Jablotron wired detection

Jablotron JA-110F Bus water overflow detectorThe Jablotron JA-110F Bus water overflow detector is used to indicate flooding (in basements, bathrooms, etc.). This information is passed on to the alarm system via the BUS.Product Info

Read more less

Jablotron JA-111MB BUS magnetic detector mini brownThe Jablotron JA-111MB magnetic detector mini is designed for the detection of windows or doorways. It has a unique small design suitable for residential or commercial installations.The module communicates via the digital bus. It is addressable and occupies one memory position in the control panel.Product Info

Read more less

Jablotron JA-120PC Bus PIR motion detector with cameraThe Jablotron JA-120PC Bus PIR motion detector with a color camera that takes color photos with a resolution of up to 640 x 480 pixels.The detector detects movement within the monitored area including a visual alarm confirmation. The detector is equipped with a flash and infrared lighting for taking photos at night. The camera takes digital color photos in JPEG format during an alarm.When movement is detected, the camera takes a series of photos. The photos are stored in the internal memory of the detector and transferred to the control panel in compressed format. From there, the images are transferred outside the building.Product Info

Read more less

Jablotron JA-111M BUS magnetic detector miniThe Jablotron JA-111M magnetic detector mini is designed for the detection of windows or doorways. It has a unique small design suitable for residential or commercial installations.The module communicates via the digital bus. It is addressable and occupies one memory position in the control panel.Product Info

Read more less

Jablotron JA-120PB BUS combined PIR motion and glass break detectorThe Jablotron JA-120PB BUS combined PIR motion and glass break detector is suitable for the detection of human movement in a room and for the detection of glass breaking. This detector combines two sensors (PIR motion and acoustic glass breaking) in one housing.The detector occupies two memory positions in the system. The detector uses a PIR sensor for human movement detection. Glass breakage is detected by a sensor GBS, which analyzes changes in pressure and sounds to detect the breaking of a glass window.Product Info

Read more less

Jablotron Ei208W stand-alone CO detectorThis CO detector can be connected to the Jablotron 100 using: the JA-150G-CO module. The detector is certified for use in buildings, caravans and boats. The detector indicates excessive carbon monoxide concentration both optically with an LED and acoustically using a built-in siren.The detector is powered by an integrated lithium battery.Product Info 

Read more less

Jablotron JA-111SH Bus shock and tilt detectorThe wireless Jablotron JA-111SH Bus shock and tilt detector detects shocks from, among other things, lifting doors, windows, etc., caused by intruders who try to force, smash, drill, or saw through to gain access to your home (property). The wireless tilt and shock detector has a simple installation procedure and uses digital signal processing. It has a memory of previous shocks. The detector is part of the Jablotron 100 security system and has two adjustable modes. The shock/vibration detection mode from doors, windows, etc. can be used to indicate attempts of this type of violence by reporting a detection to your alarm system. The tilt detection mode can be used to indicate unwanted 'tampering' with the object to which the detector is securely mounted. Consider that the burglar thinks he is smart and disassembles the detector. This can be used for safes, works of art, etc. The detector uses a semiconductor tri-axial accelerometer with digital output. The signal processing guarantees high immunity against false alarms. The detector communicates via the BUS.Product Info

Read more less

Ei208DW stand-alone CO detector with displayThis CO detector can be connected to the Jablotron 100 using: the JA-150G-CO module. The detector is certified for use in buildings, caravans and boats. The detector provides excessive carbon monoxide concentration both optically and acoustically with an LED and acoustic signal using a built-in siren. This model also shows the concentration data on the display.The detector is powered by an integrated lithium battery.Product Info 

Read more less

Jablotron JA-112J BUS wall button with panic functionThe bus wall button JA-112j is designed to activate a panic alarm or to control the PG outputs (freely programmable outputs).The JA-112J has two buttons and an indicator LED, which signals activation (lights up red / green) when pressing the button when switching a PG output on or off. This panic/wall switch also has an optional function, namely the delayed activation of the panic alarm (where the activation can be canceled by pressing the button again). Postponing this emergency alarm is signaled by the flashing of the red LED. The JA-112J button is addressable and occupies one position in the system.Product Info

Read more less

Jablotron JA-111H BUS module interface for wired detectorsThe Jablotron JA-111H BUS module is designed to connect a wired detector to the alarm system.The module communicates and is powered by BUS from the control panel. The module is available as a PCB and can be installed in the wired detector. It offers an NC or a NO input. It allows the user to set a minimum trigger time (0.5s, 1s, 2s, or 5s)• Power supply: via the BUS of the central unit, 12V (9 - 15 V)• Standby power consumption: 2 mA• Maximum standby current consumption of the connected detector: 50 mA• Dimensions: 22 x 27 x 14 mm• Safety class 2 in accordance with EN 50131-1, EN 50131-3• Environment in accordance with EN 50131-1, EN 50131-3: II, indoor• Operating temperature: -10 to 40 °C

Read more less

Jablotron JA-120PW Bus PIR / MW motion detectorThe Jablotron JA-120PW Bus PIR / MW motion detector is used for human motion detection in a building. Thanks to the combination of movement and microwave detection, the detector has a high alarm detection certainty.When motion is detected in the monitored area, the MW detector is activated to confirm the triggering of the PIR. Only after receiving a confirmed alarm signal from the MW unit, does the detector send an alarm message to the control panel.Product Info

Read more less

Jablotron JA-110C PIR with photo camera   The JA-110C PIR with photo camera is used to take photos of a monitored area and transmit them to the control panel of the JABLOTRON 100 security system. Taking a photo is activated either by the activation of a PG output, or by a request to take a photo from the MyJABLOTRON Web Self-Service, or by another detector (by means of PG activation). This setting is supplemented by an optional function that continuously takes photos and stores them temporarily. They are deleted later if no activation of the detector occurs. If at any time activation of the detector occurs, a number of pre-activation photos are saved and post-activation photos are taken and also stored in memory, with a pre-selected number of photos taken during and after activation of the detector. The camera is equipped with infrared auxiliary lighting. The camera's ambient lighting sensor can activate a PG output in the system (this can be used, for example, to switch on an external IR auxiliary light). The camera is monitored and protected against tampering by means of a tilt detector. For outdoor use, when there is a risk of direct contact, an additional protective housing is recommended. The camera occupies one position in the system. Specifications;Power supply via the control panel bus 12 V (9 - 15 V)Power consumption (idle mode/with additional IR lighting) 15 mA/150 mAPIR detection angle of the camera 75°Range of the additional IR lighting max. 12 metersCamera resolution LQ 320x240; HQ 640x480 pixelsEnvironment according to EN 50131-1, IV. outdoor, generalOperating temperature range -20 to +60°C, max. humidity 75%Ingress protection class IP65Dimensions 155 x 75 x 55 mmClassification level 2 In accordance with EN 50131-1, EN 50131-3In accordance with EN 50130-4, EN 55022, EN 50581

Read more less

Jablotron JA-110G-CO Connection module  The Jablotron JA-110G-CO Connection Module is a plug-in module intended for direct installation in an autonomous Ei208W or Ei208DW CO detector, which allows the connection of the bus to the JABLOTRON 100 system. Product Info

Read more less

Jablotron GS-208-CO Connection module   The Jablotron GS-208-CO Connection Module is a plug-in module intended for direct integration into the autonomous Ei208W or Ei208DW CO detector, allowing the wired connection of the bus to a protection unit or other system.The module provides galvanic isolation of the wired output of the entire detector. It provides the control panel with information about alarms and detector faults. Product Info

Read more less

Jablotron JA-111H-AD BUS module for system controlThe Jablotron JA-111H-AD BUS system control module is designed to be placed within an external control device (with contact outputs) and provides a power supply for that device. The module has a status response (reports its switching on and off).• Power supply via BUS 12 V (9 ... 15 V)• Power consumption in standby mode * 5 mA• Power consumption for cable selection * 5 mA• Maximum permitted current of the connected control device 50 mA• Dimensions 22 x 27 x 14 mm• Class 2 according to EN 50131-1, EN 50131-3• Operational environment according to EN 50131-1: II. generally indoors• Operating temperature -10 to + 40 ° C• Also complies with EN 50130-4, EN 55022 

Read more less

Jablotron JA-115P Pro Bus PIR motion detector ceilingThe product is a bus system device for the Midway Pro and Essex Pro. This detector is designed to detect human body movements in buildings. Compared to standard motion detectors from the JABLOTRON 100 series, this detector is designed for ceiling mounting. The product is installed on the ceiling and its guaranteed detection range is 360° with a detection radius of up to 5.5 m at a mounting height of 3.5 m. False alarm resistance can be set to two levels. The detector has a pulse response and occupies one position in the system. For automation functions, detection sensitivity can be increased in the activated system state. A circular spacer (PLV-P-ST) has been developed as a certified accessory for ceiling-mounted detectors, allowing the bus cable to be concealed in cases where it cannot be neatly concealed in the ceiling. Product Info

Read more less

Jablotron JA-111ST-A BUS combined smoke and heat detector with fire and burglar siren functionThe product is used to detect fire hazards in the interior of residential and commercial buildings. The detector is not intended for installation in an industrial environment. The detector is powered via the control panel bus. When the detector is used with batteries (3x 1.5 V AA) from which it can be powered, it will continue to function as a standalone detector when the 12 V supply is disconnected (EN 14604).The smoke detector has a built-in siren that signals fire and burglar alarms. This message is accepted by all detectors in the system!The detector indicates fire danger using the built-in LED indicator and acoustic signaling.The JA-111ST-A product consists of two independent detectors – an optical smoke detector and a heat detector. The optical smoke detector works according to the principle of scattered light. It is very sensitive to coarser dust particles present in dense smoke. The product is less sensitive to smaller particles generated by combustion of liquids such as alcohol. That is why the fire detector also contains a built-in heat detector, which reacts more slowly, but is better able to detect a fire that generates only a small amount of smoke.Product Info

Read more less

JA-110P PET, PRO Bus detector Pet ImmuneThe detector eliminates the movement of small animals across the floor (up to approximately 25 kg and a maximum height of 40 cm at a distance of up to 7 meters from the detector).The detector has a pulse response and occupies one position in the system.The JS-7910 lens is only used for the standard immunity level.The detector comes with a JS-7910 animal lens with an angle of 90° / 12 m.Product Info

Read more less

LD-81 | Water overflow detectorKey features:Work environment II. internalOperating temperature range -10 to 40° CAlarm condition Water floodingComplies with EN 50130-4, EN 55022Can be connected directly to the central unit or, for example, with JA-81m

Read more less

Jablotron JA-110P BUS PIR motion detector – ECOThe Jablotron JA-110P is a BUS PIR motion detector designed for indoor protection. It detects the movement of an object with the temperature of the human body. The detection properties can be optimized using alternative lenses, such as the: JS-7904 corridor lens, JS-7906 horizontal pet lens and the JS-7901 vertical curtain lens. The immunity level is adjustable and has two different levels. The alarm memory function is an optional setting, this function makes indication and locating an alarm very easy. It is possible to assign the detector to a zone and it only occupies one position in the alarm system. SMART MEMORY indication (SMI) provides visual LED verification of an activated detector. SMI can be switched off using the code control panel.Product Info

Read more less

Jablotron JA-110ST BUS combined smoke and heat detectorThe Jablotron JA-110ST BUS combined smoke and heat detector detects fire inside a building. The detector has different settings, such as: smoke and heat, smoke or heat, smoke only or heat only. It has an alarm memory function where the LED will still be on after the alarm status has passed. It is possible to assign the detector to a zone and it only occupies one position in the alarm system. SMART MEMORY indication (SMI) provides visual LED verification of an activated detector. SMI can be switched off using the code control panel.Product Info

Read more less

JA-111H TRB connection module wired detectorThe JA-111H TRB module is an innovation of the JA-111H product. The innovation consists of a reduction in dimensions, extension of the connecting wires to 30 cm, the addition of a TRB input and minor changes to the internal settings.The JA-111H TRB module is designed to connect any wired detector (with contact or impulse outputs) to the JABLOTRON 100 system and supply it with power. This built-in module can be integrated directly into the detector. *One input of the module has a fixed tamper signal, the second input reports an alarm signal and the third input is used to report a fault from a connected device or a special "Masking" signal (for detectors with an anti-masking function).*The module can also be used to connect a roller blind detector CT-01.*The module can be used to control programmable PG outputs.*It supports setting a minimum activation time for alarm activation (0.1 s - 300 s). *The detector has both status and impulse activation. *The module is a device of the JABLOTRON 100 system, is addressable and occupies one position in the system.

Read more less

Jablotron SA-220 roller door magnetic contact with floor contact Jablotron SA-220 roller door magnetic contact with floor contact.Wired magnetic contact specially designed for rolling doors, garage doors, etc.   The garage door contact for heavy doors is a magnetic contact that secures larger doors (e.g. garages). Unauthorized opening is detected and reported to the alarm center. The garage door contact for heavy doors is mainly installed on rolling, sliding and tilting doors. The detector consists of a magnetic contact (reed) and a magnet. These are applied parallel to each other. The circuit of an NC opening detector is closed in the rest state. When the distance between reed and magnet increases, the current circuit is interrupted and an alarm signal is given. The detector is protected against tampering. The optimal location for installation is in the center of the driveway. The reed contact is mounted on the ground, the magnet - at a distance of approx. 20 mm - on the inside of the door. The garage door contact for heavy doors is very suitable for surface mounting. It is absolutely waterproof and dustproof (IP 68). Thanks to the extremely robust housing, the detector is resistant to damage from being run over.   Product Info

Read more less