/G.722/G.726 Network Remote connection - 128 channels Network Protocol - TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS Network interface - 1 RJ-45 10/100 Mbps self-adaptive Ethernet interface PoE Interface - 4, RJ-45 10/100 Mbps self-adaptive Ethernet interface Power - ≤ 36 W Standard - IEEE 802.3 af/at Capacity 1TB SSD - (pre-installed) General Power supply - 48VDC, 1.04A Consumption - ≤ 10 W (with SSD) Operating temperature - -10°C to 45°C (14°F to 113°F) Operating humidity - 10 to 90% Dimensions - (W × D × H) 160 ×112 ×27 mm (6.3" × 4.4" × 1.1") Weight - ≤ 0.5 kg In the box DS-E04NI-Q1/4P Lan cable Mouse Manual
€449,00 €339,00
-
Hikvision DS-7604NI-K1/4P/4G 4 channels NVR with 4K HDMI 4G and PoE
DS-7604NI-K1/4P/4G 4 channels NVR with 4K HDMI 4G and PoE Are you looking for an NVR recorder but do you not have a direct connection to the internet? Then take a look at this new 4-channel Hikvision NVR recorder with a built-in 4G module. The Hikvision DS-7604NI-K1/4P/4G is equipped with all the conveniences of the AcuSense series, such as smart alarm filters. These filters ensure that when you receive recordings or notifications, they actually matter! With 4x PoE outputs you can connect up to 4 network cameras and supply them with power via the UTP cable. The NVR recorder has a built-in 4G module so that you can connect the recorder to the internet even in places where there is no direct network connection. To use the 4G network, a SIM card with data is required. The DS-7604NI-K1/4P/4G has an HDMI and a VGA connection for a monitor. The images from all cameras can be recorded on a hard drive (maximum 6TB), an HDD is not included as standard. Specifications: Motion detection 2.0 Human/vehicle analysis 4-ch Video and audio IP video input - 4 channels Incoming bandwidth - 40 Mbps Outgoing bandwidth - 80 Mbps HDMI output - 1 channel, 4K (4096 x 2160)/30 Hz, 4K (3840 x 2160)/30 Hz, 2K (2560 x 1440)/60 Hz, 1920 x 1080/60 Hz, 1600 x 1200/60 Hz, 1280 x 1024/60 Hz, 1280 x 720/60 Hz VGA output - 1 channel, 1920 × 1080/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz Video output mode HDMI/VGA output Audio output - 1 channel, RCA (linear, 1 KΩ) Two-way audio - 1 channel, RCA (2.0 Vp-p, 1 KΩ) Decoding Decoding format - H.265+/H.265/H.264+/H.264 Recording resolution - 8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF Playback - 4 channel Decoding capabilities - 1-channel at 8 MP (30 fps) / 3-channel at 4 MP (30 fps) / 6-channel at 1080p (30 fps) Stream type - video, video and audio Audio Compression - G.711ulaw,G.711alaw,G.722,G.726,AAC,MP2L2 Network Network interface - 1 RJ-45 10/100 Mbps self-adaptive Ethernet interface Network Protocol - TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS Remote connection - 32 PoE Interface 4, RJ-45 10/100 Mbps self-adaptive Ethernet interface Power - ≤ 50 W Standard - IEEE 802.3 af/at Wireless parameter SIM/UIM card slot 1 micro SIM card slot, on back panel SMA antenna interface - 1 4G interface, antenna module cable length: 3 m 1 ANT interface for GPS antenna (GPS antenna is optional) Wireless standard - GSM/EDGE: 850/900/1800 MHz WCDMA: B1/B5/B8 LTE FDD: B1/B3/B5/B7/B8/B20/B28 LTE TDD: B38/B40/B41 Interface SATA - 1 SATA interface Capacity - Up to 8 TB capacity for each drive USB interface - Front panel: 1 × USB 2.0; Back panel: 1 × USB 2.0 General Power supply - 48 VDC, 1.875 A Consumption ≤ 10 W (without HDD and PoE off) Operating temperature - -10°C to 55°C (14°F to 131°F) Operating Humidity - 10% to 90% Dimensions - (W × D × H) 320 × 240 × 48 mm (12.4" × 9.4" × 1.9") Weight ≤ 1.18 kg (without HDD, 2.6 lb.)
€449,00 €399,00
-
Hikvision DS-7604NXI-K1/4P/VPRO, 4-Channel AI, AcuSeek 4K NVR with HDMI and PoE
The Hikvision DS-7604NXI-K1/4P/VPRO is an advanced 4-channel network video recorder (NVR) from the VPro series, designed for professional security installations where smart analytics and reliability are key. Thanks to integrated AI capabilities and Power-over-Ethernet (PoE), this recorder is ideal for both small and medium-sized surveillance systems. Smart Security with AI This NVR utilizes Hikvision’s AcuSense technology, which accurately recognizes people and vehicles. This significantly reduces false alarms caused by factors such as moving leaves or animals. Features such as facial recognition, perimeter security, and intelligent motion detection ensure efficient and targeted surveillance. With AcuSearch and AcuSeek, you can quickly search for specific events or people in recorded footage, which significantly reduces search time. Plug & Play Installation The DS-7604NXI-K1/4P/VPRO features 4 built-in PoE ports, allowing IP cameras to be connected directly without additional switches or power supplies. This makes installation simple and straightforward. Powerful performance Support for up to 4 IP cameras with resolutions up to 12MP H.265+/H.265 video compression for efficient storage Up to 40 Mbps incoming bandwidth 4K HDMI output for crystal-clear display Supports 1 SATA hard drive up to 16TB Flexible and future-proof The recorder supports various network protocols and can be easily accessed remotely via a PC or mobile app. Thanks to its high decoding capacity and smart analytics capabilities, this system is ready to meet modern security requirements. Key Benefits AI-driven detection of people and vehicles Fewer false alarms thanks to intelligent analysis Easy installation with 4x PoE Compatible with high-resolution cameras up to 12MP Fast search functions in recordings (AcuSearch/AcuSeek) Specifications: Video & Recording Number of channels: 4 IP cameras Maximum resolution: up to 12 MP Video compression: H.265+, H.265, H.264+, H.264 Inbound bandwidth: 40 Mbps Outgoing bandwidth: 80 Mbps Recording resolutions: 12 MP / 8 MP / 6 MP / 5 MP / 4 MP / 3 MP / 1080p and lower Simultaneous playback (live view): 1 / 2 / 4 channels Synchronous playback: 4 channels AI & intelligent features AcuSense technology (human and vehicle detection) Face recognition (up to 50,000 faces in the database) Perimeter security (line crossing / intrusion detection) Motion Detection 2.0 (intelligent motion detection) AcuSearch & AcuSeek (smart search in recordings) Support for ANPR and VCA via cameras Decoding & Performance Decoding capacity: AI on: up to 12 channels @ 1080p AI off: up to 24 channels @ 1080p Synchronous playback: 4-ch Support for video + audio streams Video outputs HDMI: up to 4K (3840 × 2160) @ 30Hz VGA: up to 1080p Independent HDMI/VGA output Audio 1x audio input (RCA, two-way audio) 1x audio output (RCA) Audio compression: G.711, G.722, G.726, AAC, MP2L2 Network 1x RJ-45 Gigabit Ethernet (10/100/1000 Mbps) Up to 128 remote users Supported protocols: TCP/IP, DHCP, IPv4/IPv6, RTSP, HTTPS, ONVIF, and others PoE (Power over Ethernet) 4x PoE ports (RJ-45) Standard: IEEE 802.3af/at Max. PoE power: ≤ 50W Plug & Play camera connection Storage & Connections 1x SATA port Max. storage capacity: up to 16 TB USB: 2x USB 2.0 (front + rear) Alarm in/out: 4 / 1 General Power supply: 48 VDC, 1.35 A Power consumption: ≤ 10W (without HDD) Operating temperature: -10°C to +55°C Dimensions: 319 × 240 × 48 mm Weight: ± 1 kg (without HDD)
€459,00 €399,00