Jablotron accessories
-
Jablotron CC-03 Installation cable for the JABLOTRON 100 system, equipped with an extra pair of wires
Jablotron CC-03 Installation cable for the JABLOTRON 100 system, equipped with an additional pair of wires The Cable CC-03 is used for easy installation of the bus line for the JABLOTRON 100 system with 2 other pairs of auxiliary conductors. 250 meters, each meter marked in black.The colors of the conductors correspond to the color marking of the bus for JABLOTRON 100 and thus simplify the connection of the bus peripherals of the alarm system.
€565,53
-
Jablotron JS-7902 curtain lens
Jablotron JS-7902 curtain lensThe JS-7902 curtain lens. This corridor lens has a length range of 10 meters. This lens is excellent for detecting moving heat sources in a focused beam (curtain) and can be placed in any Jablotron PIR.
€2,76
-
Jablotron JS-7910 pet lens
Jablotron JS-7910 pet lensThe Jablotron JS-7910 Pet lens or pet lens is a lens that you can place in the PIRs of the Jablotron alarm system, with the exception of the JA-85P 360° PIR. The PET lens ensures that pets are not seen by the PIR up to a certain extent. Even small children are not seen by the PIR if a PET lens is placed in front of it. Adults are simply detected by the PIR with PET lens.
€2,76
-
Jablotron JS-7904 curtain lens
Jablotron JS-7904 curtain lensThe Jablotron JS-7904 curtain lens. This corridor lens has a length range of 25 meters. This lens is excellent for detecting moving heat sources in a focused beam (curtain) and can be placed in any Jablotron PIR.
€2,76
-
Jablotron JA-116H BUS expander - 16 inputs
Jablotron JA-116H BUS expander - 16 inputsThe Bus expander is an expansion module used to drive and connect up to 16 sensors with contact outputs . This extension makes it possible to connect Jablotron and non-Jablotron related products such as infrared sensors, fire detectors or other detectors. This module can be installed directly in the control panel housing (JA-101K(R) and JA-106k(R).
€202,41
-
Jablotron AWZ-300 Backup power source 3A
Jablotron AWZ-300 Backup power source 3AJablotron AWZ-300 Backup power source 3A• Power supply 230 V AC / 50 Hz • Output power 13.3-13.8 V DC• Transformer power 80 VA• Maximum permanent current 3A (with rechargeable battery)• Maximum output current 5A (peak, with rechargeable battery)• Electronic short-circuit protection• Current protection (overload) electronically• Transformer power consumption at rated load 0.38 A• Rechargeable battery capacity 17 Ah / 12 V• Dimensions 237 x 307 x 95 mm• Weight without battery 3.8kg
€148,71
-
Jablotron JA-151N Wireless signal output module PG
Jablotron JA-151N Wireless signal output module PGThe Jablotron JA-151N Wireless signal output module PG is a wireless PG power module (1 A/12/24 V DC required). It copies the status of a selected PG output of the JA-100 system (PG1 to PG32).A specific PG output can be selected via the printed circuit board with 5 DIP switches. This module does not occupy a position in the JA-100 system.• Power supply 12 - 24 V DC, not included as standard • Output relay load: max. 1 A/30 V DC• 1 PG output: 3 x terminals C, NC, NO• Environment according to EN 50131-1, EN 50131-3: II, internal• Operating temperature -10 to + 40 ° C
€123,81
-
Jablotron JA-110T BUS short circuit isolation module
Jablotron JA-110T BUS short circuit isolation moduleThe Jablotron JA-110T BUS short circuit isolation module is designed to separate and protect unprotected parts of the BUS wiring. It is powered by the BUS from the control panel. It can be installed in a JA-190PL housing. It is not possible to assign it a zone (it does not occupy a position in the alarm system).Product Info
€62,10
-
Jablotron JA-121T Converter module
Jablotron JA-121T Converter module The Jablotron JA-121T module is a universal converter to RS-485 for other systems. It synchronizes the transfer from the JABLOTRON 100 system bus to the RS-485 serial line and back.Used, for example, to connect to an intelligent home. Contains galvanic isolation circuits sized for a test voltage of 4 kV. The data is sent when the status changes or on request. In passive mode, all data is sent only on request. The module is addressable and occupies one position in the system.
€450,00
-
Jablotron JA-190PL Multifunctional installation housing
Jablotron JA-190PL Multifunctional installation housingThe Jablotron JA-190PL Multifunctional installation housing can be used for various modules of the JA-100 system.Product Info
€5,37
-
Jablotron CC-01 Installation cable for the JA-100 system
Jablotron CC-01 Installation cable for the JA-100 systemThe Jablotron CC-01 Installation cable for the JA-100 system is designed for easy installation. The colors of the cables are identical to the colors of the terminals. 300 meters of cable and each meter marked in black.• 1 x 2 x 24 AWG (0.5 mm) max. Conductor DC resistance 20 °C 97 O/km• 1 x 2 x 20 AWG (0.8 mm) max. Conductor DC resistance 20 °C 38 O/km
€299,00
-
Jablotron JA-110I BUS section / output PG activation indicator
Jablotron JA-110I BUS section / output PG activation indicatorThe Jablotron JA-110I BUS section / output PG activation indicator indicates activation of a zone (SET) or of a PG output (1-32) by a red LED.It is connected to the exchange by a BUS. It is not possible to assign him a zone. (it does not occupy a position in the alarm system.• LED ON power consumption: 5 mA• LED OFF power consumption: 2 mA
€40,11
-
Jablotron JA-192PL-A Multifunctional installation box
Jablotron JA-192PL-A Multifunctional installation box The Jablotron JA-192PL-A Multifunctional installation box for outdoor use.Product Info
€17,33
-
Jablotron JA-111I Universal LED indicator RGB
Jablotron JA-111I Universal LED indicator RGB The Jablotron JA-111I Universal LED indicator RGB indicates activation of a zone (SET) or of a PG output (1-32) by a multi-colored LED (red, green, blue and yellow). Product Info
€24,78
-
Jablotron BP-12-18 power module (formerly JA-83PWR)
Jablotron BP-12-18 power module (formerly JA-83PWR)Separate JA-83PWR power module, for the JA-83K central unit from Jablotron.BP-12-18 power module (formerly JA-83PWR)
€169,00
-
Jablotron JA-120Z BUS extender 500m
JA-120Z BUS extender 500m Suitable for current stimulation of the bus, extension of the line length and galvanic isolation of the bus.The JA-120Z extends the BUS line by no less than 500m per terminal. 3 modules can be placed in series, allowing a total of 2000m to be bridged. The kit consists of: a circuit board for the JA-120Z module and a JA-83PWR power source. The backup battery and plastic housing must be purchased separately.* Output current max. 2A* 2 independent bus output terminals – each provides 500 m bus lengthThe product is offered as an electronic module with power supply unit JA-83PWR. We recommend installing the product in a plastic housing PLV-CP-L. The product is a component of the JABLOTRON 100 system, is addressable and occupies one position in the system.* The galvanic isolation of the output terminals serves for different ground potentials and the protective insulation of the bus* Up to 3 boosters can be arranged in series* Backup battery up to 18 Ah
€557,27
-
Jablotron JA-110Z-C BUS connection module
Jablotron JA-110Z-C BUS connection moduleThe Jablotron JA-110Z-C BUS connection module is designed to join BUS wires in the JA-100 system and can be installed in the JA-190PL housing.Product Info
€9,51
-
Jablotron JA-190Y GSM dialer
Jablotron JA-190Y GSM dialer The GSM communicator module is designed for the JA-100K and JA-100KR alarm control panels. It serves as a backup and extension of the LAN communicator, which is part of the control panel. When installed, it increases the reliability of data transfer to the JABLOTRON CLOUD and to the monitoring stationThe JA-190Y communicator makes it possible:– To operate the system via a voice menu– To report events directly to a mobile phone (SMS and voice messages) from the control panel
€408,71
-
Jablotron JA-111R Radio module
Jablotron JA-111R Radio module The radio bus module JA-111R is used to connect all wireless devices of the JABLOTRON 100 system. To perfectly cover the monitored area, up to 3 JA-111R modules can be installed in a system.The electronic unit is installed in the front part of the lid and is equipped with a retractable terminal board, which allows easy connection of the cables. In the rear part there are breakable holes for cables.The module communicates with the control panel bus and is powered by this bus. The module is designed for mounting outside the control panel and is used as the second or third panel in the system. If you need a radio module in the control panel, we recommend that you purchase a control panel with a radio module - the unit JA-10xKR-xxCompatible with: F-Link 1.4.0 or higherPower supply: via the control panel bus: 12 V (9…15 V)Consumption of backup (standby) mode: 25 mACurrent consumption (maximum) for cable selection: 25 mACommunication frequency: 868.1 MHzDimensions: 43 x 160 x 23 mm Classification: safety grade 2, In accordance with EN 50131-1, EN 50131-3Environment: II. indoor, general, in accordance with EN 50131-1Operating temperature range: -10 °C to +40 °CThis also meets the requirements of: ETSI EN 300 220, EN 50130-4, EN 55022, EN 60950-1Operating conditions: ERC REC 70-03
€331,01
-
Jablotron AWZ-200 Backup power source 2A
Jablotron AWZ-200 Backup power source 2A• Power supply 230 V AC / 50 Hz • Output power 13.3-13.8 V DC• Transformer power 40 VA• Maximum permanent current 2A (with rechargeable battery)• Maximum output current 3A (peak, with rechargeable battery)• Electronic short-circuit protection• Current protection (overload) electronically• Transformer power consumption at rated load 0.32 A• Rechargeable battery capacity 7 Ah / 12 V• Dimensions 205x 235 x 95 mm• Weight without battery 2.9g
€121,85
-
Jablotron JA-150N Wireless power module PG
Jablotron JA-150N Wireless power module PGThe Jablotron JA-150N Wireless power module PG is a wireless PG power module (10 A/230 V AC). It copies the status of a selected PG output from the JA-100 system (PG1 to PG 32).• Power 0.5 W at 230 V AC• Output relay load: 16 A/250 V• 1 PG output: 3 x terminals C, NC, NO• Environment according to EN 50131-1, EN 50131-3: II, internal• Operating temperature -10 to + 40 ° C
€128,11
-
Jablotron JA-193PL-BOX-M Mounting box for Jablotron Designline wireless PIR
Jablotron JA-193PL-BOX-M Mounting box for Jablotron Designline wireless PIRJA-193PL-BOX-M Flush mounting box for Jablotron Designline wireless PIR.
€9,84
-
Jablotron JA-193PL-F-S-G, gray frame for mounting box BUS Designline PIR
Jablotron JA-193PL-F-S-G, gray frame for mounting box BUS Designline PIRJA-193PL-F-S-G, gray frame for mounting box BUS Designline PIR
€3,93
-
Jablotron JA-120N Module for opening the electric locks
Jablotron JA-120N Module for opening the electric locks Batteries are installed in the Jablotron JA-120N module, which provide the initial current impulse for opening the electric locks. JA-120N can be used anywhere, where it is difficult to install an external power source for using electric locks. The module responds to the PG output (freely programmable outputs) of the control panel, or can be activated using a button connected to the IN input (this can optionally be blocked by locking the section). The module is addressable and occupies one position in the system.
€117,53
You have 24 of the 65 products seen