Dahua Intercom IP

The Dahua DH-PFS3106-4ET-60 is a rugged, unmanaged PoE switch specially designed for surveillance and industrial environments. Thanks to its compact, stable design and extensive functionalities, it is very suitable for outdoor installations or industrial installations where reliability under harsh conditions is required. Ideal as an access layer switch in CCTV / IP camera systems, for example in outdoor environments (road intersections, car parks, industrial estates). Extremely suitable for situations where the temperature range or welded conditions are strict. Thanks to the long-distance PoE mode, it can be used for cameras at a greater distance from the switch, without a separate power supply. Automatic “reboot” of frozen devices via PoE Watchdog reduces maintenance efforts. General Type: Layer 2 unmanaged PoE switch Application: surveillance systems, industrial and outdoor applications Robust metal housing – suitable for DIN rail, wall or desktop mounting Supports redundant power supply (dual power input) Network ports 4×10/100 Mbps PoE ports (RJ-45) 1 × 10/100/1000 Mbps uplink (RJ-45) 1 × 100/1000 Mbps SFP port (fiber optic) PoE specifications Supports IEEE 802.3af / 802.3at and Hi-PoE (up to 60W) Maximum total PoE power: 60W Hi-PoE port: 60 W (one dedicated port) Standard PoE ports: up to 30 W per port PoE Watchdog: automatic restart of unresponsive devices Extend mode: PoE distance to 250 meters (10 Mbps speed) Performance Switching capacity: 6.8Gbps Parcel transit: 3.57 Mpps Buffer memory: 1 Mbit MAC address table: 8 K Nutrition and consumption Supply voltage: 48–57 VDC Power consumption without load: approx. 2.5 W Maximum consumption (full PoE load): 60W Environmental specifications Operating temperature: –30 °C to +65 °C Storage temperature: –30 °C to +70 °C Relative humidity: 5% – 95% (non-condensing) Protection: Air discharge 15 kV Contact discharge 8 kV Overvoltage protection (common & differential mode) Physical properties Dimensions: approx. 150 × 100 × 30 mm Weight: approx. 0.44 kg Housing: sturdy metal, suitable for industrial mounting  

Read more less

PFA7753 Sunshade white for DB41 WiFi doorbell   The PFA7753 is intended for the DB41 WiFi video doorbell when it has to look up or down against the sun. With this vertical bracket with an angle of 15 degrees you can better visualize the visitor. Can be applied both up and down Specifications General information Type Mounting accessories Physical properties Color White Depth 130 (mm) Length / Height 54 (mm) Weight 22 (gr) Width 33 (mm) Material PVC  

Read more less

The Dahua DH-PFS3110-8ET-96 is a robust, unmanaged Hardened PoE switch (layer 2), ideal for demanding environments such as outdoor installations, CCTV networks and industrial applications. It combines multiple PoE ports with gigabit uplink capabilities and smart features such as PoE watchdog and long-distance PoE. PoE support 4 × RJ-45 ports (10/100 Mbps) with PoE (IEEE 802.3af/at) Port 1 is a “Hi-PoE” port and can deliver up to 60 W Ports 2 through 4 deliver up to 30W per port, with a total PoE capacity of 60W  Support for intelligent PoE (dynamic management, prioritization)  PoE Watchdog (automatic restart of PoE devices in case of failure) Support for PoE over longer distances (up to approx. 250 m at lower data rates) in 'Extend' mode  Network ports & uplinks 1 × RJ-45 uplink port (10/100/1000 Mbps)  1 × SFP (optical) uplink port (100/1000 Base-X) for fiber optic connection  Switch capacity of 6.8 Gbps and packet forwarding speed of approximately 3.57 Mpps  MAC table for approx. 8,000 addresses  Environment & robustness Operating temperature: –30 °C to +65 °C  Housing with lightning/overvoltage protection (common mode, differential mode), ESD protection included Dual power supply support (redundancy)  Compact size (approx. 150 × 108 × 30 mm) and weight around 440 g

Read more less

PFA7753-B Sunshade black for DB41 WiFi doorbell    The PFA7753-B is intended for the DB41 WiFi video doorbell when it has to look further up or down against the sun. With this vertical bracket with an angle of 15 degrees you can better visualize the visitor. Can be applied both up and down Specifications General information Type Mounting accessories Physical properties Color Black Depth 130 (mm) Length / Height 54 (mm) Weight 22 (gr) Width 33 (mm) Material PVC  

Read more less

Dahua DH-CS4006-4ET-60, 4xPoE 100Mb ports, Smart Switch, 2x Uplink Gigabit Can be used as a Cloud managed, web managed or unmanaged switch: By default, the IP address is set to DHCP and is obtained automatically. The switch is also configured in such a way that it should not cause any problems with third-party network equipment. This makes the switch plug & play and just as easy to use as an unmanaged switch Fully integrated with Dahua DoLynk: Dolynk is a cloud management environment for the installer. The cloud managed switches can be fully configured and monitored from this environment or with the Dolynk app Managed switch functions, the following functions are available STP, spanning tree protocol VLAN, suitable for working with virtual networks PoE management, configure PoE properties per port Specification Details Includes power adapter Yes PoE Yes Ethernet ports 4 Ethernet port speed 10/100 Mbps Ethernet port uplink speed 10/100/1000 Mbps Description of function slots Port 1-4: 4 × RJ-45 10/100 Mbps (PoE) Port 5-6: 2 × RJ-45 10/100/1000 Mbps (uplink) Reset button 1 Nutrition External power supply: 53 VDC, 1,226 A Operating temperature –10 °C to +55 °C (+14 °F to +131 °F) Operating humidity 5%–95% (RH), non-condensing Storage temperature –40 °C to +70 °C (–40 °F to +158 °F) Storage humidity 5%–95% (RH), non-condensing Energy consumption Stationary: ≤3 W ; Full load: 65 W Low Layer 2 Type of management Yes Smart Managed Switch Yes MTBF 232.62 years Switch capacity 4.8Gbps Packet forwarding capacity 3.57 Mpps Packet buffer size 4 Mbit Jumbo Frame 9216 Byte MAC table size 8K VLAN number 32 Standard communication IEEE802.3; IEEE802.3u; IEEE802.3x; IEEE802.3ab PoE protocol IEEE802.3af; IEEE802.3at; Hi PoE PoE power Port 1 ≤ 60 W, Port 2-4 ≤ 30 W, total ≤ 60 W PoE power management Yes PoE pin assignment 1,2,4,5?V+?,3,6,7,8?V-? Long-distance PoE transmission Yes VLAN function Port-based VLAN IEEE 802.3x Flow Control Yes DHCP function DHCP Client Equipment management Web management; App management Static protection Air discharge: 8 kV; Contact discharge: 6 kV Protection against lightning Common mode: 4 kV; Differential mode: 2 kV Net weight 0.28kg (0.64lb) Gross weight 0.92kg (2.02lb) Product dimensions 130 mm × 90 mm × 26 mm (5.11" × 3.54" × 1.02") (L × W × H) Packaging dimensions 265 mm × 238 mm × 76 mm (10.43" × 9.37" × 2.99") (L × W × H) Housing material Metal plate Installation Desk mounting; wall mounting      

Read more less

Dahua VTH5221DW 7" WiFi intercom door monitor The Dahua 7'' WiFi intercom indoor monitor is equipped with the latest technology and is intended for Dahua's IP intercom system. Ideal to use as a second indoor monitor.     

Read more less

VTM115 surface-mounted housing for the outdoor station Dahua : Surface mounting box for VTO2202F(-P) 129 x 95 x 28.50mm          

Read more less

VTH5441G Indoor unit, 10 inch touch screen, Full HD, internal memory 8GB SD, SIP, PoE 10 inch capacitive touch screen Monitor, resolution 1024 x 600, 1 x 10/100Mbps network connection, supports up to 8 outdoor stations, internal communication between multiple VTH monitors possible, display of IPC cameras possible, equipped with SD card slot, snapshot recording when ringing the doorbell or monitoring possible on SD card, door opening possible remotely, supported smartphone App (Plus version), power supply PoE or 12Vdc, surface mounting.      

Read more less

VTM114 built-in housing for the outdoor station Dahua, built-in mounting box for VTO2202F(-P) dimensions frame 163 x 129, box 157 x 123x 33          

Read more less

DH-VTM123 Desk stand for VTH24x Dahua Desktop Bracket  Size: 190mm*100mm*54mm Dip angle: 45° Desktop mounted bracket for indoor monitor  

Read more less

VTO2202F-P-S3 outpost, IP and 2-wire, 160° camera, PoE Dahua, door station, IP and 2-wire use, 2MP WDR camera with IR light, Mechanical button, Night vision & voice indicator, 160° viewing angle. Power supply via 2-wire, front plate in aluminum alloy, IP55 & IK07, surface-mounted and flush-mounted box not included, power supply via 2wire or PoE. Exclusively available in surface-mounted or surface-mounted housing with rain cover, see related products below. The VTO2202F-P-S3 is an outdoor station from the new generation of Dahua Video Intercom products. The communication of this generation of video intercom products uses the SIP protocol. This protocol ensures a good speaking-listening connection and offers options for integration with third parties. The appearance of the outdoor station has been modernized, vandal-resistant and IP55. The VTO2202F-P-S3 is suitable for both IP and/or 3rd generation 2-wire Intercom products. The VTO2202F-P-S3 is compatible with all Dahua Video Intercom IP products from firmware version 4.3.  Pros: PoE: This intercom is suitable for PoE. This makes it possible to provide the module with power and network connection with one network cable. This does not include power supply for the door lock. Stand-alone: This outdoor station can be used standalone as a video doorbell. This means that the outdoor station can be directly linked to the Dahua DMSS app. 2nd Door control from secured area with the DEE1010B: The DEE1010B is a module that can be connected to the main module via RS485. This allows additional contacts to be added to the VTO2202F-P-S2 system over a secure connection. The most important connection on the module is the NO/NC relay. This can be used as a 2nd door control. Suitable for PoE and 2-wire communication: The VTO2202F-P-S2 is suitable for IP technology with power supply over PoE and can simultaneously combine this with 2-wire communication.  Push notifications in DMSS app: It is possible to receive push notifications in the DMSS app. By adding the outdoor station to the app. An internal station is not necessary for this VTO.  Points of attention: H.265: By default, the video compression is set to H.265, however, some indoor units only support H.264. The compression can be changed in the VTO settings Lighting: The nameplate of the VTO is not illuminated, which makes the nameplate less readable in the dark 3rd generation 2-wire switches cannot be used in combination with 2nd generation 2-wire switches: The S3 models support 3rd generation 2-wire communication. This also means that they are not suitable for combining with the previous 2nd generation switches. Based on IP, these generations are compatible with each other. By linking both switches together based on IP, mutual communication is possible Door lock power supply not via PoE: An external power supply is required to power a door lock.  Sealing: The front of the outdoor station is IP65, the rear still needs to be sealed Notifications/Notifications in DMSS may be delayed: When you ring the doorbell, the notifications are sent directly by the outdoor station, so they generally arrive quickly. But they can also arrive delayed. Various factors influence this, such as internet speed on the sending and receiving side, traffic on Dahua's cloud servers and the status of the notification servers of Apple and Android. External bell/buzzer only possible in combination with VTH:Without an internal unit, this outdoor unit cannot control an external doorbell Advice: Outdoor installation: The intercom unit is IP65 and therefore suitable for outdoor installation. It is spray-proof up to 12.5 liters per minute. The rear must be completely sealed off. Too much water can have a negative effect on the operation of the outdoor station. It is therefore advised to be careful when placing the intercom in the direct outdoors where wind and rain have free rein.  DMSS app and push notifications for multiple users: Be careful with the number of users who will work with the app and this intercom system. The advice is to use no more than 5 users per push button. Also, the module is not powerful enough to send video and audio data to a large number of users at the same time, Multiple Dahua Outposts: It is possible to use multiple and different outdoor stations in one system. Please note that a maximum of 1 outdoor station can serve as a SIP server. The rest becomes subordinate.  Keeps the firmware versions the same: Try to work as much as possible with the same firmware versions for the indoor and outdoor stations. The latest firmware can be found on the product under the downloads tab.       

Read more less

Dahua VTM05R Rain Cover Surface Mounted for VTO2202/2201 Aluminum rain cover in gray color. General: Color Silver   Weight 0.309 kg   Water resistant IP65   Dimensions 141.1mm × 101.6mm × 48.5mm

Read more less

VTM09R Rain Cover Surface Mounted for VTO2211G Plastic rain cover for the VTO2211G  General: Color Silver   Weight 0.75kg   Water resistant IP65   Dimensions 158.2mm × 106.5mm × 35.5mm

Read more less

Display Resolution 1024 × 600   Display 7-inch screen   Screen type Capacitive screen Interface Audio Input 1x microphone   Audio Output Built-in speaker   Alarm Input 6x   Alarm Exit 1x General Network 1x 2-Wire interface 1x PoE 10M/100Mbps Self-adaptive   Max distance 2-Wire 100m   Nutrition VTNS1006A-2 or PoE   Accessories Incl. wall mounting   Storage Capacity SD Card Max 64GB SD card for storagerecordings, snapshotsand messages left   Max Consumption 7W   Dimensions 189.0mm × 130.0mm × 26.9mm   Working temperature -10°C ~+55°C    Maximum number of IP cameras 32 This indoor monitor is best connected to a VTNS2003B 2-wire distribution switch/power supply or via PoE to a network PoE switch   

Read more less

Surface-mounted box Angled 30 degrees for VTM05R Rain Cover/VTM115 BoxThe bracket is for indoor and outdoor use and is supplied without screws. Two long screws and two short screws are required for mounting. The sloping surface-mounted container is made of Tough PLA Black and 3D printed. It is possible to hang the bracket on both the left and right sides. This product is not an official Dahua part

Read more less

Dahua VTM07R Rain Cover Surface Mounted for VTO3211D Aluminum rain hood for the VTO32xx series. General: Color Silver   Weight 0.511 kg   Water resistant IP65   Dimensions 195.72mm × 114.4mm × 66.6mm

Read more less

Dahua VTH5422H Video Intercom 7" indoor unit PoE and 2-Wire black Dahua IP indoor monitor for intercom, black, 7 inch TFT, touchscreen, sip protocol, power supply via PoE or 2 wire switch, connection via RJ45 or 2 wire possible. 7 inch capacitive touchscreen, resolution 1024x600, network connection 1 x 10/100 Mbps, support for external drive, provided for SD card, image recording (snapshot) possible on SD card of calls and visualization, remote door opening possible, Smartphone App function power supply via PoE (802.3af) or 2 wire switch, surface mounting, wall mounting, SIP protocol, RS485 port,  

Read more less

VTM05R Black Rain Cover Surface Mounted for VTO2202/2201 Aluminum rain cover in black color. General: Color Black   Weight 0.309 kg   Water resistant IP65   Dimensions 141.1mm × 101.6mm × 48.5mm

Read more less

Key Tag IC 13.56MHz per piece

Read more less

VTM115 Black, surface-mounted housing for the outdoor station Dahua : Surface mounting box for VTO2202F(-P) Black 129 x 95 x 28.50mm          

Read more less

VTM114 built-in housing for the outdoor station Dahua, built-in mounting box for VTO2202F(-P) black outdoor station dimensions frame 163 x 129, box 157 x 123x 33          

Read more less

The Dahua VTO2311R-WP is a narrow outdoor station for doorbell and access control systems. The design is only 5cm wide and 16cm long, making it easy to install on narrow surfaces. The outdoor station supports both PoE and Wi-Fi, so a separate power supply is sufficient when using Wi-Fi. A stable Wi-Fi connection is required for proper functioning of the DMSS app or communication with the indoor unit. It is also possible to use the outdoor station without an internal station, but then it is not possible to control an external bell. The outdoor station is supplied with a rain cover and a mounting bracket. With the card reader module, up to 3000 users can be created for access control. Specifications: System Main Processor - Built-in processor Button type - Mechanical Interoperability - ONVIF; C.G.I Network Protocol - RTSP; DNS; P2P; UPnP; RTP; RTMP; YES; SSH; HTTP/HTTPS; ONVIF Basic camera - 1/2.8" CMOS 2 MP HD camera Field of view - H: 110°; V: 62°; D: 133° WDR - 120dB Noise reduction - 3D NR; 2D NO Video compression - H.264; H.265 Video resolution - Main stream: 720p, WVGA, D1 and CIF ; - Substream: 1080p, WVGA, D1, QVGA and CIF Video frame rate - PAL: - 25fps NTSC: - 30 fps Video bitrate - 768 kbps–8 Mbps Light compensation - Automatic IR Day Night - Auto (ICR)/Color/B/W; Colour/B/W Audio Compression - G.711a; G.711u; PCM Audio input - 1 Audio output - Built-in speaker Audio mode - Two-way audio Audio Enhancement - Echo Cancellation/Digital Noise Reduction; Echo cancellation; Digital noise reduction Audio bit rate - 16 kHz, 16 bits Function Communication mode - Fully digital Unlock Mode - Card; app; indoor monitor Card type - IC card Automatic snapshot - Yes (SD card is inserted in the indoor monitor or door station) Exit Videos - Yes (SD card inserted in VTH/VTO is required) Web Configuration - Yes Wifi - Yes Wireless standard - IEEE 802.11b; IEEE 802.11g; IEEE 802.11n Wireless frequency range - 2.4 GHz Storage - Micro SD card (max. 256 GB) Achievement Map reading distance - 0cm–3cm (0"–1.18")  Housing - PC+ABS Capacity Card capacity - 3000 Gate Shutdown button - 1 Door status detection - 1 Lock control - 1 Network Port - 1 × RJ-45 10/100 Mbps Ethernet port Alarm Tamper alarm - Yes General Appearance color - light gray Power supply - 12–33 V DC, 1 A; Standard PoE Charger - Optional Installation - Surface mounting Certifications - EC; FCC Accessories - Included: Alarm power ribbon cable, rain cover Product Dimensions - 160mm × 50mm × 30mm (6.30" × 1.97" × 1.18") Protection - IP65 Operating temperature - –40 °C to +60 °C (–40 °F to +140 °F) control humidity - 10%–90% (RH), non-condensing Operating altitude - 0 m–3,000 m (0 ft–9,842.51 ft) Power consumption - ≤ 3.5 W (standby), ≤ 6 W (operating) Gross weight - 0.4 kg (0.88 lb) Net weight - 0.18 kg (0.40 lb)

Read more less

DS1AG wireless bell/speaker for DB41 series WiFi doorbells The DS1AG from Dahua is a wireless indoor bell that emits a sound as soon as the doorbell rings via a linked video doorbell. You can plug this model directly into a wall socket. You can easily set the volume and melody to your liking via the DMSS app. The chime can be connected to multiple video doorbells at the same time, so you can receive a notification in multiple places in the house. The speaker can be plugged directly into a wall socket and works via Wi-Fi. Wireless indoor bell for video doorbells from Dahua Built-in speaker Multiple ringtones available Volume and melodies adjustable via the DMSS app Works via Wi-Fi (IEEE 802.11b/g/n/ax, 2.4 GHz) Supports connection with multiple video doorbells at the same time Compact and lightweight design (only 0.1 kg) Easy installation on mains power (100–240 VAC)  

Read more less