Jablotron glass break detectors

Jablotron JS-25 "COMBO" motion and glass break detector The Jablotron JS-25 COMBO is a two-in-one detector. It is combined with 2 sensors (PIR & glass breaking) in a housing with excellent RF immunity. It provides three independent outputs (PIR alarm, glass break alarm and tamper). The signal from the P.I.R. sensor is electronically analyzed. This ensures that the detector has excellent sensitivity against false alarms and these are essentially eliminated.The dual technology glass break detector analyzes whether air pressure changes and detects sounds of a glass window breaking. The signal processing guarantees high sensitivity to breaking all types of glass.• Power supply: 12 V • Ambient temperature: -10 to +55 °C • Installation height: 2.5 meters above the ground • Safety: Class 2, EN 50131-1 • Detection range of the motion detector: 12 meters • Detection range of the glass break detector: 9 meters

Read more less

Jablotron JA-185B Wireless glass break detector The Jablotron JA-185B Wireless Glass Break Detector is a small size wireless glass break sensor, it detects the breaking of a window. The glass break detector analyzes air pressure changes in combination with sound analysis. It uses digital signal processing to avoid false alarms. It is possible to assign the detector to a zone and it occupies one position in the alarm system. Product Info

Read more less

Jablotron GBT-212 glass break testerThe GBT-212 is designed for testing Jablotron's acoustic glass break detectors. It simulates the sound of glass breaking when an air pressure difference occurs. As a result, both conditions for a glass break detector to go off are met and it will send a signal to the control panel.

Read more less

Jablotron JA-120PB BUS combined PIR motion and glass break detectorThe Jablotron JA-120PB BUS combined PIR motion and glass break detector is suitable for the detection of human movement in a room and for the detection of glass breaking. This detector combines two sensors (PIR motion and acoustic glass breaking) in one housing.The detector occupies two memory positions in the system. The detector uses a PIR sensor for human movement detection. Glass breakage is detected by a sensor GBS, which analyzes changes in pressure and sounds to detect the breaking of a glass window.Product Info

Read more less

Jablotron JA-180PB Wireless PIR and glass break detectorThe Jablotron JA-180PB wireless PIR and glass break detector combines the JA-180P PIR motion detector with a glass break detector in one housing. Both detectors are registered separately in the control panel. The dual glass break detector responds to air pressure changes and responds to the sound of glass breaking, giving this detector a high immunity to false alarms. The detection properties can be adjusted using lenses such as: JS-7904 corridor lens, JS-7906 horizontal pet lens and the JS-7901 vertical curtain lens. It is possible to assign the detector to a zone and it therefore occupies two positions in the system.Product Info

Read more less

Jablotron JA-180B Glass Break Detector This JA-180B glass break detector is used to detect the breaking of glass windows and glass surfaces in buildings. The detector responds to the change in air pressure combined with the characteristic sound of breaking glass.This solution has a high reliability of glass breakage detection. The detection sensitivity can be easily adjusted to the distance and dimensions of the windows to be protected. The detector has a high immunity against RF jamming and other signals with negative effects. The decetetor is designed for mounting on a flat surface. Product Info

Read more less

JA-162PB-WH, PIR motion detector with wireless glass break sensor This device is part of the JABLOTRON system. It is used for the detection of movement in the interior of buildings and for the detection of breaking windows. This detector combines two sensors (PIR motion and BMS acoustics) in one housing. The detector occupies two positions in the system. Specifications: Nutrition 2x Lithium battery CR123A (3.0 V/1.5 Ah) Warning batteries are not included. Battery life approx. 3 years Low battery voltage Nominal current draw 50 uA Maximum current draw 50 mA Communication tape 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) RF range 500 m (open area) Recommended installation height 2.5 m above the floor PIR detection angle/range 90°/12 m BMS detection angle/range 90°/9 m Dimensions 150 x 63 x 40mm Weight (without batteries) 135 g Classification Security class 2/Environmental class II (according to EN 50131-1) General environment General Operating temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification body Trezor Test s.r.o. (no. 3025) In accordance with ETSI EN 300 220-1.2, EN 50130-4, EN 55032, EN IEC 62368-1, EN IEC 63000, EN 50131-1, EN 50131-2-2, EN 50131-2-7-1, EN 50131-5-3, EN 50131-6 Can be operated according to ERC REC 70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)

Read more less

JA-162PB-AN, Motion detector PIR with glass break sensor wireless anthracite This device is part of the JABLOTRON system. It is used for the detection of movement in the interior of buildings and for the detection of breaking windows. This detector combines two sensors (PIR motion and BMS acoustics) in one housing. The detector occupies two positions in the system. Specifications: Nutrition 2x Lithium battery CR123A (3.0 V/1.5 Ah) Warning batteries are not included. Battery life approx. 3 years Low battery voltage Nominal current draw 50 uA Maximum current draw 50 mA Communication tape 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) RF range 500 m (open area) Recommended installation height 2.5 m above the floor PIR detection angle/range 90°/12 m BMS detection angle/range 90°/9 m Dimensions 150 x 63 x 40mm Weight (without batteries) 135 g Classification Security class 2/Environmental class II (according to EN 50131-1) General environment General Operating temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification body Trezor Test s.r.o. (no. 3025) In accordance with ETSI EN 300 220-1.2, EN 50130-4, EN 55032, EN IEC 62368-1, EN IEC 63000, EN 50131-1, EN 50131-2-2, EN 50131-2-7-1, EN 50131-5-3, EN 50131-6 Can be operated according to ERC REC 70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)

Read more less

JA-162PB-GR, PIR motion detector with wireless glass break sensor, Gray This device is part of the JABLOTRON system. It is used for the detection of movement in the interior of buildings and for the detection of breaking windows. This detector combines two sensors (PIR motion and BMS acoustics) in one housing. The detector occupies two positions in the system. Specifications: Nutrition 2x Lithium battery CR123A (3.0 V/1.5 Ah) Warning batteries are not included. Battery life approx. 3 years Low battery voltage Nominal current draw 50 uA Maximum current draw 50 mA Communication tape 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) RF range 500 m (open area) Recommended installation height 2.5 m above the floor PIR detection angle/range 90°/12 m BMS detection angle/range 90°/9 m Dimensions 150 x 63 x 40mm Weight (without batteries) 135 g Classification Security class 2/Environmental class II (according to EN 50131-1) General environment General Operating temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification body Trezor Test s.r.o. (no. 3025) In accordance with ETSI EN 300 220-1.2, EN 50130-4, EN 55032, EN IEC 62368-1, EN IEC 63000, EN 50131-1, EN 50131-2-2, EN 50131-2-7-1, EN 50131-5-3, EN 50131-6 Can be operated according to ERC REC 70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)

Read more less