Hikvision outposts and modular components

The DS-KD-K12 with 12 buttons module is intended for cooperation with the DS-KD8003-IME1 video intercom module. The modules of the DS-KD-xx series are mounted in special housings of the DS-KD-ACF (recessed housings) and DS-KD-ACW (surface-mounting housings) series. Aluminum masking frames are supplied with the housings from both series.Product info

Read more less

HikVision Blank module for video intercom Blank module, 98.21mmx100.21mm x33.7mm Product info  

Read more less

The DS-KD-KK module is intended for cooperation with the DS-KD8003-IME1 video intercom module. The modules of the DS-KD-xx series are mounted in special housings of the DS-KD-ACF (recessed housings) and DS-KD-ACW (surface-mounting housings) series. Aluminum masking frames are supplied with the housings from both series.Product info

Read more less

The DS-KD-M module is designed to work with the DS-KD8003-IME1 video intercom module.The modules of the DS-KD-xx series are mounted in special boxes of the DS-KD-ACF (integrated boxes) and DS-KD-ACW (surface-mounted boxes) series. The aluminum masking frames are supplied with the boxes of the two series.Product info

Read more less

The DS-KD-IN module is intended for cooperation with the DS-KD8003-IME1 video intercom module. The device is used for visual signaling of the status of the voice connection of the video intercom to the indoor panel and the opening status of the gate.The modules of the DS-KD-xx series are mounted in special housings of the DS-KD-ACF (recessed housings) and DS-KD-ACW (surface-mounting housings) series. Aluminum masking frames are supplied with the housings from both series.Product info

Read more less

The DS-KD-KP module is intended for cooperation with the DS-KD8003-IME1 video intercom module.The modules of the DS-KD-xx series are mounted in special housings of the DS-KD-ACF (recessed housings) and DS-KD-ACW (surface-mounting housings) series. Aluminum masking frames are supplied with the housings from both series.Product info

Read more less

The Hikvision DS-KD-DIS module is designed to work with the DS-KD8003-IME1 or DS-KD8003-IME2 video intercom outpost. With this handy and professional display module, which contains a 3.5-inch LCD screen, an indoor station can be called from the contact list shown on the display.Product info

Read more less

Hikvision's video intercom products are suitable for various applications, including homes and apartments. Since the IP networks transfer a larger amount of data, higher video quality can be achieved. The IP series products can be integrated into CCTV systems and have additional features such as management via a mobile app. Hikvision Intercom systems can be expanded from 1 outdoor station and 1 indoor station to 16 outdoor stations and 500 indoor stations. Each main indoor station can be expanded with 5 indoor station extensions. 2-wire can also be combined with IP (PoE) without any problems. This outdoor post must be linked to an indoor post.All Y-generation Hikvision intercom products can be combined with each other. For 2nd generation 2-wire intercom products, this is only possible via the IP network. IP and 2-wire products can be used together. Specifications: Operation System - Embedded Linux operating system ROM - 32MB RAM - 256MB Processor - Embedded ProcessorVideo Parameters Lens - 1 Resolution - 2 MP FOVHorizontal: 146°, Vertical: 82° Wide Dynamic Range - (WDR)Support Supplement Light - IR light, up to 3 m Video Compression Standard - H.264Audio Parameters Audio Input - 1 built-in omnidirectional microphone Audio Compression Standard - G.711 U, G.711 A Audio Output - 1 built-in loudspeaker Audio Compression Bitrate - 64Kbps Audio Quality - Noise suppression and echo cancellation Volume Adjustment - AdjustableCapacity User Capacity - 2000 Face Capacity - AFTER Linked Indoor Station Capacity - 500 Sub Door Station Capacity - 16Device Interfaces Alarm Input - 4 (2 exit buttons and 2 door contacts by default) TAMPER - 1 Exit Button - 2 (2 for lock control) RS-485 - 1 (1 for Hikvision's sub module communication) Lock Control - 2 relays, Max. to 30 VDC, 2 A By Contact Input - 2 Two-Wire IP Interface - 1General Button - 1 Installation - Surface mounting, flush mounting Weight -- Net weight: 0.380 kg- Gross weight: 0.541 kg Protective Level - IP65 Working Temperature - -40° C to 60° C (-22° F to 140° F) Working Humidity - 10% to 90% Dimension (W × H × D)100mm × 98mm × 42mm Power Supply - Powered by KAD704Y or KAD706Y series distributor Application Environment - Outdoor Power Consumption - ≤ 4W  

Read more less

The DS-KD-KP module is intended for cooperation with the DS-KD8003-IME1 video intercom module. The modules of the DS-KD-xx series are mounted in special housings of the DS-KD-ACF (recessed housings) and DS-KD-ACW (surface-mounting housings) series. Aluminum masking frames are supplied with the housings from both series.

Read more less

HikVision Video Intercom module, Sub-module fingerprint and card reader M1, Desfire card, powered via the main module, mounting accessories not included. Can be installed with accessories (not included) in or surface-mounted, power supply via main module, RS485 communication, IP65Specifications: Capacity Fingerprint capacity - 1000 Card capacity - 6000Authentication Card reading frequency - 13.56 MHz Card reading distance - 2 cm Card type M1, Desfire cardDevice interfaces DIP switch - 8 bits RS-485 - 1General Installation - Flush mounting, surface mounting Protective level - IP65 Working temperature - -30 °C to 60 °C Working humidity - 10% to 90% (no-condensing) Dimension  - (W × H × D) 100 mm × 100 mm × 35 mm (3.94" × 3.94" × 1.38") Power supply - 12 VDC, supplied by the main module Power consumption - ≤ 4 W

Read more less