Jablotron alarm system

Show previous products

• 

  View options

  Jablotron TK-34 Orange flash wired

  In stock, delivery time 1 to 3 working days

  Jablotron TK-34 Orange flash wiredThe Jablotron TK-34 wired orange outdoor flash is suitable for both the Oasis and the Profi systems. It can also be connected to the Visonic Powermax Complete and Pro. This flash lamp with orange glass will flash in the event of an emergency, then it will be visible from outside where the alarm goes off. This lamp also has a preventive effect. Power supply: 12 V DC Power consumption: max. 200 mA Operating temperature: -30 °C to +50 °C Operating humidity: 95% 

  Read more less

  In stock, delivery time 1 to 3 working days

  €14,00

  View options

• 

  View options

  Jablotron JS-22 PIR motion detector pet friendly

  In stock, delivery time 1 to 3 working days

  Jablotron JS-22 PIR motion detector pet-friendlyThe Jablotron JS-22 pet-friendly wired detector is intended to detect human body movement within buildings. Using two sensors, the JS-22 provides better immunity against activation by moving pets. The signal is processed by a multiple signal analysis, which ensures excellent sensitivity and high immunity to false alarms. Detection analysis can be adjusted to increase immunity (if installed in a problematic location). The detector distinguishes itself with excellent immunity against high-frequency interference and other unwanted signals. The detector can be installed on a flat wall or in a corner.• Power supply 12 V • Installation height: 1.2 meters above the ground • Detection range: 12 meters • Ambient temperature: -10 to +40 °C • Safety: Class 2 • ETSI EN 300220, EN 50130-4, EN 55022, EN 60950-1

  Read more less

  In stock, delivery time 1 to 3 working days

  €70,00

  View options

• 

  View options

  AlarmsysteemExpert.nl Camera surveillance security sticker

  In stock, delivery time 1 to 3 working days

  Camera surveillance security sticker Inform customers, employees and passers-by of your video surveillance. This professional warning sticker is a deterrent and can therefore prevent a lot of aggravation. The stickers are single-sided and weather resistant.Sticker size: 7 x 5cm

  Read more less

  In stock, delivery time 1 to 3 working days

  €0,99

  View options

• 

  View options

  Jablotron JA-182SH Wireless tilt and shock detector

  In stock, delivery time 1 to 3 working days

  Jablotron JA-182SH Wireless tilt and shock detectorThe Jablotron JA-182SH Wireless tilt and shock detector. Shocks from, among other things, the lifting of doors, windows, etc. from the rebates, caused by intruders who try to force, smash, drill or saw through to gain access to your house (property). The wireless tilt and shock detector has a simple installation procedure and uses digital signal processing. It has a memory of previous shocks. The detector is part of the Jablotron 100 security system and has two adjustable modes. The shock/vibration detection mode from doors, windows, etc. can be used to indicate attempts of this type of violence by reporting a detection to your alarm system. The tilt detection mode can be used to indicate unwanted 'tampering' with the object to which the detector is securely mounted. Consider that the burglar thinks he is smart and disassembles the detector. This can be used for safes, works of art, etc. The detector uses a semiconductor tri-axial accelerometer with digital output. The signal processing guarantees high immunity against false alarms. The detector communicates wirelessly using the 100 protocol and runs on batteries.Product Info

  Read more less

  In stock, delivery time 1 to 3 working days

  €95,11

  View options

• 

  View options

  Jablotron JA-111R Radio module

  In stock, delivery time 1 to 3 working days

  Jablotron JA-111R Radio module The radio bus module JA-111R is used to connect all wireless devices of the JABLOTRON 100 system. To perfectly cover the monitored area, up to 3 JA-111R modules can be installed in a system.The electronic unit is installed in the front part of the lid and is equipped with a retractable terminal board, which allows easy connection of the cables. In the rear part there are breakable holes for cables.The module communicates with the control panel bus and is powered by this bus. The module is designed for mounting outside the control panel and is used as the second or third panel in the system. If you need a radio module in the control panel, we recommend that you purchase a control panel with a radio module - the unit JA-10xKR-xxCompatible with: F-Link 1.4.0 or higherPower supply: via the control panel bus: 12 V (9…15 V)Consumption of backup (standby) mode: 25 mACurrent consumption (maximum) for cable selection: 25 mACommunication frequency: 868.1 MHzDimensions: 43 x 160 x 23 mm Classification: safety grade 2, In accordance with EN 50131-1, EN 50131-3Environment: II. indoor, general, in accordance with EN 50131-1Operating temperature range: -10 °C to +40 °CThis also meets the requirements of: ETSI EN 300 220, EN 50130-4, EN 55022, EN 60950-1Operating conditions: ERC REC 70-03

  Read more less

  In stock, delivery time 1 to 3 working days

  €331,01

  View options

• 

  View options

  Jablotron JB-EXT-TH-R - Wireless outdoor thermometer

  In stock, delivery time 1 to 3 working days

  Jablotron JB-EXT-TH-R - Wireless outdoor thermometer The wireless thermometer can be used in an outdoor environment or in an environment with demanding climatic conditions. A temperature diagram can be drawn in the MyJABLOTRON application, and when a certain temperature is reached, temperature messages or switching of PGs can be set.The thermometer is designed for the control panels of the JABLOTRON 100 system. It measures the internal temperature, or an external temperature sensor (JB-TS-PT1000)JB-EXT-TH-R can be connected with a measuring temperature range of –50 °C to +200 °C. The product comes with two batteries with a total lifespan of up to 10 years.

  Read more less

  In stock, delivery time 1 to 3 working days

  €132,05

  View options

• 

  View options

  Jablotron AWZ-200 Backup power source 2A

  In stock, delivery time 1 to 3 working days

  Jablotron AWZ-200 Backup power source 2A• Power supply 230 V AC / 50 Hz • Output power 13.3-13.8 V DC• Transformer power 40 VA• Maximum permanent current 2A (with rechargeable battery)• Maximum output current 3A (peak, with rechargeable battery)• Electronic short-circuit protection• Current protection (overload) electronically• Transformer power consumption at rated load 0.32 A• Rechargeable battery capacity 7 Ah / 12 V• Dimensions 205x 235 x 95 mm• Weight without battery 2.9g 

  Read more less

  In stock, delivery time 1 to 3 working days

  €121,85

  View options

• 

  View options

  Jablotron SA-200A magnetic contact

  In stock, delivery time 1 to 3 working days

  Jablotron SA-200A magnetic contact The Jablotron SA-200A magnetic contact is a basic contact intended for mounting the magnets.Door closed = normally closed (nc = 1k) Door open = normally open (no = 2k ~ alarm)

  Read more less

  In stock, delivery time 1 to 3 working days

  €4,50

  View options

• 

  View options

  Jablotron JA-150M Wireless magnetic contact with 2 inputs

  In stock, delivery time 1 to 3 working days

  JA-150M Wireless magnetic contact with 2 inputs The JA-150M(B) detector is designed to detect the opening of a window or door. It controls two basic behavior responses: status or pulse responses to the opening. It also contains two inputs IN1 and IN2.In addition to the usual detection, this magnetic contact offers the option of using two independent inputs. For example, it is possible to connect a roller shutter detector or a water overflow detector.Product Info

  Read more less

  In stock, delivery time 1 to 3 working days

  €97,88

  View options

• 

  View options

  Jablotron JA-111H BUS module interface for wired detectors

  In stock, delivery time 1 to 3 working days

  Jablotron JA-111H BUS module interface for wired detectorsThe Jablotron JA-111H BUS module is designed to connect a wired detector to the alarm system.The module communicates and is powered by BUS from the control panel. The module is available as a PCB and can be installed in the wired detector. It offers an NC or a NO input. It allows the user to set a minimum trigger time (0.5s, 1s, 2s, or 5s)• Power supply: via the BUS of the central unit, 12V (9 - 15 V)• Standby power consumption: 2 mA• Maximum standby current consumption of the connected detector: 50 mA• Dimensions: 22 x 27 x 14 mm• Safety class 2 in accordance with EN 50131-1, EN 50131-3• Environment in accordance with EN 50131-1, EN 50131-3: II, indoor• Operating temperature: -10 to 40 °C

  Read more less

  In stock, delivery time 1 to 3 working days

  €39,00

  View options

• 

  View options

  Jablotron JA-150N Wireless power module PG

  In stock, delivery time 1 to 3 working days

  Jablotron JA-150N Wireless power module PGThe Jablotron JA-150N Wireless power module PG is a wireless PG power module (10 A/230 V AC). It copies the status of a selected PG output from the JA-100 system (PG1 to PG 32).• Power 0.5 W at 230 V AC• Output relay load: 16 A/250 V• 1 PG output: 3 x terminals C, NC, NO• Environment according to EN 50131-1, EN 50131-3: II, internal• Operating temperature -10 to + 40 ° C

  Read more less

  In stock, delivery time 1 to 3 working days

  €128,11

  View options

• 

  View options

  Jablotron JA-193PL-BOX-M Mounting box for Jablotron Designline wireless PIR

  In stock, delivery time 1 to 3 working days

  Jablotron JA-193PL-BOX-M Mounting box for Jablotron Designline wireless PIRJA-193PL-BOX-M Flush mounting box for Jablotron Designline wireless PIR.

  Read more less

  In stock, delivery time 1 to 3 working days

  €9,84

  View options

• 

  View options

  Jablotron JA-120PW Bus PIR / MW motion detector

  In stock, delivery time 1 to 3 working days

  Jablotron JA-120PW Bus PIR / MW motion detectorThe Jablotron JA-120PW Bus PIR / MW motion detector is used for human motion detection in a building. Thanks to the combination of movement and microwave detection, the detector has a high alarm detection certainty.When motion is detected in the monitored area, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit, does the detector send an alarm message to the control panel.Product Info

  Read more less

  In stock, delivery time 1 to 3 working days

  €148,55

  View options

• 

  View options

  Jablotron SD test Smoke detector tester

  In stock, delivery time 1 to 3 working days

  Jablotron SD test Smoke detector testerJablotron SD test Smoke detector tester, for manual testing of the smoke detector. With telescopic spout for even smoke distribution.

  Read more less

  In stock, delivery time 1 to 3 working days

  €39,00

  View options

• 

  View options

  Jablotron JA-193PL-F-S-G, gray frame for mounting box BUS Designline PIR

  In stock, delivery time 1 to 3 working days

  Jablotron JA-193PL-F-S-G, gray frame for mounting box BUS Designline PIRJA-193PL-F-S-G, gray frame for mounting box BUS Designline PIR

  Read more less

  In stock, delivery time 1 to 3 working days

  €3,93

  View options

• 

  View options

  Jablotron JA-110C PIR with photo camera

  In stock, delivery time 1 to 3 working days

  Jablotron JA-110C PIR with photo camera   The JA-110C PIR with photo camera is used to take photos of a monitored area and transmit them to the control panel of the JABLOTRON 100 security system. Taking a photo is activated either by the activation of a PG output, or by a request to take a photo from the MyJABLOTRON Web Self-Service, or by another detector (by means of PG activation). This setting is supplemented by an optional function that continuously takes photos and stores them temporarily. They are deleted later if no activation of the detector occurs. If at any time activation of the detector occurs, a number of pre-activation photos are saved and post-activation photos are taken and also stored in memory, with a pre-selected number of photos taken during and after activation of the detector. The camera is equipped with infrared auxiliary lighting. The camera's ambient lighting sensor can activate a PG output in the system (this can be used, for example, to switch on an external IR auxiliary light). The camera is monitored and protected against tampering by means of a tilt detector. For outdoor use, when there is a risk of direct contact, an additional protective housing is recommended. The camera occupies one position in the system. Specifications;Power supply via the control panel bus 12 V (9 - 15 V)Power consumption (idle mode/with additional IR lighting) 15 mA/150 mAPIR detection angle of the camera 75°Range of the additional IR lighting max. 12 metersCamera resolution LQ 320x240; HQ 640x480 pixelsEnvironment according to EN 50131-1, IV. outdoor, generalOperating temperature range -20 to +60°C, max. humidity 75%Ingress protection class IP65Dimensions 155 x 75 x 55 mmClassification level 2 In accordance with EN 50131-1, EN 50131-3In accordance with EN 50130-4, EN 55022, EN 50581

  Read more less

  In stock, delivery time 1 to 3 working days

  €214,97

  View options

• 

  View options

  Jablotron JA-120N Module for opening the electric locks

  In stock, delivery time 1 to 3 working days

  Jablotron JA-120N Module for opening the electric locks Batteries are installed in the Jablotron JA-120N module, which provide the initial current impulse for opening the electric locks. JA-120N can be used anywhere, where it is difficult to install an external power source for using electric locks. The module responds to the PG output (freely programmable outputs) of the control panel, or can be activated using a button connected to the IN input (this can optionally be blocked by locking the section). The module is addressable and occupies one position in the system.

  Read more less

  In stock, delivery time 1 to 3 working days

  €117,53

  View options

• 

  View options

  Jablotron JA-110G-CO Connection module

  In stock, delivery time 1 to 3 working days

  Jablotron JA-110G-CO Connection module  The Jablotron JA-110G-CO Connection Module is a plug-in module intended for direct installation in an autonomous Ei208W or Ei208DW CO detector, which allows the connection of the bus to the JABLOTRON 100 system. Product Info

  Read more less

  In stock, delivery time 1 to 3 working days

  €45,59

  View options

• 

  View options

  Jablotron SA-203 mini door magnet contact

  In stock, delivery time 1 to 3 working days

  Jablotron SA-203 mini door magnet contact The Jablotron SA-203 mini door magnet contact for processing in the smallest corners.

  Read more less

  In stock, delivery time 1 to 3 working days

  €7,85

  View options

• 

  View options

  Jablotron JA-110Z-B BUS connection module

  In stock, delivery time 1 to 3 working days

  Jablotron JA-110Z-B BUS connection moduleThe Jablotron JA-110Z-B BUS connection module is designed to join BUS wires in the JA-100 system and can be installed in the JA-190PL housing.Product Info

  Read more less

  In stock, delivery time 1 to 3 working days

  €12,37

  View options

• 

  View options

  Jablotron JA-151TH Wireless temperature sensor

  In stock, delivery time 1 to 3 working days

  Jablotron JA-151TH Wireless temperature sensor You can know the temperature in the desired environment anytime and anywhere. You can easily protect your cold room, greenhouse or any room where the temperature is of great importance against the wrong temperature. As soon as the temperature is not within the set parameters, you will receive a notification. The completely wireless JA-151th temperature sensor transmits the room temperature to the control panel every 4 minutes. In addition, this data is forwarded to the Jablotron Web Self Service (WSS). From this Web Self-Service you can have notifications sent free of charge by SMS or e-mail (such as when you are connected to the Jablotron Cloud via LAN or GPRS). This allows you to set an interval per sensor with a minimum and maximum temperature.If the temperature is too high or too low, notifications are immediately sent to the set email addresses or telephone numbers. This means you will never be late again if your cooling or heating is not working!Product Info

  Read more less

  In stock, delivery time 1 to 3 working days

  €74,29

  View options

• 

  View options

  Jablotron AC-160-DIN Multifunction relay

  In stock, delivery time 1 to 3 working days

  Jablotron AC-160-DIN Multifunctional relay The Wireless AC-160-DIN Multifunction Relay is a component of the JABLOTRON 100 system, but can also be installed as a stand-alone device without linking to a control panel.It offers a switching contact relay with galvanic isolation and safety for switching 230 V / 16 A current loads. The relay can respond to the status of control panel PG outputs or for the activation of devices of the JA-15x series with uni-directional communication, read directly into the relay. The response can be selected from five modes - the standard NATURAL function (extended copy), IMPULSE, STATUS CHANGE, SWITCH OFF and BLOCK. The relay also has a button for immediate manual status change. Allows you to update the firmware via a USB port. It is designed to be mounted on a DIN rail.

  Read more less

  In stock, delivery time 1 to 3 working days

  €165,06

  View options

• 

  View options

  Jablotron JA-154J MS II, MultiSystem remote control, 4 buttons

  In stock, delivery time 1 to 3 working days

  JA-154J MS II, MultiSystem remote control, 4 buttonsThe MultiSystem remote control provides remote control of the security system, plus various electrical appliances, or the activation of an emergency alarm. Confirmation of the execution of an order is given by means of optical and acoustic feedback. All this also with multiple JABLOTRON 100 systems (e.g. at home and in the office). The remote control can also be registered to an AC-16x ​​type multi-function relay to control the relay in accordance with the selected mode. The device supports two-way communication. It behaves like a segment of the JA-100 code control panel.* The control is equipped with both optical and acoustic indication of the execution of a command.* The operation can be registered on multiple systems or multi-function relays.* It checks the battery status and indicates if the battery is empty.* If a key is held down, an activation is sent every second. This function can be used, for example, to send the impulse from a PG output (e.g. gradual closing of roller blinds).* The sound of the keys can be turned off.* The key lock function.* Extensive settings for double pressing the keys. * The control is a device of the JABLOTRON 100 system, is addressable and occupies one position in the system. 

  Read more less

  In stock, delivery time 1 to 3 working days

  €95,11

  View options

• 

  View options

  Jablotron JA-194J-RE Luxury red tag for Jablotron 100

  In stock, delivery time 1 to 3 working days

  Jablotron JA-194J-RE Luxury red tag for Jablotron 100A versatile access tag for the JABLOTRON 100 system in the form of a key tag.This leather tag works with a unique Jablotron code on the 125 kHz frequency.• 125kHz• Jablotron unique code 

  Read more less

  In stock, delivery time 1 to 3 working days

  €12,37

  View options

Show more products