Jablotron fire, gas and carbon monoxide detectors

JA-150G-CO Wireless module for Ei208W CO detector The JA-150G-CO is a plug-in module for direct installation in an autonomous CO detector, which enables wireless connection to the JABLOTRON 100 system. This transmits the alarm information, detector activation and detector battery status to the control panel.He occupies one position in the system. Thanks to this print you can wirelessly connect the CO detector in the building with the Jablotron 100 system.The PCB fits easily into the housing and can use the CO detector's battery for power. Product Info 

Read more less

Jablotron Ei208W stand-alone CO detectorThis CO detector can be connected to the Jablotron 100 using: the JA-150G-CO module. The detector is certified for use in buildings, caravans and boats. The detector indicates excessive carbon monoxide concentration both optically with an LED and acoustically using a built-in siren.The detector is powered by an integrated lithium battery.Product Info 

Read more less

Jablotron JA-151ST Wireless fire and heat detector with sirenThe JA-151ST consists of two independent detectors - an optical smoke detector and a heat detector. The optical smoke detector works according to the principle of scattered light. It is very sensitive to large dust particles that are present in dense smoke. It is less sensitive to smaller particles generated by the combustion of liquids such as alcohol. Therefore, the fire detector also contains a built-in heat detector, which reacts more slowly, but is better able to detect a fire that generates only a small amount of smoke.Product Info

Read more less

Ei208DW stand-alone CO detector with displayThis CO detector can be connected to the Jablotron 100 using: the JA-150G-CO module. The detector is certified for use in buildings, caravans and boats. The detector provides excessive carbon monoxide concentration both optically and acoustically with an LED and acoustic signal using a built-in siren. This model also shows the concentration data on the display.The detector is powered by an integrated lithium battery.Product Info 

Read more less

Jablotron JA-150ST Wireless fire and heat detectorThe Jablotron JA-150ST optical wireless smoke and heat detector detects a fire in a building. It allows the user the following settings: Smoke and heat, smoke or heat, heat only and smoke only. It has an alarm memory function so that the LED remains on after an alarm. The JA-150ST is powered by alkaline batteries. It is possible to assign the detector to a zone and it only occupies one position in the alarm system.Product Info

Read more less

Jablotron JA-151ST-A Wireless smoke and heat detector with dual siren function (burglary and fire alarm)The completely wireless smoke and heat detector from Jablotron protects your home and fireplace. The detector is used to detect fire hazards in the interior of residential or commercial buildings. It consists of a siren, which indicates a fire alarm, both from the entire detector and from another fire detector in the system.Unique featuresThe smoke detector has a built-in siren that signals fire and burglar alarms. This message is accepted by all detectors in the system!The detector communicates wirelessly and is powered by batteries (3x 1.5 V AA).If the detector is operated without being assigned to a control panel or if communication with the control panel is lost, it operates in an autonomous mode (EN 14604).The detector optically indicates a dangerous situation with an integrated light and a siren. It is able to acoustically report:– A fire alarm detected by the detector itself– A fire alarm from the system (alarm activated by another fire detector)– Other type of alarm (e.g. burglar alarm)– For alarms reported by the system, sections can be set for which the alarm is indicatedThe product contains two separate detectors – an optical smoke detector and a temperature detector. The optical smoke detector uses the principle of diffuse light. It is very sensitive to particles present in thick smoke. It is less sensitive to small particles produced by burning liquids such as alcohol. That is why a heat detector has been integrated, which responds better to a fire, quickly developing heat with a small amount of smoke.The fire detectors must be installed by an experienced installer with a valid certificate issued by Jablotron. The detector is not designed for installation in industrial environments.Product Info

Read more less