Hikvision 8 channel NVR with PoE

Attention! Hard disk is not included.Hikvision network recorder (NVR) that has 8 channels to connect IP cameras with an image quality of up to 4K (8 Megapixel). The NVR recorder has a built-in PoE switch, making it possible to supply power to the cameras directly via the network cable. The recorder has 1 HDMI input that allows you to display images of up to 4K on a monitor and 1 VGA input that allows you to stream images up to Full HD. The Hikvision NVR recorder supports a maximum resolution of 8 megapixels.Specifications: Motion detection 2.0 Human/Vehicle Analysis 4 channels Video and Audio IP Video Input 8 channels Incoming Bandwidth 80 Mbps Outgoing Bandwidth 80 Mbps HDMI output 1 channel, 4K (4096 x 2160)/30 Hz, 4K (3840 x 2160)/30 Hz, 2K (2560 x 1440)/60 Hz, 1920 x 1080/60 Hz, 1600 x 1200/60 Hz, 1280 x 1024/60 Hz, 1280x720/60Hz VGA output 1 channel, 1920 × 1080/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz Video output mode HDMI/VGA simultaneous output Audio output 1 channel, RCA (Linear, 1 KΩ) Two-way audio 1 channel, RCA (2.0 Vp-p, 1kΩ) Decoding Decoding format H.265+/H.265/H.264+/H.264 Recording resolution 8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF Synchronous playback 8 channels Decoding Capacity 1ch@8MP (30fps)/3ch@4MP (30fps)/6ch@1080p (30fps) Stream type Video, Video & Audio Audio compression G.711ulaw/G.711alaw/G.722/G.726 Network External connection 32 Network Protocol: TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS Network interface 1 RJ-45 10/100 Mbps self-adaptive Ethernet interface PoE Interface 8-channel, RJ-45 10/100 Mbps self-adaptive Ethernet interface Power ≤ 75 W Standard IEEE 802.3 af/at Auxiliary connections SATA 1 SATA interface Capacity Up to 8 TB capacity per drive USB interface 2 × USB 2.0 Alarm In/Out N/A General Supply voltage 48 VDC, 1.88 A Consumption ≤ 10 W (without HDD and PoE disabled) Operating temperature -10°C to 55°C (14°F to 131°F) Working humidity 10% to 90% Dimensions (W × D × H) 265 × 225 × 48 mm (10.2" × 8.9" × 1.9") Weight ≤ 1 kg (without HDD, 2.2 lb.) Certification FCC Part 15 Subpart B, ANSI C63.4-2014 CE EN 55032: 2015, EN 61000-3-2, EN 61000-3-3, EN 50130-4, EN 55035: 2017

Read more less

DS-7608NXI-K1/8P 8 channels 4K NVR HDMI and PoE The Hikvision DS-7608NXI-K1/8P  Network Video Recorder is an 8 channel Acusense recorder with 8x PoE inputs. Acusense is a technology that allows the recorder on all connected cameras to recognize and record people and/or vehicles. This reduces useless recordings, such as recordings of blowing leaves. The recorder is equipped with 8x PoE for plug and play connection of IP Cameras, an HDMI output for connecting a TV or Monitor, a network output for connection to the network/APP, 1x SATA connection for a hard disk (not included as standard, select below) Hikvision AcuSense NVR 8-channel IP camera up to 12MP 4K with 8 x PoE, classification of people and vehicles for motion detection (MD2.0) on 8 channels, fast target search and 1-channel facial recognition. (video stream) or 4-channel on facial recognition with photos. Specifications: Intelligent analytics AI per device - Facial recognition, perimeter security, motion detection 2.0 AI via camera - Face recognition, perimeter security, motion detection2.0, ANPR, VCA Motion detection 2.0 Per device - All channels, 4 MP (when enhanced SVC mode is enabled, up to 8 MP) video analytics for people and vehicle recognition  Per camera - All channels Perimeter protection Per device 2-channel, 4 MP (HD network camera, H.264/H.265) video analytics for human and vehicle recognition to reduce false alarms Per camera - All channels Video and audio IP video input - 8 channels Incoming bandwidth - 80 Mbps Outgoing bandwidth - 160 Mbps HDMI output - 1 channel, 4K (3840 × 2160)/30 Hz, 2K (2560 × 1440)/60 Hz, 1920 × 1080/60 Hz, 1600 × 1200/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz, 1024 × 768/60 Hz VGA output - 1 channel, 1920 × 1080/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz Video output mode - HDMI/VGA independent output CVBS output N/A Audio output - 1 channel, RCA (2.0 Vp-p, 1 KΩ, using the audio in) Two-way audio - 1 channel, RCA (linear, 1 KΩ) Decoding Decoding format H.265/H.265+/H.264+/H.264 Recording resolution 12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF Playback - 8 channelsDecoding capabilities - AI on: 1-ch@12 MP (30 fps)/2-ch@8 MP (30 fps)/4-ch@4 MP (30 fps)/8-ch@1080p (30fps)AI off: 2-ch@12 MP (30 fps)/3-ch@8 MP (30 fps)/6-ch@4 MP (30 fps)/12-ch@1080p (30fps) Stream type - video, video and audio Audio Compression - G.711ulaw/G.711alaw/G.722/G.726/AAC Network Remote connection - 128 API - ONVIF (profile S/G); SDK; ISAPI Compatible browser- IE11, Chrome V57, Firefox V52, Safari V12, Edge V89 or higher Network Protocol - TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS Network Interface - 1 RJ-45 10/100/1000 Mbps Self-adaptive Ethernet InterfacePoE Interface - 8, RJ-45 10/100 Mbps self-adaptive Ethernet interface Power - ≤ 80 W Standard - IEEE 802.3af/at Interface SATA - 1 SATA interface Capacity - Maximum 10 TB  USB interface -Front panel: 1 × USB 2.0; Back panel: 1 × USB 2.0  

Read more less

DS-7608NXI-K2/8P 8 channels 4K NVR HDMI and PoE The Hikvision DS-7608NXI-K2/8P Network Video Recorder is an 8 channel Acusense recorder with 8x PoE inputs. Acusense is a technology that allows the recorder on all connected cameras to recognize and record people and/or vehicles. This reduces useless recordings, such as recordings of blowing leaves. The recorder is equipped with 8x PoE for plug and play connection of IP Cameras, an HDMI output for connecting a TV or Monitor, a network output for connection to the network/APP, 2x SATA connection for a hard disk (not included as standard, select below) Hikvision AcuSense NVR 8-channel IP camera up to 12MP 4K with 8 x PoE, classification of people and vehicles for motion detection (MD2.0) on 8 channels, fast target search and 1-channel facial recognition. (video stream) or 4-channel on facial recognition with photos. Specifications: Intelligent analytics AI per device - Facial recognition, perimeter security, motion detection 2.0 AI via camera - Face recognition, perimeter security, motion detection2.0, ANPR, VCA Motion detection 2.0 Per device - All channels, 4 MP (when enhanced SVC mode is enabled, up to 8 MP) video analytics for people and vehicle recognition to reduce false alarms Per camera - All channels Perimeter protection Per device 2-channel, 4 MP (HD network camera, H.264/H.265) video analytics for human and vehicle recognition to reduce false alarms Per camera - All channels Video and audio IP video input - 8 channels Incoming bandwidth - 80 Mbps Outgoing bandwidth - 160 Mbps HDMI output - 1 channel, 4K (3840 × 2160)/30 Hz, 2K (2560 × 1440)/60 Hz, 1920 × 1080/60 Hz, 1600 × 1200/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz, 1024 × 768/60 Hz VGA output - 1 channel, 1920 × 1080/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz Video output mode - HDMI/VGA independent output CVBS output N/A Audio output - 1 channel, RCA (2.0 Vp-p, 1 KΩ, using the audio in) Two-way audio - 1 channel, RCA (linear, 1 KΩ) Decoding Decoding format H.265/H.265+/H.264+/H.264 Recording resolution 12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF Playback - 8 channelsDecoding capabilities - AI on: 1-ch@12 MP (30 fps)/2-ch@8 MP (30 fps)/4-ch@4 MP (30 fps)/8-ch@1080p (30fps)AI off: 2-ch@12 MP (30 fps)/3-ch@8 MP (30 fps)/6-ch@4 MP (30 fps)/12-ch@1080p (30fps) Stream type - video, video and audio Audio Compression - G.711ulaw/G.711alaw/G.722/G.726/AAC Network Remote connection - 128 API - ONVIF (profile S/G); SDK; ISAPI Compatible browser- IE11, Chrome V57, Firefox V52, Safari V12, Edge V89 or higher Network Protocol - TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS Network Interface - 1 RJ-45 10/100/1000 Mbps Self-adaptive Ethernet InterfacePoE Interface - 8, RJ-45 10/100 Mbps self-adaptive Ethernet interface Power - ≤ 80 W Standard - IEEE 802.3af/at Interface SATA - 2 SATA interfaces Capacity - Up to 10 TB capacity for each HDD USB interface -Front panel: 1 × USB 2.0; Back panel: 1 × USB 2.0 Alarm in/out - 4/1  

Read more less

This Hikvision DS-7608NXI-I2/8P Acusense NVR 8-channel with 8 x PoE recorder contains AcuSense artificial intelligence technology that significantly improves the quality of alerts thanks to its deep learning functions. This technology significantly reduces the number of false alarms caused by branches moving in the wind, animals, light changes, shadows, etc. The Pro Series' AcuSense technology with Acusense is capable of identifying a human or a vehicle among a very large number of objects in a scene. This significantly reduces the number of false alarms. This Hikvision DS-7608NXI-I2/8P Acusense NVR 8-channel with 8 port PoE recorder can also manage cameras that are not AcuSense to let them take advantage of this feature. It can support up to 4 non-AcuSense cameras. These cameras then benefit from advanced warning functions with AcuSense technology. This very powerful Hikvision DS-7608NXI-I2/8P Acusense NVR 8-channel with 8 x PoE recorder allows the connection of up to 8 4K IP cameras or lower resolutions. The cameras can be connected directly to the PoE ports of this Hikvision. The exclusive Acusense technology significantly reduces false alarms. This technology, on the one hand, makes it possible to detect intruders corresponding to people and/or vehicles and, on the other hand, can also filter out false alarms that would be triggered by non-threatening moving objects such as animals, changes in light, rain, leaves moving in the wind, etc. The system then focuses on the movement of people and/or vehicles, significantly reducing the number of false alarms for faster and, above all, more accurate detection of intrusions of more than 98%. The technology also offers a very powerful and fast target search function, capable of analyzing the recordings and extracting any images of people or vehicles associated with the corresponding video sequence. Specifications: Facial recognitionFace Detection & Analysis - Face Photo Comparison, Human Face Capture, Face Photo Search. Face Photo Library - Up to 16 facial photo libraries, with a total of up to 10,000 facial photos (each photo ≤ 512 KB, total capacity ≤ 150 MB) Face Photo Comparison - 4 Channel Face Image Comparison Alarm Face detection and analysis performance - 1-channel human face capture (HD Network Camera, up to 8 MP, H.264/H.265)Motion detection 2.0 Human/Vehicle Analysis - 8 Channelperimeter protection Human/Vehicle Analytics -Up to 4-channel 2 MP (H.264/H.265) video analytics for human and vehicle recognition to reduce false alarms; Maximum 12 lines in totalVideo and audio IP Video Input - 8 Channel Up to 12 MP resolution Incoming bandwidth - 80 Mbps Outgoing bandwidth - 256 Mbps HDMI output - 4K (3840 × 2160)/60 Hz, 4K (3840 × 2160)/30 Hz, 2K (2560 × 1440)/60 Hz, 1920 × 1080/60 Hz, 1600 × 1200/60 Hz, 1280 × 1024/60Hz, 1280×720/60Hz, 1024×768/60Hz VGA output - 1 channel, 1920 × 1080/60 Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz, Video output mode - HDMI/VGA independent output CVBS output - 1 channel, BNC (1.0 Vp-p, 75 Ω), resolution: PAL: 704 × 576, NTSC: 704 × 480 Audio output - 1 channel, RCA (linear, 1 KΩ) Two-way audio input - 1 channel, RCA (2.0 Vp-p, 1 KΩ)Decoding Decoding format - H.265+/H.265/H. 264+/H.264/MPEG4 Recording resolution - 12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF Synchronous playback  – 8 channels Capability - 16ch@1080p (30fps) Dual stream recording - Support Stream type Video, Video and audio Audio Compression - G.711ulaw/G.711alaw/G.722/G.726/MP2L2Network External connections - 128 Network Protocol - TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS Network Interface - 1, RJ-45 10/100/1000 Mbps Self-adaptive Ethernet InterfacePoE Interface - 8, RJ-45 10/100 Mbps self-adaptive Ethernet interface Power supply - ≤ 120 W Supported standard - IEEE 802.3 af/atAdditional interface SATA - 2 SATA interfaces Capacity - Up to 10 TB capacity for each drive Alarm in/out - 4/1 USB interface - Front panel: 1 × USB 2.0; Back panel: 1 × USB 3.0General Power - 100 to 240 VAC, 50 to 60 Hz Consumption - (without HDD) ≤ 15 W Operating temperature - -10°C to 55°C (14°F to 131°F) Operating Humidity - 10% to 90% Chassis - 1U chassis Dimensions - (W × D × H) 385 × 315 × 52 mm (15.2" × 12.4" × 2.0") Weight - (without HDD) ≤ 2.7 kg (6.0 lb) Certification - FCC - CE 

Read more less

Hikvision DS-E08NI-Q1/8P, Incl. 2TB SSD, Suitable for 8 IP cameras 8x PoE Hikvision eSSD NVR is an updated look at what NVRs will look like. This recorder is particularly compact and energy efficient. The recorder is suitable for recording cameras up to 4MP. The views is maximum 1080p and has an outgoing bandwidth of 60Mbps. The eNVRs are available with PoE and without PoE Compact NVR with full functionality Due to its very compact size, the NVR can be easily placed anywhere. In the meter cupboard, TV cabinet or directly behind the monitor. Despite its compact size, the NVR functions just like other recorders from Hikvision. Includes support for AcuSense detection Energy efficient, stable and shock resistant  This NVR is thanks to the use of an SSD hard drive. This drive consumes much less energy than traditional hard drives. An SSD is also less sensitive to vibrations and damage. Which also makes the NVR extremely suitable for mobile solutions or temporary camera masts Completely silent Because the eSSD NVR does not have a fan. The SSD heats up less than a traditional drive. This means no additional cooling is required. An SSD drive is also quieter than a traditional hard drive  Environmentally friendly The eSSD consumes approximately 44% energy compared to an equal NVR with a traditional hard drive. Due to its compact size, the recorder also takes up less space and weight during transport and the packaging in which the NVR comes is completely biodegradable Available with PoE ports for Plug & Play operation.  The eSSD NVR is available with and without PoE ports. The models with PoE ports are suitable for plug & play with Hikvision cameras HDMI output and Decoding capacity for 4x 1080P or 2x 4MP, up to 60Mbps outgoing bandwidth.  The data processing capacity of an eSSD is currently somewhat lower than a traditional drive, so that the eSSD has a longer lifespan. To keep the NVR compact, it is also equipped with a slightly lighter GPU. As a result, the specifications for the display capacity of the local HDMI output are somewhat lower than other NVR Specifications: Video and audio IP video input - 8 channels Incoming bandwidth - 60 Mbps Outgoing bandwidth - 60 Mbps HDMI output - 1920×1080/60Hz, 1600×1200/60Hz, 1280×1024/60Hz, 1280×720/60Hz Decoding Decoding format - H.265,Smart265,H.264,Smart264 Recording resolution - 4MP/3MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF Synchronous playback - 4 channels Decoding capabilities - 4ch@1080p (25fps) Stream type - video, video and audio Audio Compression - G.711ulaw/G.711alaw/G.722/G.726 Network External connection 128-ch Network Protocol - TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS Network interface - 1 RJ-45 10/100 Mbps self-adaptive Ethernet interface PoE Interface - 8, RJ-45 10/100 Mbps self-adaptive Ethernet interface Power - ≤ 58 W Standard - IEEE 802.3 af/at Interface Capacity - 2TB SSD (pre-installed) USB interface - Back panel: 2 × USB 2.0 General Power supply - 48VDC, 1.36A Consumption - ≤ 10 W (with SSD) Operating temperature - -10°C to 50°C (14°F to 122°F) Operating humidity - 10 to 90% Dimensions - (W × D × H) 225 ×122 ×27 mm (8.9" × 4.8" × 1.1") Weight - ≤ 0.5 kg Certification - CE EN 55032: 2015, EN 61000-3-2, EN 61000-3-3, EN 50130-4, EN 55035: 2017In the box DS-E08NI-Q1/8P 2TB Nutrition Mouse Lan cable Manual

Read more less

DS-7608NI-K2/8P/4G 8 channels NVR 4K with HDMI 4G and PoE The DS-7608NI-K2/8P/4G (NVR) is a new generation recorder, combined with multiple advanced technologies such as audio and video decoding, embedded system technology, storage technology, network technology and intelligent technology.The NVR can work as a recorder as well as collaborate with other devices to form a comprehensive surveillance system.This NVR is a Plug & Play recorder and it can record a resolution of up to 8 Megapixels 4K. The HDMI can display an image resolution of up to 4K. You can connect the cameras directly to the recorder.You can also connect cameras to the NVR if they are connected elsewhere in the network. For example, by means of a switch.Internally you have a SATA connection for 2 hard drives up to 6 TB.Of course you can also access this recorder via the Hik-connect app or in your web browser. Specifications: Motion detection 2.0 Human/vehicle analysis - 4-ch Video and audio IP video input - 8 ch Incoming bandwidth - 80 Mbps Outgoing bandwidth - 80 Mbps HDMI output - 1 channel, 4K (4096 x 2160)/30 Hz, 4K (3840 x 2160)/30 Hz, 2K (2560 x 1440)/60 Hz, 1920 x 1080/60 Hz, 1600 x 1200/60 Hz, 1280 x 1024/60 Hz, 1280 x 720/60 Hz VGA output - 1 channel, 1920 × 1080/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz Video output mode - Simultaneous HDMI/VGA output Audio output - 1 channel, RCA (linear, 1 KΩ) Two-way audio - 1 channel, RCA (2.0 Vp-p, 1 KΩ) Decoding Decoding format H.265+/H.265/H.264+/H.264 Recording resolution - 8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA/4CIF/DCIF/2CIF/CIF/QCIF Synchronous playback 8-ch Decoding capabilities - 1-channel at 8 MP (30 fps) / 3-channel at 4 MP (30 fps) / 6-channel at 1080p (30 fps) Stream type - video, video and audio Audio Compression - G.711ulaw,G.711alaw,G.722,G.726,AAC,MP2L2 Network Network interface - 1 RJ-45 10/100 Mbps self-adaptive Ethernet interface Network Protocol - TCP/IP, DHCP, IPv4, IPv6, DNS, DDNS, NTP, RTSP, SADP, SMTP, SNMP, NFS, iSCSI, ISUP, UPnP™, HTTP, HTTPS Remote connection - 32 PoE Interface - 8, RJ-45 10/100 Mbps self-adaptive Ethernet interface Power - ≤ 80 W Standard - IEEE 802.3 af/at Wireless parameter SIM/UIM card slot - 1 micro SIM card slot, on back panel SMA antenna interface - 1 4G interface, antenna module cable length: 3 m 1 ANT interface for GPS antenna (GPS antenna is optional) Wireless standard -GSM/EDGE: 850/900/1800 MHz WCDMA: B1/B5/B8 LTE FDD: B1/B3/B5/B7/B8/B20/B28 LTE TDD: B38/B40/B41 Interface SATA - 2 SATA interfaces Capacity - Up to 8 TB capacity for each drive USB interface - Front panel: 1 × USB 2.0; Back panel: 1 × USB 2.0 General Power supply - 48 VDC, 2.5 A Consumption - ≤ 15 W (without HDD and PoE off) Operating temperature - -10°C to 55°C (14°F to 131°F) Operating Humidity - 10% to 90% Dimensions - (W × D × H) 385 × 315 × 52 mm (15.2" × 12.4" × 2.0") Weight - ≤ 3 kg (without HDD, 6.6 lb.)

Read more less