Jablotron wireless detection
Jablotron wireless detection
-
Jablotron JA-152PG, Pro DesignLine Wireless PIR with white-light protection
Jablotron JA-152PG, Pro DesignLine Wireless PIR with white-light protection The product is a wireless system device for the Midway Pro and Essex Pro. This detector is designed to detect human body movements in buildings. The guaranteed detection coverage is 90° / 12 m. The gray lens option has a resistance to white light that is significantly higher than the values prescribed in the standard. The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors.White light resistance helps reduce false alarms caused by window illumination, lightning or reflective objects. The detector offers standard resistance to white light, which significantly exceeds the values prescribed by the standard (up to 10,000 lux). The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors in all installation versions. In addition to standard positioning in a corner of a room, it can be installed on a wall surface using an aesthetic mounting box JA-196PL-S, where the detector is partially recessed and forms an elegant whole with the wall. The hinge holder JA-191PL can be used for special applications such as ceiling mounting or oblique detection angle. The detector is equipped with impulse activation. The detector can be used to control programmable PG outputs. Compatible with F-Link 2.0.0 and higher Power source 1x lithium battery, CR123A (3 V / 1500 mAh) Typical lifespan 4 years (in Smartwatch mode) Communication frequency 868.1MHz Communication range approx. 300 m (free terrain) Recommended installation height 2.2 – 2.5 m above floor level Detection angle / detection range 90° / 12 m Sizes: 62 x 110 x 40mm Classification safety level 2/environmental class II, in accordance with EN 50131-1 ed. 2+A1+A2, EN 50131-2-2 Environment according to EN 50131-1 II. indoor, general Operational temperature range -10 °C to +40 °C This also meets the requirements of EN 50131-5-3+A1, EN 50131-6 ed. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581
€152,90
-
Jablotron JA-151ST-A Wireless smoke and heat detector with dual siren function (burglary and fire alarm)
Jablotron JA-151ST-A Wireless smoke and heat detector with dual siren function (burglary and fire alarm)The completely wireless smoke and heat detector from Jablotron protects your home and fireplace. The detector is used to detect fire hazards in the interior of residential or commercial buildings. It consists of a siren, which indicates a fire alarm, both from the entire detector and from another fire detector in the system.Unique featuresThe smoke detector has a built-in siren that signals fire and burglar alarms. This message is accepted by all detectors in the system!The detector communicates wirelessly and is powered by batteries (3x 1.5 V AA).If the detector is operated without being assigned to a control panel or if communication with the control panel is lost, it operates in an autonomous mode (EN 14604).The detector optically indicates a dangerous situation with an integrated light and a siren. It is able to acoustically report:– A fire alarm detected by the detector itself– A fire alarm from the system (alarm activated by another fire detector)– Other type of alarm (e.g. burglar alarm)– For alarms reported by the system, sections can be set for which the alarm is indicatedThe product contains two separate detectors – an optical smoke detector and a temperature detector. The optical smoke detector uses the principle of diffuse light. It is very sensitive to particles present in thick smoke. It is less sensitive to small particles produced by burning liquids such as alcohol. That is why a heat detector has been integrated, which responds better to a fire, quickly developing heat with a small amount of smoke.The fire detectors must be installed by an experienced installer with a valid certificate issued by Jablotron. The detector is not designed for installation in industrial environments.Product Info
€189,84
-
Jablotron JA-152P, Pro Designline Wireless PIR
Jablotron JA-152P, Pro Designline Wireless PIRThe product is a wireless system device for the Jablotron Midway Pro and Essex Pro. This detector is designed to detect human body movements in buildings. Its guaranteed detection coverage is 90°/12 m. The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors. In addition to standard positioning in a corner of a room, it can be installed on a wall surface using a mounting box JA-196PL-S, where the detector is partially recessed and forms an elegant whole with the wall. The hinge holder JA-191PL can be used for special applications such as ceiling mounting or oblique detection angle. The detector is equipped with impulse activation. The detector can be used to control programmable PG outputs. False alarm resistance can be set to two levels. The detector offers standard resistance to white light at the level prescribed by the standard (up to 6000 lux). The detector is addressable and occupies one position in the security system. Compatible with F-Link 2.0.0 and higher Power source 1x lithium battery, CR123A (3 V / 1500 mAh) Typical lifespan 4 years (in Smartwatch mode) Communication frequency 868.1MHz Communication range approx. 300 m (free terrain) Recommended installation height 2.2 – 2.5 m above floor level Detection angle / detection range 90° / 12 m Sizes: 62 x 110 x 40mm Classification safety level 2/environmental class II, in accordance with EN 50131-1 ed. 2+A1+A2, EN 50131-2-2 Environment according to EN 50131-1 II. indoor, general Operational temperature range -10 °C to +40 °C This also meets the requirements of EN 50131-5-3+A1, EN 50131-6 ed. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581
€133,00
-
Jablotron JA-150P Pro wireless P.I.R. animal friendly
Jablotron JA-150P Pro wireless P.I.R. animal friendlyKey features: The product is a wireless system device for the Midway Pro and Essex Pro This detector is designed to detect human body movements in buildings The detector eliminates the movement of small animals on the floor (up to approximately 25 kg and a maximum height of 40 cm at a distance of up to 7 meters from the detector) The detector has a pulse response and occupies one position in the system The JS-7910 lens is only used for the standard immunity level The detector is equipped with an animal lens JS-7910 with an angle of 90°/12 m Product Info
€141,88
-
Jablotron JA-159J, Pro Wireless Doorbell
JA-159J, Pro Wireless DoorbellKey features: The product is a wireless system device for the Jablotron Midway Pro and Essex Pro Button activation allows you to use the wireless calling function, activate an emergency alarm or control devices The product occupies one position in the system
€59,00
-
Jablotron JA-151M-AN mini magnetic contact anthracite
JA-151M-AN mini magnetic contact light grayThe Jablotron JA-151M-AN Wireless mini magnetic contact is designed to detect the opening of doors and windows. The JA-151M-AN has a unique small design suitable for all types of installations. The magnetic detector is powered by a lithium battery type CR2032. It is possible to assign the detector to a zone and it only occupies one position in the alarm system.Product specifications: Mini Magnetic contact wireless, light gray Communication wirelessly via 868.1 MHz Including LED indication (with flash) Configurable via F-Link Classification: Class-2 'Power supply via 1x CR2032 battery (excl.) Internal use (EN-50131-1) Dimensions: 55 x 16/26 x163mm
€90,75
-
Jablotron JA-150A II Wireless Internal Siren
JA-150A II Wireless Internal SirenAn indoor wireless siren, the JA-150A II is designed for acoustic alarm signaling, entry and exit delays and PG output activation in the security system.Product Info
€173,33
-
Jablotron JA-150MB Wireless Dark Brown Magnetic Contact
JA-150MB Wireless Dark Brown Magnetic Contact Main features: Magnetic contact, color brown Indoor use near windows/doors Communication wirelessly over 868MHz 2x alarm input
€69,00
-
Jablotron JA-162PW | Wireless Designline | Dual MW PIR |
JA-162PW | Wireless Designline | Dual MW PIR | This product is a wireless device of the JABLOTRON 100+ system. This detector is designed to detect human body movements in buildings. High immunity against false alarms is achieved thanks to the combination of PIR and microwave (MW) detection. The detector works like a classic PIR detector, but if the PIR detects movement in a monitored area, the MW part activates and confirms the previous PIR activation. Specifications: Power supply 2x lithium battery, type: CR123A (3 V/1500 mAh)Please note: Batteries are not included. Typical battery life 4 years LowBatt status Quiescent current consumption 65 μA Maximum power consumption 50mA Communication tape 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) 25mW Communication range approx. 300 m (open area) Recommended installation height 2.2 – 2.5 m above floor level PIR detection angle/detection coverage 90°/12 meters Detection angle/detection coverage MW 80°/12 meters Operational frequency MW 24.125GHz Maximum radio frequency power (ERP) 30mW Dimensions 63x150x40mm Weight (without batteries) 125 grams Classification Safety class 2/Environmental class II (according to EN 50131-1) Operating temperature range -10 °C to +40 °C Average operating humidity 75% RH, without condensation Certification Body Trezor Test sro (no. 3025) In accordance with ETSI EN 300 220-1,-2, ETSI EN 300 440, EN 50130-4, EN 55032, EN 62368-1, EN 50581, EN 50131-1, EN 50131-2-4, EN 50131-5-3, EN 50131-6 Operating conditions according to general authorization ERC REC 70-03
€199,35
-
Jablotron JA-152P-AN, Wireless motion detector PIR Anthracite
JA-152P-AN, Wireless motion detector PIR Anthracite NOTE: Only works on the Midway Pro and Essex Pro and Mercury The product is a wireless system device for the JABLOTRON 100+. It is designed to detect human body movements in buildings. The guaranteed detection coverage is 90°/12 m. The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors. Specifications: Compatible with F-Link 2.0.0 and higher Current 1 Lithium battery type CR123A (3 V/1500 mAh)Please note: Battery not included Typical battery life 4 years (longest in smartwatch mode, at 20°C) Low battery voltage Power consumption in standby mode 30 μA Maximum power consumption 100mA Communication tape 868.1 MHz, JABLOTRON protocol Communication range approx. 300 m (open area) Recommended installation height 2.2 – 2.5 m above the floor Detection angle/detection coverage 90°/12 meters Dimensions 62x110x40mm Weight (without battery) 90 grams Classification Safety class 2/Environmental class II (according to EN 50131-1) Operational environment In general Operational temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification Body Trezor Test sro (no. 3025) Matches EN 50131-1 edition. 2+A1+A2, EN 50131-2-2, EN 50131-5-3+A1, EN 50131-6 edition. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 edition. 2+A1, EN 55032, EN 62368-1, EN 50581 Can be operated according to ERC REC 70-30
€168,19
-
Jablotron JA-162PC-AN, Wireless motion detector with photo camera Anthracite
JA-162PC-AN, Wireless motion detector with photo camera Anthracite This device is a wireless part of the JABLOTRON system. It serves for the detection of human movements in the interior of buildings and visual alarm confirmation. The camera takes color photos with a resolution of up to 640x480 pixels. The camera is equipped with a visible flash to take photos in the dark. The images are stored in the internal memory of the detector and are then transferred to the control panel and from the control panel they can be sent to MyJABLOTRON or ARC. The detector can also take a photo on request. The detector occupies one position in the system and must be installed by a trained technician with a valid certificate issued by an authorized distributor. The photo verification can only be used after registering the system with MyJABLOTRON or with a subsequent ARC service. This device is compatible with control panels JA-103K, JA-107K, JA-102K and higher models. Specifications: Current 2x lithium battery type CR123A 3 V/1.5 Ah Typical battery life about 2 years (1 activation and 1 series of photos per day)Please note: batteries are not included LowBatt voltage ≤2.8V Quiescent current consumption 90 µA Maximum power consumption 700mA Communication frequency 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) 11mW Communication range approx. 300 m (unrestricted area) Recommended installation height 2.5 m above the floor PIR detection angle/detection coverage 90°/12 meters Horizontal camera shooting angle 90° Range of the flash maximum 3 meters Camera resolution LQ 320x240; HQ 640 x 480 pixels Photo format LQ/HQ 5–20 KB/5–64 KB Typical (LQ) photo transmission time to the control panel up to 20 s (10 s) Typical (HQ) photo transmission time to the control panel up to 130 s (60 s) Typical time for transferring photos to the server 15 seconds/GPRS; 2 seconds/LAN Dimensions, weight (without batteries) 150 x 65 x 44 mm, 130 grams Operational temperature range -10 °C to +40 °C Operational environment In general Average operational humidity 75% RH, without condensation Classification Safety class 2/Environmental class II (EN 50131-1) Certification Body Trezor Test No. 3025 Matches EN 50131-1, EN 50131-2-2, EN 50131-5-3, EN 50131-6, EN 55032, ETSI EN 300 220-1,-2, EN 62368-1, EN IEC 63000 Can be operated according to ERC/REC-70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)
€365,48
-
Jablotron JA-162PC, Wireless motion detector with photo camera
JA-162PC, Wireless motion detector with photo camera This device is a wireless part of the JABLOTRON system. It serves for the detection of human movements in the interior of buildings and visual alarm confirmation. The camera takes color photos with a resolution of up to 640x480 pixels. The camera is equipped with a visible flash to take photos in the dark. The images are stored in the internal memory of the detector and are then transferred to the control panel and from the control panel they can be sent to MyJABLOTRON or ARC. The detector can also take a photo on request. The detector occupies one position in the system and must be installed by a trained technician with a valid certificate issued by an authorized distributor. The photo verification can only be used after registering the system with MyJABLOTRON or with a subsequent ARC service. This device is compatible with control panels JA-103K, JA-107K, JA-102K and higher models. Specifications: Current 2x lithium battery type CR123A 3 V/1.5 Ah Typical battery life about 2 years (1 activation and 1 series of photos per day)Please note: batteries are not included LowBatt voltage ≤2.8V Quiescent current consumption 90 µA Maximum power consumption 700mA Communication frequency 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) 11mW Communication range approx. 300 m (unrestricted area) Recommended installation height 2.5 m above the floor PIR detection angle/detection coverage 90°/12 meters Horizontal camera shooting angle 90° Range of the flash maximum 3 meters Camera resolution LQ 320x240; HQ 640 x 480 pixels Photo format LQ/HQ 5–20 KB/5–64 KB Typical (LQ) photo transmission time to the control panel up to 20 s (10 s) Typical (HQ) photo transmission time to the control panel up to 130 s (60 s) Typical time for transferring photos to the server 15 seconds/GPRS; 2 seconds/LAN Dimensions, weight (without batteries) 150 x 65 x 44 mm, 130 grams Operational temperature range -10 °C to +40 °C Operational environment In general Average operational humidity 75% RH, without condensation Classification Safety class 2/Environmental class II (EN 50131-1) Certification Body Trezor Test No. 3025 Matches EN 50131-1, EN 50131-2-2, EN 50131-5-3, EN 50131-6, EN 55032, ETSI EN 300 220-1,-2, EN 62368-1, EN IEC 63000 Can be operated according to ERC/REC-70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)
€365,48
-
Jablotron JA-155P, motion detector PIR Ceiling
JA-155P, motion detector PIR Ceiling This detector is designed to detect human body movements in buildingsThe product is installed on the ceiling and its guaranteed detection range is 360° with a recording radius of up to 5.5 m at a mounting height of 3.5 mFalse alarm resistance can be set to two levelsThe detector has a pulse response and occupies one position in the system Attention!! Only works on the JA-103 and JA-107 control panelsSpecifications: Power 2x lithium batteries, type CR123A (3 V/1500 mAh)Warning: batteries are not included. Number of batteries 1x CR123A 2x CR123A Lifetime (Smartwatch mode) 2 years 4 years Low battery voltage Communication band 868.1 MHz, JABLOTRON protocol RF range up to 300 m (open area) Recommended installation height 2.5 – 3.5 m above the ground level Detection coverage 360°/11 m (installation height – 3.5 m) Dimensions Ø 125 x 40 mm Weight (without batteries) 124g Classification security grade 2/II. Indoor general (according to EN 50131-1) Operational environment indoor general Operational temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification body Trezor Test s.r.o. (no. 3025) Complies with EN 50131-1 ed. 2+A1+A2, EN 50131-2-2, EN 50131-5-3+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581 Can be operated according to ERC REC 70-03
€173,33
-
Jablotron JA-152SHM, Shock and tilt detector wireless
JA-152SHM, Shock and tilt detector wireless Attention!! Only suitable for the JA-103 & JA-107 control panels Combined shock or tilt detector with magnetic contact. Responds to vibrations and shocks in shock detection mode. In tilt detection mode, responds to changes in its position.Specifications: Power supply 1x alkaline battery type AA(LR6, 1.5 V / 2.4 Ah) Battery life approx. 2 years Maximum power consumption 80mA Compatibility with control panels JA-103K, JA-107K Communication frequency 868.1 MHz, JABLOTRON protocol Maximum Radio Frequency Output (ERP) 18.2mW Communication range approx. 300 m Environment within general Operational temperature range -10 °C to +40 °C Detector dimensions 24x109x24mm Magnet dimensions 16x55x15mm Weight (without battery) 35 grams
€129,68
-
Jablotron JA-162PW-AN, Wireless Designline Dual MW PIR anthracite
JA-162PW-AN, Wireless Designline Dual MW PIR anthraciteThis product is a wireless device of the JABLOTRON 100+ system. This detector is designed to detect human body movements in buildings. High immunity against false alarms is achieved thanks to the combination of PIR and microwave (MW) detection. The detector works like a classic PIR detector, but if the PIR detects movement in a monitored area, the MW part activates and confirms the previous PIR activation. Specifications:Power source 2 lithium batteries, type CR123A (3 V/1500 mAh); batteries are not included Typical battery life 4 years Low battery charge Quiescent current consumption 65 μA Maximum power consumption 50mA Communication tape 868.1 MHz, JABLOTRON protocol Maximum MW radio frequency power (Effective Radiated Power – ERP) 25mW Communication range approx. 300 m (open space) Recommended installation height 2.2 – 2.5 m above floor level Detection angle/PIR coverage 90°/12 m Detection angle/MW coverage 80°/12 m MW frequency 24.125 GHz Maximum MW radio frequency power (Effective Radiated Power – ERP) 30 mW Sizes 150 x 63 x 40mm Weight (without batteries) 125 g Classification Safety grade 2/Environmental class II (according to EN 50131-1) Operational temperature range -10 °C to +40 °C Average operational humidity 75% relative humidity, no condensation Certification body Trezor Test s.r.o. (no. 3025) In accordance with ETSI EN 300 440, EN 50130-4, EN 55032, EN 62368-1, EN 50581, EN 50131-1, EN 50131-2-4 Operating conditions according to general authorization ERC REC 70-03
€199,35
-
Jablotron JA-152M, Wireless built-in door detector for Pro Series
JA-152M, Wireless built-in door detector for Pro SeriesThe product is a wireless system device for the JABLOTRON 100+. Used to detect windows or doors being opened. This version is designed for concealed installation on window or door frames. Specifications: Current 2x lithium battery, type CR2032 (3.0 V/0.2 Ah)Please note: batteries are not included Typical battery life approx. 2 years Low battery voltage Current consumption 4 μA Maximum power consumption 40mA Communication tape 868.1 MHz, JABLOTRON protocol RF range approx. 300 m (open area) Dimensions 191x24x7mm Weight (without batteries) 32 grams Classification Class 2/II. Indoor general (According to EN 50131-1) Operational environment extensive within general Operational temperature range -20 °C to +60 °C Average operational humidity 75% RH, non-condensing Certification Body Trezor Test sro (no. 3025) Also complies EN 50131-1 edition 2+A1+A2, EN 50131-2-6, EN 50131-5-3+A1, EN 50131-6 edition. 2+A1, ETSI EN 300 220-1-2, EN 50130-4 edition. 2+A1, EN 55032, EN 62368-1, EN 50581 Can be operated according to ERC REC 70-30
€125,87
-
Jablotron JA-152P-GR, Wireless motion detector PIR Gray
JA-152P-GR, Wireless motion detector PIR Gray NOTE: Only works on the Midway Pro and Essex Pro and Mercury The product is a wireless system device for the JABLOTRON 100+. It is designed to detect human body movements in buildings. The guaranteed detection coverage is 90°/12 m. The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors. Specifications: Compatible with F-Link 2.0.0 and higher Current 1 Lithium battery type CR123A (3 V/1500 mAh)Please note: Battery not included Typical battery life 4 years (longest in smartwatch mode, at 20°C) Low battery voltage Power consumption in standby mode 30 μA Maximum power consumption 100mA Communication tape 868.1 MHz, JABLOTRON protocol Communication range approx. 300 m (open area) Recommended installation height 2.2 – 2.5 m above the floor Detection angle/detection coverage 90°/12 meters Dimensions 62x110x40mm Weight (without battery) 90 grams Classification Safety class 2/Environmental class II (according to EN 50131-1) Operational environment In general Operational temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification Body Trezor Test sro (no. 3025) Matches EN 50131-1 edition. 2+A1+A2, EN 50131-2-2, EN 50131-5-3+A1, EN 50131-6 edition. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 edition. 2+A1, EN 55032, EN 62368-1, EN 50581 Can be operated according to ERC REC 70-30
€168,19
-
Jablotron JA-162PC-GR, Wireless motion detector with photo camera Gray
JA-162PC-GR, Wireless motion detector with photo camera Gray This device is a wireless part of the JABLOTRON system. It serves for the detection of human movements in the interior of buildings and visual alarm confirmation. The camera takes color photos with a resolution of up to 640x480 pixels. The camera is equipped with a visible flash to take photos in the dark. The images are stored in the internal memory of the detector and are then transferred to the control panel and from the control panel they can be sent to MyJABLOTRON or ARC. The detector can also take a photo on request. The detector occupies one position in the system and must be installed by a trained technician with a valid certificate issued by an authorized distributor. The photo verification can only be used after registering the system with MyJABLOTRON or with a subsequent ARC service. This device is compatible with control panels JA-103K, JA-107K, JA-102K and higher models. Specifications: Current 2x lithium battery type CR123A 3 V/1.5 Ah Typical battery life about 2 years (1 activation and 1 series of photos per day)Please note: batteries are not included LowBatt voltage ≤2.8V Quiescent current consumption 90 µA Maximum power consumption 700mA Communication frequency 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) 11mW Communication range approx. 300 m (unrestricted area) Recommended installation height 2.5 m above the floor PIR detection angle/detection coverage 90°/12 meters Horizontal camera shooting angle 90° Range of the flash maximum 3 meters Camera resolution LQ 320x240; HQ 640 x 480 pixels Photo format LQ/HQ 5–20 KB/5–64 KB Typical (LQ) photo transmission time to the control panel up to 20 s (10 s) Typical (HQ) photo transmission time to the control panel up to 130 s (60 s) Typical time for transferring photos to the server 15 seconds/GPRS; 2 seconds/LAN Dimensions, weight (without batteries) 150 x 65 x 44 mm, 130 grams Operational temperature range -10 °C to +40 °C Operational environment In general Average operational humidity 75% RH, without condensation Classification Safety class 2/Environmental class II (EN 50131-1) Certification Body Trezor Test No. 3025 Matches EN 50131-1, EN 50131-2-2, EN 50131-5-3, EN 50131-6, EN 55032, ETSI EN 300 220-1,-2, EN 62368-1, EN IEC 63000 Can be operated according to ERC/REC-70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)
€365,48
-
Jablotron JA-162PW-GR, Wireless Designline Dual MW PIR
JA-162PW-GR, Wireless Designline Dual MW PIR This product is a wireless device of the JABLOTRON 100+ system. This detector is designed to detect human body movements in buildings. High immunity against false alarms is achieved thanks to the combination of PIR and microwave (MW) detection. The detector works like a classic PIR detector, but if the PIR detects movement in a monitored area, the MW part activates and confirms the previous PIR activation. Specifications:Power source 2 lithium batteries, type CR123A (3 V/1500 mAh); batteries are not included Typical battery life 4 years Low battery charge Quiescent current consumption 65 μA Maximum power consumption 50mA Communication tape 868.1 MHz, JABLOTRON protocol Maximum MW radio frequency power (Effective Radiated Power – ERP) 25mW Communication range approx. 300 m (open space) Recommended installation height 2.2 – 2.5 m above floor level Detection angle/PIR coverage 90°/12 m Detection angle/MW coverage 80°/12 m MW frequency 24.125 GHz Maximum MW radio frequency power (Effective Radiated Power – ERP) 30 mW Sizes 150 x 63 x 40mm Weight (without batteries) 125 g Classification Safety grade 2/Environmental class II (according to EN 50131-1) Operational temperature range -10 °C to +40 °C Average operational humidity 75% relative humidity, no condensation Certification body Trezor Test s.r.o. (no. 3025) In accordance with ETSI EN 300 440, EN 50130-4, EN 55032, EN 62368-1, EN 50581, EN 50131-1, EN 50131-2-4 Operating conditions according to general authorization ERC REC 70-03
€199,35
-
Jablotron JA-169P Wireless outdoor detector (dual detection)
Jablotron JA-169P Wireless outdoor detector (dual detection) The detector is designed to detect the movement of people in the outdoor environment. The optical part of the detector contains two PIR sensors with AND logic. An alarm signal will only occur if both detection zones are crossed simultaneously. The detector is equipped with a anti-mask function - protection against blinding/tampering of the detector and also has two built-in tampers (front and back). They immediately report the opening of the detector or an attempt to do so. The detector has a periodic self-test function and sends its status to the control panel. Power supply 1x lithium battery type CR123A (3.0 V / 1.4 Ah) Battery life approx. 3 years Maximum power consumption 55mA communication frequency: 868.1 MHz, JABLOTRON protocol Maximum radio frequency output (ERP) 25mW Communication range: approx. 300 m Environment outside general Ingress Protection Code IP45 Operating temperature range: -25 °C to +60 °C Dimensions 189 x 81 x 98 mm Weight (without battery) 380 grams Detection features: 15 m / 85°, 11 segments
€389,00
You have 44 of the 44 products seen