Hikvision Outposts and modules

The DS-KD-K12 with 12 buttons module is intended for cooperation with the DS-KD8003-IME1 video intercom module. The modules of the DS-KD-xx series are mounted in special housings of the DS-KD-ACF (recessed housings) and DS-KD-ACW (surface-mounting housings) series. Aluminum masking frames are supplied with the housings from both series.Product info

Read more less

The DS-KD-K12/S stainless steel ball push button with 12 buttons module is intended for collaboration with the DS-KD8003-IME1 video intercom module. The modules of the DS-KD-xx series are mounted in special housings of the DS-KD-ACF/S (flush-mounted housings) and DS-KD-ACW/S (surface-mounted housings) series. Masking frames are supplied with the housings from both series.Product info

Read more less

HikVision Blank module for video intercom Blank module, 98.21mmx100.21mm x33.7mm Product info  

Read more less

The DS-KD-KK module is intended for cooperation with the DS-KD8003-IME1 video intercom module. The modules of the DS-KD-xx series are mounted in special housings of the DS-KD-ACF (recessed housings) and DS-KD-ACW (surface-mounting housings) series. Aluminum masking frames are supplied with the housings from both series.Product info

Read more less

The DS-KD-M module is designed to work with the DS-KD8003-IME1 video intercom module.The modules of the DS-KD-xx series are mounted in special boxes of the DS-KD-ACF (integrated boxes) and DS-KD-ACW (surface-mounted boxes) series. The aluminum masking frames are supplied with the boxes of the two series.Product info

Read more less

The DS-KD-IN module is intended for cooperation with the DS-KD8003-IME1 video intercom module. The device is used for visual signaling of the status of the voice connection of the video intercom to the indoor panel and the opening status of the gate.The modules of the DS-KD-xx series are mounted in special housings of the DS-KD-ACF (recessed housings) and DS-KD-ACW (surface-mounting housings) series. Aluminum masking frames are supplied with the housings from both series.Product info

Read more less

Product info 

Read more less

The DS-KD-KP module is intended for cooperation with the DS-KD8003-IME1 video intercom module.The modules of the DS-KD-xx series are mounted in special housings of the DS-KD-ACF (recessed housings) and DS-KD-ACW (surface-mounting housings) series. Aluminum masking frames are supplied with the housings from both series.Product info

Read more less

The Hikvision DS-KD-DIS module is designed to work with the DS-KD8003-IME1 or DS-KD8003-IME2 video intercom outpost. With this handy and professional display module, which contains a 3.5-inch LCD screen, an indoor station can be called from the contact list shown on the display.Product info

Read more less

DS-KD-TDM multifunctional display/control module, suitable for multiple apartments or companies. Important features Modular door station Touch & Display module, mounting bracket required 4 inch touchscreen, IP65 (IK8) Choose caller ID, PIN and card unlock, contact list and ad display Stores and searches contact list Multiple languages Mifare card reader on board Adjustable with bell buttons or 

Read more less

DS-KD7003EY-IME2 2-Wire HD outdoor station Aluminum This is a modular intercom unit for two-wire systems. The camera has a 2MP lens (1920x1080 Full HD). The system is easy to scale up by adding a module from the series (bell pushes/buttons or other modules, Mi-Fare EM Readers, etc. These are easy to connect to the basic unit. The Module is equipped with a Mic and Speaker. This module contains 1 doorbell button and an HD camera with a resolution of 1920 x 1080 px and a viewing angle of 133° horizontally and 82° vertically. The video is compressed with H.264 codec. Sound transmission is provided by a built-in microphone and speaker. The videophone can be connected to the network via Ethernet (1x 10/100Mbps). The videophone can be powered via a 12V DC connection on the terminal block or via a 2-wire power supply, which also serves to supply data to the distribution unit (DS-KAD7060EY). The power consumption is less than 6W. The module is IP65 certified for outdoor use.The modular solution is a novelty in the intercom range, allowing you to assemble the entire system exactly according to the customer's wishes. Surface-mounted and flush-mounted boxes are available. Specifications: System Parameters Operating SystemEmbedded Linux operating system ROM4GB RAM256MB CPUEmbedded Processor Display Parameters ScreenSizeAFTER Operation MethodAFTER TypeAFTER ResolutionAFTER Video Parameters Supplement LightLow illumination, IR supplement lights Video StandardH.264 Lens1 FOVHorizontal: 133°, Vertical: 82° WDR Support Resolution2 MP Audio Parameters Audio Compression StandardG.711 U, G.711 A Audio Input Built-in omnidirectional microphone Audio OutputBuilt-in loudspeaker Audio Compression Bitrate64Kbps Audio QualityNoise suppression and echo cancellation Volume AdjustmentAdjustable Capacity UserCapacity 2000 Linked Indoor Station Capacity Max.99 Sub Door Station Capacity 16 Network Parameters Wired Network10/100 Mbps self-adaptive through 2-wire interface WiFiOnly AP mode for configuration BluetoothAFTER 3G/4GAFTER Device Interfaces Alarm Input2(supports Exit button or Door contact input) Network InterfaceAFTER TAMPER1 Exit Button1 By Contact Input1 RS-4852 (RS485 out for Hikvision's sub module communication, RS485 for reservation) WiegandAFTER TF CardAFTER Alarm OutputAFTER DIP Switch6 decimal DIP switch Lock Control2 (1 relay, max to 30 VDC, 2 A;1 DC pulse,20V 4A impulsive,300 mA holding current,30 ohm max ) Power Interface48V,Powered by distributor DS-KAD7060EY or 12VDC Two-Wire IP Interface1 General Button0-2(Flexible adjustment) InstallationSurface mounting & flush mounting Indicator4 LED lights(Opening by? Calling? Intercom? In use) WeightWith package: 426g ( 0.94lb),Without package: 290g ( 0.64lb) Protective LevelIP65 IK08 Working Temperature -40° C to 60° C (-22° F to 140° F) Working Humidity 10% to 90% Dimensions 99.5mm × 98.5mm × 35mm (3.92" × 3.88\" × 1.37\") Battery Power Supply48V,Powered by distributor DS-KAD7060EY or 12VDC Application EnvironmentOutdoor Power Consumption≤ 6W LanguageEnglish, Bulgarian, Hungarian, Greek, German, Italian, Czech, Slovak, French, Polish, Dutch, Spanish, Romanian, Estonian, Croatian, Slovenian, Serbian, Ukrainian, Portuguese

Read more less

DS-KD7003EY-IME2, 2-Wire Modular intercom, camera module with stainless steel finish. Enjoy razor-sharp HD images and a wide field of view thanks to WDR technology, so you always have a clear view of who is at your door. The door station is compatible with various released sub-modules, which ensures maximum flexibility when expanding your system.Easily configure and manage your door station via mobile web configuration in AP mode. With the DEC button configuration and plug & play functionality, installation is a breeze. Thanks to the different indicators for door opening, calls, busy and in use, you will always be informed of what is happening.Easily customize the door station buttons to your wishes, whether you choose single or double buttons. Additionally, this system supports dual lock control for added security and convenience.Specifications: Operating System - Embedded Linux operating system rom - 4GB RAM - 256MB CPU - Built-in processor Video parameters Supplement Light - Low lighting, IR supplement lighting Video standard - H.264 Lens - 1 field of view - Horizontal: 133°, Vertical: 82° WDR - Supports  Resolution - 2 MP Audio parameters Audio compression standard - G.711 U, G.711 A Audio input - Built-in omnidirectional microphone Audio output - Built-in speaker Audio compression bit rate - 64 Kbps Sound quality - Noise reduction and echo cancellation Volume Adjustment - Adjustable Capacity User capacity - 2000 Capacity of linked indoor stations - Maximum 99 Sub door station capacity - 16 Network parameters Wired - network 10/100 Mbps self-adaptive via 2-wire interface Wifi - AP only mode for configuration Device interfaces Alarm input - 2 (supports exit button or door contact input) Tamper - 1 Shutdown button - 1 Door contact input - 1 RS-485 - 2 (RS485 out for Hikvision's sub-module communication, RS485 for reservation)  DIP switch - 6 decimal DIP switch Lock Control - 2 (1 relay, max to 30 VDC, 2 A; 1 DC pulse, 20 V 4 A impulsive, 300 mA holding current, 30 ohm max) Power interface - 48V, powered by distributor DS-KAD7060EY or 12VDC Two-wire IP interface - 1 General Knob - 0-2 (Flexible adjustment) Installation - Surface mounting and flush mounting Indicator - 4 LED lights (door open, ringing, intercom, in use) Weight With packaging: 426 g (0.94 lb), without packaging: 290 g (0.64 lb) Protection level - IP65 IK08 Operating temperature - -40° C to 60° C (-22° F to 140° F) Working humidity - 10% to 90% Dimensions - 99.5mm × 98.5mm × 35mm (3.92" × 3.88" × 1.37") Power supply - 48V, powered by distributor DS-KAD7060EY or 12VDC Application Environment - Outdoors Power consumption - ≤ 6 W

Read more less

The DS-KD-KP module is intended for cooperation with the DS-KD8003-IME1 video intercom module. The modules of the DS-KD-xx series are mounted in special housings of the DS-KD-ACF (recessed housings) and DS-KD-ACW (surface-mounting housings) series. Aluminum masking frames are supplied with the housings from both series.

Read more less