Jablotron motion detectors

Jablotron JA-161PW Wireless PIR and MW detection The Jablotron JA-161PW Wireless PIR and MW detection is designed to detect human body movement within a building. It works with the JA-102, JA-103 and the JA-107. By using the combination of motion and microwave detection, the detector is highly resistant to false alarms. When motion is detected by the PIR detector, the MW detector will be activated to confirm the detection of the PIR. After the detection has been confirmed and the MW detector has issued an alarm signal, the detector will send an alarm to the control panel.  Main features: The combination of PIR and MW makes the detector very resistant to false alarms The PIR detects and the MW sensor confirms the detection Compatible with JA-102K, JA-103K, JA-107K and JA-152KRY Recommended installation height is 2.5 meters PIR detection angle: 110 degrees PIR detection coverage: 12 meters MW sensor detection angle: 90 degrees PIR detection coverage: 12 meters Dimensions: 60mm x 98mm x 52mm Classification: security class 2 and environmental class II    

Read more less

Jablotron JA-160PC Wireless PIR motion detector with built-in photo cameraThe Jablotron JA-160PC Wireless PIR motion detector with built-in photo camera.The camera takes color photos with a resolution of up to 640 x 480 pixels by detecting human movement while the system is turned on. The camera is equipped with a visible flash for taking photos in the dark. The images are stored in the internal memory of the detector and then they are transmitted to the control panel. From the control panel they can be sent to an external storage device, monitoring station and a user. The detector can also take a photo on command if it is necessary (e.g. fire alarm confirmation).Product Info

Read more less

Jablotron JA-186P Wireless DUAL PIR indoor detectorThe Jablotron JA-186P Wireless DUAL PIR indoor detector is designed to detect human body movement within a building. The dual zone detection ensures that the detector has a high immunity against moving pets. The detector is powered by batteries and communicates via the Jablotron wireless protocol. The installation height of the detector is approximately 120 cm above the ground. The detector has two detection zones, each with a detection angle of 120° and a range of 12 meters. The imaginary dividing line between the two zones is determined by the installation height. It is possible to assign the detector to a zone and it only occupies one position in the alarm system.Product Info

Read more less

Jablotron JA-150P Wireless mini PIRThe Jablotron JA-150P is a PIR motion detector designed for indoor protection. It detects movement with a human body temperature. The detection properties can be adjusted through the use of lenses such as: JS-7904 corridor lens, JS-7906 horizontal PET lens and the JS-7901 vertical curtain lens. The immunity level is adjustable and has two different levels. It is powered by two alkaline batteries. Implemented SMARTWATCH function for improved alarm reporting and energy saving for battery life. It is possible to assign the detector to a zone and it only occupies one position in the alarm system.Product Info

Read more less

Jablotron JA-185P Wireless ceiling PIR detectorThe Jablotron JA-185P Wireless Ceiling PIR Detector is a small wireless PIR detector suitable for protecting small spaces or cars. It is designed to be installed on the ceiling. It uses a digital signal processor to prevent false alarms.Disable supervision if you install it in the car, otherwise it will give an alarm if the sensor is missing! Product Info

Read more less

Jablotron JA-151P-WG, DesignLine Wireless PIR with white-light protection The new PIR detectors of the JABLOTRON 100 series present the result of very high quality design goals. With their shape they will fit aesthetically even in the most luxurious interiors. In addition to their clean appearance, the new PIR detectors offer a wide range of installation options. In addition to standard positioning in a corner of a room, they can be installed on a wall surface using a JA-193PL holder with an aesthetic frame, where the detector is partially recessed and forms a harmonious, elegant whole with the wall. The holder is designed for mounting on plasterboard or brick walls. It is available in sizes S or M (for different detector sizes) and in two color versions - white and gray.The JA-191PL hinged holder provides a solution for special applications such as mounting on the ceiling or on a wall with a specific detector slope. The holder is a certified accessory of the new design series PIR detectors and is supplied with a tamper contact, which can be connected to a connector in the detector.The guaranteed detection coverage of the PIR detectors of the new design is 90 ° / 12 m. In addition, the version with a gray lens with its resistance to white light significantly exceeds the values ​​prescribed by the standard, which helps to reduce false alarms caused, for example, when lighting cars through the windows.The new design range of PIR detectors and their accessories meets the design and aesthetic requirements of even the most demanding customer. These features, together with their great versatility and ease of installation, put these products in a whole new class. Product Info

Read more less

Jablotron JA-180PB Wireless PIR and glass break detectorThe Jablotron JA-180PB wireless PIR and glass break detector combines the JA-180P PIR motion detector with a glass break detector in one housing. Both detectors are registered separately in the control panel. The dual glass break detector responds to air pressure changes and responds to the sound of glass breaking, giving this detector a high immunity to false alarms. The detection properties can be adjusted using lenses such as: JS-7904 corridor lens, JS-7906 horizontal pet lens and the JS-7901 vertical curtain lens. It is possible to assign the detector to a zone and it therefore occupies two positions in the system.Product Info

Read more less

Jablotron JA-152PG, Pro DesignLine Wireless PIR with white-light protection The product is a wireless system device for the Midway Pro and Essex Pro. This detector is designed to detect human body movements in buildings. The guaranteed detection coverage is 90° / 12 m. The gray lens option has a resistance to white light that is significantly higher than the values ​​prescribed in the standard. The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors.White light resistance helps reduce false alarms caused by window illumination, lightning or reflective objects. The detector offers standard resistance to white light, which significantly exceeds the values ​​prescribed by the standard (up to 10,000 lux). The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors in all installation versions. In addition to standard positioning in a corner of a room, it can be installed on a wall surface using an aesthetic mounting box JA-196PL-S, where the detector is partially recessed and forms an elegant whole with the wall. The hinge holder JA-191PL can be used for special applications such as ceiling mounting or oblique detection angle. The detector is equipped with impulse activation. The detector can be used to control programmable PG outputs. Compatible with F-Link 2.0.0 and higher Power source 1x lithium battery, CR123A (3 V / 1500 mAh) Typical lifespan 4 years (in Smartwatch mode) Communication frequency 868.1MHz Communication range approx. 300 m (free terrain) Recommended installation height 2.2 – 2.5 m above floor level Detection angle / detection range 90° / 12 m Sizes: 62 x 110 x 40mm Classification safety level 2/environmental class II, in accordance with EN 50131-1 ed. 2+A1+A2, EN 50131-2-2 Environment according to EN 50131-1 II. indoor, general Operational temperature range -10 °C to +40 °C This also meets the requirements of EN 50131-5-3+A1, EN 50131-6 ed. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581

Read more less

Jablotron JA-152P, Pro Designline Wireless PIRThe product is a wireless system device for the Jablotron Midway Pro and Essex Pro. This detector is designed to detect human body movements in buildings. Its guaranteed detection coverage is 90°/12 m. The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors. In addition to standard positioning in a corner of a room, it can be installed on a wall surface using a mounting box JA-196PL-S, where the detector is partially recessed and forms an elegant whole with the wall. The hinge holder JA-191PL can be used for special applications such as ceiling mounting or oblique detection angle. The detector is equipped with impulse activation. The detector can be used to control programmable PG outputs. False alarm resistance can be set to two levels. The detector offers standard resistance to white light at the level prescribed by the standard (up to 6000 lux). The detector is addressable and occupies one position in the security system.   Compatible with F-Link 2.0.0 and higher Power source 1x lithium battery, CR123A (3 V / 1500 mAh) Typical lifespan 4 years (in Smartwatch mode) Communication frequency 868.1MHz Communication range approx. 300 m (free terrain) Recommended installation height 2.2 – 2.5 m above floor level Detection angle / detection range 90° / 12 m Sizes: 62 x 110 x 40mm Classification safety level 2/environmental class II, in accordance with EN 50131-1 ed. 2+A1+A2, EN 50131-2-2 Environment according to EN 50131-1 II. indoor, general Operational temperature range -10 °C to +40 °C This also meets the requirements of EN 50131-5-3+A1, EN 50131-6 ed. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581

Read more less

Jablotron JA-150P Pro wireless P.I.R. animal friendlyKey features: The product is a wireless system device for the Midway Pro and Essex Pro This detector is designed to detect human body movements in buildings The detector eliminates the movement of small animals on the floor (up to approximately 25 kg and a maximum height of 40 cm at a distance of up to 7 meters from the detector) The detector has a pulse response and occupies one position in the system The JS-7910 lens is only used for the standard immunity level The detector is equipped with an animal lens JS-7910 with an angle of 90°/12 m Product Info

Read more less

JA-162PW | Wireless Designline | Dual MW PIR | This product is a wireless device of the JABLOTRON 100+ system. This detector is designed to detect human body movements in buildings. High immunity against false alarms is achieved thanks to the combination of PIR and microwave (MW) detection. The detector works like a classic PIR detector, but if the PIR detects movement in a monitored area, the MW part activates and confirms the previous PIR activation. Specifications: Power supply 2x lithium battery, type: CR123A (3 V/1500 mAh)Please note: Batteries are not included. Typical battery life 4 years LowBatt status Quiescent current consumption 65 μA Maximum power consumption 50mA Communication tape 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) 25mW Communication range approx. 300 m (open area) Recommended installation height 2.2 – 2.5 m above floor level PIR detection angle/detection coverage 90°/12 meters Detection angle/detection coverage MW 80°/12 meters Operational frequency MW 24.125GHz Maximum radio frequency power (ERP) 30mW Dimensions 63x150x40mm Weight (without batteries) 125 grams Classification Safety class 2/Environmental class II (according to EN 50131-1) Operating temperature range -10 °C to +40 °C Average operating humidity 75% RH, without condensation Certification Body Trezor Test sro (no. 3025) In accordance with ETSI EN 300 220-1,-2, ETSI EN 300 440, EN 50130-4, EN 55032, EN 62368-1, EN 50581, EN 50131-1, EN 50131-2-4, EN 50131-5-3, EN 50131-6 Operating conditions according to general authorization ERC REC 70-03  

Read more less

JA-152P-AN, Wireless motion detector PIR Anthracite NOTE: Only works on the Midway Pro and Essex Pro and Mercury The product is a wireless system device for the JABLOTRON 100+. It is designed to detect human body movements in buildings. The guaranteed detection coverage is 90°/12 m. The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors. Specifications: Compatible with F-Link 2.0.0 and higher Current 1 Lithium battery type CR123A (3 V/1500 mAh)Please note: Battery not included Typical battery life 4 years (longest in smartwatch mode, at 20°C) Low battery voltage Power consumption in standby mode 30 μA Maximum power consumption 100mA Communication tape 868.1 MHz, JABLOTRON protocol Communication range approx. 300 m (open area) Recommended installation height 2.2 – 2.5 m above the floor Detection angle/detection coverage 90°/12 meters Dimensions 62x110x40mm Weight (without battery) 90 grams Classification Safety class 2/Environmental class II (according to EN 50131-1) Operational environment In general Operational temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification Body Trezor Test sro (no. 3025) Matches EN 50131-1 edition. 2+A1+A2, EN 50131-2-2, EN 50131-5-3+A1, EN 50131-6 edition. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 edition. 2+A1, EN 55032, EN 62368-1, EN 50581 Can be operated according to ERC REC 70-30

Read more less

JA-162PC-AN, Wireless motion detector with photo camera Anthracite This device is a wireless part of the JABLOTRON system. It serves for the detection of human movements in the interior of buildings and visual alarm confirmation. The camera takes color photos with a resolution of up to 640x480 pixels. The camera is equipped with a visible flash to take photos in the dark. The images are stored in the internal memory of the detector and are then transferred to the control panel and from the control panel they can be sent to MyJABLOTRON or ARC. The detector can also take a photo on request. The detector occupies one position in the system and must be installed by a trained technician with a valid certificate issued by an authorized distributor. The photo verification can only be used after registering the system with MyJABLOTRON or with a subsequent ARC service. This device is compatible with control panels JA-103K, JA-107K, JA-102K and higher models. Specifications: Current 2x lithium battery type CR123A 3 V/1.5 Ah Typical battery life about 2 years (1 activation and 1 series of photos per day)Please note: batteries are not included LowBatt voltage ≤2.8V Quiescent current consumption 90 µA Maximum power consumption 700mA Communication frequency 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) 11mW Communication range approx. 300 m (unrestricted area) Recommended installation height 2.5 m above the floor PIR detection angle/detection coverage 90°/12 meters Horizontal camera shooting angle 90° Range of the flash maximum 3 meters Camera resolution LQ 320x240; HQ 640 x 480 pixels Photo format LQ/HQ 5–20 KB/5–64 KB Typical (LQ) photo transmission time to the control panel up to 20 s (10 s) Typical (HQ) photo transmission time to the control panel up to 130 s (60 s) Typical time for transferring photos to the server 15 seconds/GPRS; 2 seconds/LAN Dimensions, weight (without batteries) 150 x 65 x 44 mm, 130 grams Operational temperature range -10 °C to +40 °C Operational environment In general Average operational humidity 75% RH, without condensation Classification Safety class 2/Environmental class II (EN 50131-1) Certification Body Trezor Test No. 3025 Matches EN 50131-1, EN 50131-2-2, EN 50131-5-3, EN 50131-6, EN 55032, ETSI EN 300 220-1,-2, EN 62368-1, EN IEC 63000 Can be operated according to ERC/REC-70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)

Read more less

JA-162PC, Wireless motion detector with photo camera This device is a wireless part of the JABLOTRON system. It serves for the detection of human movements in the interior of buildings and visual alarm confirmation. The camera takes color photos with a resolution of up to 640x480 pixels. The camera is equipped with a visible flash to take photos in the dark. The images are stored in the internal memory of the detector and are then transferred to the control panel and from the control panel they can be sent to MyJABLOTRON or ARC. The detector can also take a photo on request. The detector occupies one position in the system and must be installed by a trained technician with a valid certificate issued by an authorized distributor. The photo verification can only be used after registering the system with MyJABLOTRON or with a subsequent ARC service. This device is compatible with control panels JA-103K, JA-107K, JA-102K and higher models. Specifications: Current 2x lithium battery type CR123A 3 V/1.5 Ah Typical battery life about 2 years (1 activation and 1 series of photos per day)Please note: batteries are not included LowBatt voltage ≤2.8V Quiescent current consumption 90 µA Maximum power consumption 700mA Communication frequency 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) 11mW Communication range approx. 300 m (unrestricted area) Recommended installation height 2.5 m above the floor PIR detection angle/detection coverage 90°/12 meters Horizontal camera shooting angle 90° Range of the flash maximum 3 meters Camera resolution LQ 320x240; HQ 640 x 480 pixels Photo format LQ/HQ 5–20 KB/5–64 KB Typical (LQ) photo transmission time to the control panel up to 20 s (10 s) Typical (HQ) photo transmission time to the control panel up to 130 s (60 s) Typical time for transferring photos to the server 15 seconds/GPRS; 2 seconds/LAN Dimensions, weight (without batteries) 150 x 65 x 44 mm, 130 grams Operational temperature range -10 °C to +40 °C Operational environment In general Average operational humidity 75% RH, without condensation Classification Safety class 2/Environmental class II (EN 50131-1) Certification Body Trezor Test No. 3025 Matches EN 50131-1, EN 50131-2-2, EN 50131-5-3, EN 50131-6, EN 55032, ETSI EN 300 220-1,-2, EN 62368-1, EN IEC 63000 Can be operated according to ERC/REC-70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)

Read more less

JA-155P, motion detector PIR Ceiling This detector is designed to detect human body movements in buildingsThe product is installed on the ceiling and its guaranteed detection range is 360° with a recording radius of up to 5.5 m at a mounting height of 3.5 mFalse alarm resistance can be set to two levelsThe detector has a pulse response and occupies one position in the system Attention!! Only works on the JA-103 and JA-107 control panelsSpecifications: Power 2x lithium batteries, type CR123A (3 V/1500 mAh)Warning: batteries are not included. Number of batteries 1x CR123A 2x CR123A Lifetime (Smartwatch mode) 2 years 4 years Low battery voltage Communication band 868.1 MHz, JABLOTRON protocol RF range up to 300 m (open area) Recommended installation height 2.5 – 3.5 m above the ground level Detection coverage 360°/11 m (installation height – 3.5 m) Dimensions Ø 125 x 40 mm Weight (without batteries) 124g Classification security grade 2/II. Indoor general (according to EN 50131-1) Operational environment indoor general Operational temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification body Trezor Test s.r.o. (no. 3025) Complies with EN 50131-1 ed. 2+A1+A2, EN 50131-2-2, EN 50131-5-3+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581 Can be operated according to ERC REC 70-03  

Read more less

JA-162PB-WH, PIR motion detector with wireless glass break sensor This device is part of the JABLOTRON system. It is used for the detection of movement in the interior of buildings and for the detection of breaking windows. This detector combines two sensors (PIR motion and BMS acoustics) in one housing. The detector occupies two positions in the system. Specifications: Nutrition 2x Lithium battery CR123A (3.0 V/1.5 Ah) Warning batteries are not included. Battery life approx. 3 years Low battery voltage Nominal current draw 50 uA Maximum current draw 50 mA Communication tape 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) RF range 500 m (open area) Recommended installation height 2.5 m above the floor PIR detection angle/range 90°/12 m BMS detection angle/range 90°/9 m Dimensions 150 x 63 x 40mm Weight (without batteries) 135 g Classification Security class 2/Environmental class II (according to EN 50131-1) General environment General Operating temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification body Trezor Test s.r.o. (no. 3025) In accordance with ETSI EN 300 220-1.2, EN 50130-4, EN 55032, EN IEC 62368-1, EN IEC 63000, EN 50131-1, EN 50131-2-2, EN 50131-2-7-1, EN 50131-5-3, EN 50131-6 Can be operated according to ERC REC 70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)

Read more less

JA-162PB-AN, Motion detector PIR with glass break sensor wireless anthracite This device is part of the JABLOTRON system. It is used for the detection of movement in the interior of buildings and for the detection of breaking windows. This detector combines two sensors (PIR motion and BMS acoustics) in one housing. The detector occupies two positions in the system. Specifications: Nutrition 2x Lithium battery CR123A (3.0 V/1.5 Ah) Warning batteries are not included. Battery life approx. 3 years Low battery voltage Nominal current draw 50 uA Maximum current draw 50 mA Communication tape 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) RF range 500 m (open area) Recommended installation height 2.5 m above the floor PIR detection angle/range 90°/12 m BMS detection angle/range 90°/9 m Dimensions 150 x 63 x 40mm Weight (without batteries) 135 g Classification Security class 2/Environmental class II (according to EN 50131-1) General environment General Operating temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification body Trezor Test s.r.o. (no. 3025) In accordance with ETSI EN 300 220-1.2, EN 50130-4, EN 55032, EN IEC 62368-1, EN IEC 63000, EN 50131-1, EN 50131-2-2, EN 50131-2-7-1, EN 50131-5-3, EN 50131-6 Can be operated according to ERC REC 70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)

Read more less

JA-162PW-AN, Wireless Designline Dual MW PIR anthraciteThis product is a wireless device of the JABLOTRON 100+ system. This detector is designed to detect human body movements in buildings. High immunity against false alarms is achieved thanks to the combination of PIR and microwave (MW) detection. The detector works like a classic PIR detector, but if the PIR detects movement in a monitored area, the MW part activates and confirms the previous PIR activation. Specifications:Power source 2 lithium batteries, type CR123A (3 V/1500 mAh); batteries are not included Typical battery life 4 years Low battery charge Quiescent current consumption 65 μA Maximum power consumption 50mA Communication tape 868.1 MHz, JABLOTRON protocol Maximum MW radio frequency power (Effective Radiated Power – ERP) 25mW Communication range approx. 300 m (open space) Recommended installation height 2.2 – 2.5 m above floor level Detection angle/PIR coverage 90°/12 m Detection angle/MW coverage 80°/12 m MW frequency 24.125 GHz Maximum MW radio frequency power (Effective Radiated Power – ERP) 30 mW Sizes 150 x 63 x 40mm Weight (without batteries) 125 g Classification Safety grade 2/Environmental class II (according to EN 50131-1) Operational temperature range -10 °C to +40 °C Average operational humidity 75% relative humidity, no condensation Certification body Trezor Test s.r.o. (no. 3025) In accordance with ETSI EN 300 440, EN 50130-4, EN 55032, EN 62368-1, EN 50581, EN 50131-1, EN 50131-2-4 Operating conditions according to general authorization ERC REC 70-03    

Read more less

JA-162PB-GR, PIR motion detector with wireless glass break sensor, Gray This device is part of the JABLOTRON system. It is used for the detection of movement in the interior of buildings and for the detection of breaking windows. This detector combines two sensors (PIR motion and BMS acoustics) in one housing. The detector occupies two positions in the system. Specifications: Nutrition 2x Lithium battery CR123A (3.0 V/1.5 Ah) Warning batteries are not included. Battery life approx. 3 years Low battery voltage Nominal current draw 50 uA Maximum current draw 50 mA Communication tape 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) RF range 500 m (open area) Recommended installation height 2.5 m above the floor PIR detection angle/range 90°/12 m BMS detection angle/range 90°/9 m Dimensions 150 x 63 x 40mm Weight (without batteries) 135 g Classification Security class 2/Environmental class II (according to EN 50131-1) General environment General Operating temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification body Trezor Test s.r.o. (no. 3025) In accordance with ETSI EN 300 220-1.2, EN 50130-4, EN 55032, EN IEC 62368-1, EN IEC 63000, EN 50131-1, EN 50131-2-2, EN 50131-2-7-1, EN 50131-5-3, EN 50131-6 Can be operated according to ERC REC 70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)

Read more less

JA-152P-GR, Wireless motion detector PIR Gray NOTE: Only works on the Midway Pro and Essex Pro and Mercury The product is a wireless system device for the JABLOTRON 100+. It is designed to detect human body movements in buildings. The guaranteed detection coverage is 90°/12 m. The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors. Specifications: Compatible with F-Link 2.0.0 and higher Current 1 Lithium battery type CR123A (3 V/1500 mAh)Please note: Battery not included Typical battery life 4 years (longest in smartwatch mode, at 20°C) Low battery voltage Power consumption in standby mode 30 μA Maximum power consumption 100mA Communication tape 868.1 MHz, JABLOTRON protocol Communication range approx. 300 m (open area) Recommended installation height 2.2 – 2.5 m above the floor Detection angle/detection coverage 90°/12 meters Dimensions 62x110x40mm Weight (without battery) 90 grams Classification Safety class 2/Environmental class II (according to EN 50131-1) Operational environment In general Operational temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification Body Trezor Test sro (no. 3025) Matches EN 50131-1 edition. 2+A1+A2, EN 50131-2-2, EN 50131-5-3+A1, EN 50131-6 edition. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 edition. 2+A1, EN 55032, EN 62368-1, EN 50581 Can be operated according to ERC REC 70-30

Read more less

JA-162PC-GR, Wireless motion detector with photo camera Gray This device is a wireless part of the JABLOTRON system. It serves for the detection of human movements in the interior of buildings and visual alarm confirmation. The camera takes color photos with a resolution of up to 640x480 pixels. The camera is equipped with a visible flash to take photos in the dark. The images are stored in the internal memory of the detector and are then transferred to the control panel and from the control panel they can be sent to MyJABLOTRON or ARC. The detector can also take a photo on request. The detector occupies one position in the system and must be installed by a trained technician with a valid certificate issued by an authorized distributor. The photo verification can only be used after registering the system with MyJABLOTRON or with a subsequent ARC service. This device is compatible with control panels JA-103K, JA-107K, JA-102K and higher models. Specifications: Current 2x lithium battery type CR123A 3 V/1.5 Ah Typical battery life about 2 years (1 activation and 1 series of photos per day)Please note: batteries are not included LowBatt voltage ≤2.8V Quiescent current consumption 90 µA Maximum power consumption 700mA Communication frequency 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) 11mW Communication range approx. 300 m (unrestricted area) Recommended installation height 2.5 m above the floor PIR detection angle/detection coverage 90°/12 meters Horizontal camera shooting angle 90° Range of the flash maximum 3 meters Camera resolution LQ 320x240; HQ 640 x 480 pixels Photo format LQ/HQ 5–20 KB/5–64 KB Typical (LQ) photo transmission time to the control panel up to 20 s (10 s) Typical (HQ) photo transmission time to the control panel up to 130 s (60 s) Typical time for transferring photos to the server 15 seconds/GPRS; 2 seconds/LAN Dimensions, weight (without batteries) 150 x 65 x 44 mm, 130 grams Operational temperature range -10 °C to +40 °C Operational environment In general Average operational humidity 75% RH, without condensation Classification Safety class 2/Environmental class II (EN 50131-1) Certification Body Trezor Test No. 3025 Matches EN 50131-1, EN 50131-2-2, EN 50131-5-3, EN 50131-6, EN 55032, ETSI EN 300 220-1,-2, EN 62368-1, EN IEC 63000 Can be operated according to ERC/REC-70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)

Read more less

JA-162PW-GR, Wireless Designline Dual MW PIR This product is a wireless device of the JABLOTRON 100+ system. This detector is designed to detect human body movements in buildings. High immunity against false alarms is achieved thanks to the combination of PIR and microwave (MW) detection. The detector works like a classic PIR detector, but if the PIR detects movement in a monitored area, the MW part activates and confirms the previous PIR activation. Specifications:Power source 2 lithium batteries, type CR123A (3 V/1500 mAh); batteries are not included Typical battery life 4 years Low battery charge Quiescent current consumption 65 μA Maximum power consumption 50mA Communication tape 868.1 MHz, JABLOTRON protocol Maximum MW radio frequency power (Effective Radiated Power – ERP) 25mW Communication range approx. 300 m (open space) Recommended installation height 2.2 – 2.5 m above floor level Detection angle/PIR coverage 90°/12 m Detection angle/MW coverage 80°/12 m MW frequency 24.125 GHz Maximum MW radio frequency power (Effective Radiated Power – ERP) 30 mW Sizes 150 x 63 x 40mm Weight (without batteries) 125 g Classification Safety grade 2/Environmental class II (according to EN 50131-1) Operational temperature range -10 °C to +40 °C Average operational humidity 75% relative humidity, no condensation Certification body Trezor Test s.r.o. (no. 3025) In accordance with ETSI EN 300 440, EN 50130-4, EN 55032, EN 62368-1, EN 50581, EN 50131-1, EN 50131-2-4 Operating conditions according to general authorization ERC REC 70-03    

Read more less