Hikvision power supplies

Power adapter AC/DC with 4 outputs DC 12V 5A A DC12V 5A power supply with 4 x 12V DC Jack connectors can be used to power various devices that operate on a DC voltage of 12V and require a current of up to 5A. It is important to ensure that the polarity of the power supply connections matches that of the device you wish to power to avoid damage to your equipment. In addition, it is important to ensure that the total current supplied by the power supply does not exceed the maximum current that the power supply can supply (in this case 5A).

Read more less

Hikvision DS-KAD612 Power 12x, network 4x The Hikvision DS-KAD612 is an integrated audio/video distributor that supports power supply via the network cable. The module has a built-in regulated power supply and 16 10/100M LAN interfaces, 12 of which support power supply through network cables. It is suitable for connecting all Hikvision digital video intercom devices.  

Read more less

24VDC, 2.5A Power supply, including for Intercom Power SupplySuitable for the KAD-706 intercom power supply and audio distributor.• 24VDC output, 230v input• 2.5 amps • LED light for indicating power status• With power cord and 2-wire power plug 

Read more less

DS-KAW60-2N, Intercom Power Supply, 60W, 24V DC, DIN rail versionProduct Info

Read more less

Hikvision 2-Wire Master Video/Audio Distributor Attention!! only works on the new 2-wire intercom modules (Y) series 2-wire IP distributor 6x 2-wire cascade interfaces with device power supply 2x cascade interfaces for DS-KAD706Y / DS-KAD706Y-S 8x interface indicators, 1 RJ-45 interface, 1 reset button Din rail mounting, 24VDC  

Read more less

Plug-in power supply 12 volts 1 ampere for cameras, intercom outdoor stations, indoor stations, etc.This switching power supply converts 230V AC to 12V DC. The maximum current that this power supply can supply is 1Amp. DC Plug 5.5mm x 2.1mm, cable length approx. 1.50m.      

Read more less

Hikvision DS-KAD706, 2-Wire Video/Audio Distributor Attention! This switch does not come with a 24-volt power supply as standard. Here you will find a power adapter and here you will find a Din-rail versionOnly 1 outdoor station and multiple indoor stations can be connected to this power supply module. Please note, this model cannot be combined with the "Y" models Hikvision intercom series. DS-KAD706-S The device has 6 2-wire sockets for connecting monitors and external panels (power supply and signal transmission) and 1 Ethernet socket for connecting a LAN network. In addition, one of the ports is designed to power an extended door station with a maximum power of 16W. In addition, the switch is equipped with additional outputs for 2-wire buses that serve for cascading with DS-KAD706-S. You can also connect the switch to a LAN network, giving you access to opening the port and the ability to record conversations from the video intercom through a mobile application. When connecting a cascade of devices to a LAN network, we recommend connecting the DS-KAD706-S switch to the cascade.Only CH6 is for an outdoor station module. The other channels are intended for internal stations. For more information about the recommended cables, we recommend Here to take a look. Product Info

Read more less