Hikvision readers standard

DS-K1108E card reader, EMThe DS-K1108E is a card reader from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read EM cards and be connected to Hikvision's Basic+ and Pro Complete door controllers.EM vs MiFareHikvision supplies card readers with the option to read EM or MiFare. This choice is in the reader and cannot be adjusted via software. MiFare has stronger encryption. If other EM solutions are already available, EM can also be chosen.RS-485 vs WiegandHikvision card readers such as the DS-K1104M are equipped with connection options for both Wiegand and RS-485.Wiegand has the potential disadvantage that more cores (7) are needed to achieve the correct connection. After this, however, no programming is required in the reader and everything can be set via the software.RS-485 has the advantage that fewer cores are required (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. RS-485 can also be used in a bus form instead of a star topology. With RS-485, however, it is necessary for this reason to give the readers the corresponding address via dip switch. The order affects the setting options and therefore requires attention when making the setting. Readers that are considered entering are numbered odd, readers that are used when exiting the secured area are numbered even. Specifications:Wiegand connection - RS-485 connection.- 32-bit high-speed processor- Reading distance 3-5cm- Built-in audio indicator- LED status indicator- RS485 and Wiegand(W26/W34) protocol;- Tamper alarm;- Online upgrade function (if connected via 485)- EM recognition and card reading

Read more less

DS-K1108EK card reader with code keys, EMThe DS-K1108EK is a card reader with code keys from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read MiFare cards and be connected to Hikvision's Basic+ and Pro Complete door controllers.EM vs MiFareHikvision supplies card readers with the option to read EM or MiFare. This choice is in the reader and cannot be adjusted via software. MiFare has stronger encryption. If other EM solutions are already available, EM can also be chosen.RS-485 vs WiegandHikvision card readers such as the DS-K1108EK are equipped with connection options for both Wiegand and RS-485.Wiegand has the potential disadvantage that more cores (7) are needed to achieve the correct connection. After this, however, no programming is required in the reader and everything can be set via the software.RS-485 has the advantage that fewer cores are required (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. RS-485 can also be used in a bus form instead of a star topology. With RS-485, however, it is necessary for this reason to give the readers the corresponding address via dip switch. The order affects the setting options and therefore requires attention when making the setting. Readers that are considered entering are numbered odd, readers that are used when exiting the secured area are numbered even. Wiegand connection - RS-485 connection.Specifications:- 32-bit high-speed processor- Reading distance 3-5cm- Built-in audio indicator- LED status indicator- RS485 and Wiegand(W26/W34) protocol;- Tamper alarm;- Online upgrade function (if connected via 485)- EM recognition and card reading

Read more less

DS-K1108MK card reader with code keys, MiFareThe DS-K1108MK is a card reader with code keys from Hikvision's access control line. The card reader can be connected via RS-485 or Wiegand. The beautifully designed card reader can be used both indoors and outdoors. The card reader can read MiFare cards and be connected to Hikvision's Basic+ and Pro Complete door controllers.EM vs MiFareHikvision supplies card readers with the option to read EM or MiFare. This choice is in the reader and cannot be adjusted via software. MiFare has stronger encryption. If other EM solutions are already available, EM can also be chosen.RS-485 vs WiegandHikvision card readers such as the DS-K1108EK are equipped with connection options for both Wiegand and RS-485.Wiegand has the potential disadvantage that more cores (7) are needed to achieve the correct connection. After this, however, no programming is required in the reader and everything can be set via the software.RS-485 has the advantage that fewer cores are required (4). Another major advantage of RS-485 is that the reader supports two-way communication with the door controller. RS-485 can also be used in a bus form instead of a star topology. With RS-485, however, it is necessary for this reason to give the readers the corresponding address via dip switch. The order affects the setting options and therefore requires attention when making the setting. Readers that are considered entering are numbered odd, readers that are used when exiting the secured area are numbered even. Specifications:Wiegand connection - RS-485 connection.- 32-bit high-speed processor- Reading distance 3-5cm- Built-in audio indicator- LED status indicator- RS485 and Wiegand(W26/W34) protocol;- Tamper alarm;- Online upgrade function (if connected via 485)- MiFare recognition and card reading

Read more less

Main Features:Supports RS-485, Wiegand (W26, W34) protocol and OSDP protocolSupports reading MifareTamper-resistant functionBuilt-in buzzer for status indication

Read more less