Jablotron cables and power supplies

Jablotron CC-03 Installation cable for the JABLOTRON 100 system, equipped with an additional pair of wires  The Cable CC-03 is used for easy installation of the bus line for the JABLOTRON 100 system with 2 other pairs of auxiliary conductors. 250 meters, each meter marked in black.The colors of the conductors correspond to the color marking of the bus for JABLOTRON 100 and thus simplify the connection of the bus peripherals of the alarm system. 

Read more less

Jablotron AWZ-300 Backup power source 3AJablotron AWZ-300 Backup power source 3A• Power supply 230 V AC / 50 Hz • Output power 13.3-13.8 V DC• Transformer power 80 VA• Maximum permanent current 3A (with rechargeable battery)• Maximum output current 5A (peak, with rechargeable battery)• Electronic short-circuit protection• Current protection (overload) electronically• Transformer power consumption at rated load 0.38 A• Rechargeable battery capacity 17 Ah / 12 V• Dimensions 237 x 307 x 95 mm• Weight without battery  3.8kg

Read more less

Jablotron CC-01 Installation cable for the JA-100 systemThe Jablotron CC-01 Installation cable for the JA-100 system is designed for easy installation. The colors of the cables are identical to the colors of the terminals. 300 meters of cable and each meter marked in black.• 1 x 2 x 24 AWG (0.5 mm) max. Conductor DC resistance 20 °C 97 O/km• 1 x 2 x 20 AWG (0.8 mm) max. Conductor DC resistance 20 °C 38 O/km

Read more less

Jablotron BP-12-18 power module (formerly JA-83PWR)Separate JA-83PWR power module, for the JA-83K central unit from Jablotron.BP-12-18 power module (formerly JA-83PWR)

Read more less

Jablotron AWZ-200 Backup power source 2A• Power supply 230 V AC / 50 Hz • Output power 13.3-13.8 V DC• Transformer power 40 VA• Maximum permanent current 2A (with rechargeable battery)• Maximum output current 3A (peak, with rechargeable battery)• Electronic short-circuit protection• Current protection (overload) electronically• Transformer power consumption at rated load 0.32 A• Rechargeable battery capacity 7 Ah / 12 V• Dimensions 205x 235 x 95 mm• Weight without battery 2.9g 

Read more less

Jablotron CC-02 Installation cable for the JA-100 systemThe Jablotron CC-02 Installation cable for the JA-100 system is designed for easy installation. The colors of the cables are identical to the colors of the terminals. 300 meters of cable and each meter marked in black.2 x 2 x 24 AWG (0.5 mm) max. Conductor DC resistance 20 °C 97 O/km

Read more less

Alarm cable 4-core 4 x 0.22mm roll 100 m 4 core alarm cable. For installing security systems, Color coding for easy installations 100 meters on roll 4 x 0.22mm. Nominal resistance 94.6 Ohms Flexible security cable 4x0.22 Supplied in box: 100 meters Equipped with tear thread Color code: White, Red, Yellow, Green Cores: 100% copper, tinned Core resistance: 94.6 Ohm/Km Core insulation: PVC TI1 TM1 Jacket: White, PVC Type 6 CPR classification: Eca       

Read more less

Alarm cable 8-wire 8 x 0.22mm roll 100 m 8 core alarm cable (shielded), For installing security systems, Color coding for easy installations 100 meters on roll 8 x 0.22mm. Nominal resistance 94.6 Ohms   

Read more less

Jablotron Alarm Cable AC-6-001 per meter Jablotron Alarm Cable AC-6-001 per meter installation cable for alarm systems per meter.6 core alarm cable (unshielded), For installing security systems, Color coding for easy installations, per meter Specifications: Cable: 6 color wires Conductors: stranded copper 7 x 0.18 mm Max. voltage: 60 Vrms Max. current : 1 A per core Max. resistance: 92.4 ?/km Max. temperature: 70°C Insulation: 0.2 mm PVC Jacket: 0.5 mm PVC   

Read more less

Jablotron DE06-12 Power supply12V / 0.5A The Jablotron DE06-12 Power Supply12V / 0.5A is intended for powering wireless control panels and also for powering other 12V DC devices such as intercom outdoor stations, electric strike plate, IP and Analog 12volt cameras The compact dimensions of the housing allow the module to be placed in a standard electrical installation box for concealed installation under wall-mounted Jablotron products, such as the elements mentioned above. The screw holes for M3 screws are also useful for installation in typical fuse/switches where mounting is required.• supply voltage 100 ~ 240VAC, class protection II• output voltage 12V DC (± 2%)• output current 500 mA• peak output current T • output power 12W max.• protection against short circuit and overload• housing IP64• dimensions 50x48x25 mm• input cables length 110 mm (230 V), diameter 1.3 mm (16 AWG)• operating conditions according to EN 50131-1 II. environmental class• working temperature -10 ° C to +40 ° C• complies with EN 50130-4, EN 55022, EN 60950-1

Read more less