Jablotron

Show previous products

• 

  View options

  Jablotron AN-868-2PIN External antenna

  In stock, delivery time 1 to 3 working days

  Jablotron AN-868-2PIN External antenna The external antenna AN-868 is used to extend the communication range of wireless components of Jablotron security systems, which operate on the frequency of 868 MHz.A special construction of the PIFA type not only guarantees very good transmission properties on different substrates, but also serves as tamper detection in the event of an interruption or short circuit in the power supply (this functionality must be supported by the connected component). The antenna can be mounted indoors or outdoors.The AN-868-2PIN version is connected via a 2-pin connector, which is used with the elements of older systems and the existing elements of the JABLOTRON 100 system.

  Read more less

  In stock, delivery time 1 to 3 working days

  €66,02

  View options

• 

  View options

  Jablotron JA-151P-WG, DesignLine Wireless PIR with white-light protection

  In stock, delivery time 1 to 3 working days

  Jablotron JA-151P-WG, DesignLine Wireless PIR with white-light protection The new PIR detectors of the JABLOTRON 100 series present the result of very high quality design goals. With their shape they will fit aesthetically even in the most luxurious interiors. In addition to their clean appearance, the new PIR detectors offer a wide range of installation options. In addition to standard positioning in a corner of a room, they can be installed on a wall surface using a JA-193PL holder with an aesthetic frame, where the detector is partially recessed and forms a harmonious, elegant whole with the wall. The holder is designed for mounting on plasterboard or brick walls. It is available in sizes S or M (for different detector sizes) and in two color versions - white and gray.The JA-191PL hinged holder provides a solution for special applications such as mounting on the ceiling or on a wall with a specific detector slope. The holder is a certified accessory of the new design series PIR detectors and is supplied with a tamper contact, which can be connected to a connector in the detector.The guaranteed detection coverage of the PIR detectors of the new design is 90 ° / 12 m. In addition, the version with a gray lens with its resistance to white light significantly exceeds the values ​​prescribed by the standard, which helps to reduce false alarms caused, for example, when lighting cars through the windows.The new design range of PIR detectors and their accessories meets the design and aesthetic requirements of even the most demanding customer. These features, together with their great versatility and ease of installation, put these products in a whole new class. Product Info

  Read more less

  In stock, delivery time 1 to 3 working days

  €152,90

  View options

• 

  View options

  Jablotron JA-101KR central Wireless LAN 2G Module

  In stock, delivery time 1 to 3 working days

  Do you want a SIM card in this alarm system? Then please pay attention: This exchange does not have 4G!The only network that still offers 2G is KPN until April 2025. https://www.Alarma Total/nl/blogs/blog/uitphasing-2g/ SIM card:It is of course important that your Central is always connected to the internet.This way you will not be faced with unwanted situations if your provider has problems or carries out maintenance.To solve this, you can purchase a SIM card, which will serve as a backup for your Central!Order SIM card JA-101KR central Wireless LAN 2G Module The Jablotron JA-101K-LANR with GSM/GPRS communicator, radio module and LAN connection is the latest control panel of the JABLOTRON JA-100 alarm system. It is a flexible system that makes it possible to protect small properties such as family homes, offices and companies. The desired settings and the size of the system can be programmed using the F-link Software. The JA-110R radio BUS module makes it possible to connect wireless components such as detectors to the alarm system. To ensure a good radio signal, a maximum of 3 JA-110R radio modules can be installed.In total, the JA-101K central unit offers space for up to 50 wireless components.The module communicates and is also powered by the BUS. It is possible to install the module in the housing of the control panel. It is possible to assign the detector to a zone and it only occupies one position in the alarm system.The JA-101KR offers:• up to 50 wireless or BUS wired zones• up to 50 user codes• up to 6 sections• up to 8 programmable outputs• 20 independent timetables• System informs up to 8 users by SMS• 5 users have the voice option and an SMS report at their disposal• 4 control room settings• 4 selectable independent monitoring centers for reporting are available Contact ID SIA ProtocolThe system has a built-in GSM/GPRS module and a LAN module, allowing communication via voice message, SMS, GPRS or LAN with the users or the control room. The system is equipped with a 1 GB memory card, allowing you to store reports, voice menus, messages, photos and much more.   Product Info

  Read more less

  In stock, delivery time 1 to 3 working days

  €872,45

  View options

• 

  View options

  Jablotron JA-111H TRB connection module wired detector

  In stock, delivery time 1 to 3 working days

  JA-111H TRB connection module wired detectorThe JA-111H TRB module is an innovation of the JA-111H product. The innovation consists of a reduction in dimensions, extension of the connecting wires to 30 cm, the addition of a TRB input and minor changes to the internal settings.The JA-111H TRB module is designed to connect any wired detector (with contact or impulse outputs) to the JABLOTRON 100 system and supply it with power. This built-in module can be integrated directly into the detector. *One input of the module has a fixed tamper signal, the second input reports an alarm signal and the third input is used to report a fault from a connected device or a special "Masking" signal (for detectors with an anti-masking function).*The module can also be used to connect a roller blind detector CT-01.*The module can be used to control programmable PG outputs.*It supports setting a minimum activation time for alarm activation (0.1 s - 300 s). *The detector has both status and impulse activation. *The module is a device of the JABLOTRON 100 system, is addressable and occupies one position in the system.

  Read more less

  In stock, delivery time 1 to 3 working days

  €38,80

  View options

• 

  View options

  Jablotron JA-80N Card reader without keyboard

  In stock, delivery time 1 to 3 working days

  JA-80N Card reader without keyboardIt usually controls access to a door, but it can also be used to control the control panel if necessary. Connect this unit to the control panel with a cable via a WJ-80 interface module. The JA-80N is a version that only has a card reader, no keyboard.Specifications:• Power supply 10 to 16V DC• Standby consumption Typically 60mA• Housing protection (EN 60529) IP65• Mechanical endurance (EN 50102) IK08• Environment (EN 50131-1): Class IV – General outdoor•Operating temperature: -25 to 60°C• RFID card: Jablotron PC-01 or PC-02 (EM UNIQUE 125 kHz)• Dimensions: 46 x 150.5 x 22.5mm• Length of the connection cable: 1m• Complies with grade 2 (EN 50131-1, TS 50131-3) 

  Read more less

  In stock, delivery time 1 to 3 working days

  €150,00

  View options

• 

  View options

  Jablotron 100KR central Wireless LAN

  In stock, delivery time 1 to 3 working days

  Do you want a SIM card in this alarm system? Then please pay attention: This exchange does not have 4G!The only network that still offers 2G is KPN until April 2025. https://www.Alarma Total/nl/blogs/blog/uitphasing-2g/SIM card:It is of course important that your Central is always connected to the internet.This way you will not be faced with unwanted situations if your provider has problems or carries out maintenance.To solve this, you can purchase a SIM card, which will serve as a backup for your Central!Order SIM card Jablotron JA-100 KR with radio module and LAN The JA-100KR control panel is a main component of the JABLOTRON JA-100 alarm system. It is a flexible system that makes it possible to protect small installations such as family homes. The desired settings and the size of the system can be programmed using the F-link Software. All detectors of the Jablotron 100 series can be linked, with the exception of the code control panels JA-11x and JA15x models. The only working code keypads are the JA-110E and the JA-150E. The JA-100KR offers:• up to 32 wireless and/or BUS wired zones• up to 32 user codes• up to 4 sections• up to 4 programmable outputs• 10 independent timetables• System informs up to 8 users by SMS• 5 users have the voice option and an SMS report at their disposal• 5 control room settings• 5 selectable, independent control rooms; notifications via Contact ID or SIA ProtocolThis exchange does not have a GSM dialer, which can be obtained here: JA-101KR GSM + LAN or the separate module JA-190YThe system has a built-in LAN module, which allows communication via a voice message or SMS (from the cloud) with the users or the control room. The system is equipped with a 1 GB memory card, which allows you to store reports, voice menus, messages, photos and much more. Product Info  

  Read more less

  In stock, delivery time 1 to 3 working days

  €516,02

  View options

• 

  View options

  Jablotron JA-151ST-A Wireless smoke and heat detector with dual siren function (burglary and fire alarm)

  In stock, delivery time 1 to 3 working days

  Jablotron JA-151ST-A Wireless smoke and heat detector with dual siren function (burglary and fire alarm)The completely wireless smoke and heat detector from Jablotron protects your home and fireplace. The detector is used to detect fire hazards in the interior of residential or commercial buildings. It consists of a siren, which indicates a fire alarm, both from the entire detector and from another fire detector in the system.Unique featuresThe smoke detector has a built-in siren that signals fire and burglar alarms. This message is accepted by all detectors in the system!The detector communicates wirelessly and is powered by batteries (3x 1.5 V AA).If the detector is operated without being assigned to a control panel or if communication with the control panel is lost, it operates in an autonomous mode (EN 14604).The detector optically indicates a dangerous situation with an integrated light and a siren. It is able to acoustically report:– A fire alarm detected by the detector itself– A fire alarm from the system (alarm activated by another fire detector)– Other type of alarm (e.g. burglar alarm)– For alarms reported by the system, sections can be set for which the alarm is indicatedThe product contains two separate detectors – an optical smoke detector and a temperature detector. The optical smoke detector uses the principle of diffuse light. It is very sensitive to particles present in thick smoke. It is less sensitive to small particles produced by burning liquids such as alcohol. That is why a heat detector has been integrated, which responds better to a fire, quickly developing heat with a small amount of smoke.The fire detectors must be installed by an experienced installer with a valid certificate issued by Jablotron. The detector is not designed for installation in industrial environments.Product Info

  Read more less

  In stock, delivery time 1 to 3 working days

  €189,84

  View options

• 

  View options

  Jablotron JA-111ST-A BUS combined smoke and heat detector with fire and burglar siren

  In stock, delivery time 1 to 3 working days

  Jablotron JA-111ST-A BUS combined smoke and heat detector with fire and burglar siren functionThe product is used to detect fire hazards in the interior of residential and commercial buildings. The detector is not intended for installation in an industrial environment. The detector is powered via the control panel bus. When the detector is used with batteries (3x 1.5 V AA) from which it can be powered, it will continue to function as a standalone detector when the 12 V supply is disconnected (EN 14604).The smoke detector has a built-in siren that signals fire and burglar alarms. This message is accepted by all detectors in the system!The detector indicates fire danger using the built-in LED indicator and acoustic signaling.The JA-111ST-A product consists of two independent detectors – an optical smoke detector and a heat detector. The optical smoke detector works according to the principle of scattered light. It is very sensitive to coarser dust particles present in dense smoke. The product is less sensitive to smaller particles generated by combustion of liquids such as alcohol. That is why the fire detector also contains a built-in heat detector, which reacts more slowly, but is better able to detect a fire that generates only a small amount of smoke.Product Info

  Read more less

  In stock, delivery time 1 to 3 working days

  €123,81

  View options

• 

  View options

  Jablotron JA-152PG, Pro DesignLine Wireless PIR with white-light protection

  In stock, delivery time 1 to 3 working days

  Jablotron JA-152PG, Pro DesignLine Wireless PIR with white-light protection The product is a wireless system device for the Midway Pro and Essex Pro. This detector is designed to detect human body movements in buildings. The guaranteed detection coverage is 90° / 12 m. The gray lens option has a resistance to white light that is significantly higher than the values ​​prescribed in the standard. The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors.White light resistance helps reduce false alarms caused by window illumination, lightning or reflective objects. The detector offers standard resistance to white light, which significantly exceeds the values ​​prescribed by the standard (up to 10,000 lux). The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors in all installation versions. In addition to standard positioning in a corner of a room, it can be installed on a wall surface using an aesthetic mounting box JA-196PL-S, where the detector is partially recessed and forms an elegant whole with the wall. The hinge holder JA-191PL can be used for special applications such as ceiling mounting or oblique detection angle. The detector is equipped with impulse activation. The detector can be used to control programmable PG outputs. Compatible with F-Link 2.0.0 and higher Power source 1x lithium battery, CR123A (3 V / 1500 mAh) Typical lifespan 4 years (in Smartwatch mode) Communication frequency 868.1MHz Communication range approx. 300 m (free terrain) Recommended installation height 2.2 – 2.5 m above floor level Detection angle / detection range 90° / 12 m Sizes: 62 x 110 x 40mm Classification safety level 2/environmental class II, in accordance with EN 50131-1 ed. 2+A1+A2, EN 50131-2-2 Environment according to EN 50131-1 II. indoor, general Operational temperature range -10 °C to +40 °C This also meets the requirements of EN 50131-5-3+A1, EN 50131-6 ed. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581

  Read more less

  In stock, delivery time 1 to 3 working days

  €152,90

  View options

• 

  View options

  Jablotron JB-150N-HEAD Wireless thermostat knob

  In stock, delivery time 1 to 3 working days

  JB-150N-HEAD Wireless thermostat knob The JB-150N-HEAD is a completely wireless thermostat knob that can be connected to all Jablotron 100 panels!It is used to control a radiator valve or underfloor heating. This thermostat knob is combined with a PG relay module to activate or deactivate the boiler.Jablotron has wired and completely wireless thermostats that can be chosen to complete the system.In the system you can create a zone with multiple thermostat buttons. This way you can divide the building into multiple heating zones!Up to 16 actuators can be installed in a building, regardless of the settings of individual thermostats. For installation, the correct adapter type must be selected in accordance with the radiator valve. As supplied by the manufacturer, the actuator includes the basic VA 50 adapter, which is designed for common valves with screw connection dimensions of M30 × 1.5. If necessary, we offer 4 other adapter types: JB-VA16,JB-VA26, JB-VA78 and JB-VA80.The valve actuator is then simply assigned to a thermostat, which is registered in the central unit. Then together they offer the following functions:– Automatic switch to the economy temperature when setting the building– Weekly schedule mode– Possibility to enter the manual temperature setting– Possibility to switch this off if only a minimum temperature needs to be maintained in the building– Heating suppression in case of an open window– Report in case of overheating or freezing

  Read more less

  In stock, delivery time 1 to 3 working days

  €144,62

  View options

• 

  View options

  Jablotron JA-150TP, Wireless thermostat

  In stock, delivery time 1 to 3 working days

   Jablotron JA-150TP, Wireless thermostat  If you are unsure whether this thermostat fits your central heating installation, please contact us. Control the temperature in your home with the wireless thermostat from Jablotron! All you need is a room thermostat and an installed programmable output module, which we offer in a bus-mounted and wireless version. In addition, you can monitor and control the temperature remotely via the MyJablotron application. MyJablotron is the most complete, versatile and fastest App for security systems.The free app makes it possible for any end user to view and operate the system from anywhere.The thermostat can also be viewed and controlled from the beautifully designed app.   The thermostat can be connected to the Jablotron 100 system and is the ideal addition to the field of automation. Standard programmable outputs of the control panel are used to switch the heating.It is possible to set a weekly program in the thermostat.Up to 4 thermostats can be installed within a building, which can control 4 independent circuits. The product is a component of the JABLOTRON 100 system, is addressable and occupies one position in the system.- Full integration into MyJABLOTRON, = information about the current status and remote control of the thermostat- Automatic switch to the economy temperature when leaving the building- Weekly schedule mode- Ability to enter manual temperature setting- Possibility to switch it off if only a minimum temperature needs to be maintained in the building- Heating suppression when a window is open- Report in case of overheating or freezing- Easy operation via telephone- Temperature history graph- Tamper sensor

  Read more less

  In stock, delivery time 1 to 3 working days

  €189,84

  View options

• 

  View options

  Jablotron JB-EXT-TH-B - Bus Wired Outdoor Thermometer

  In stock, delivery time 1 to 3 working days

  Jablotron JB-EXT-TH-B - Bus Wired Outdoor ThermometerThe Bus Wired Thermometer can be used in an outdoor environment or in an environment with demanding climatic conditions. A temperature diagram can be drawn in the MyJABLOTRON application, and when a certain temperature is reached, temperature messages or switching of PGs can be set.The thermometer is designed for the control panels of the JABLOTRON 100 system. It measures the internal temperature, or an external temperature sensor (JB-TS-PT1000)JB-EXT-TH-B can be connected with a measuring temperature range of –50 °C to +200 °C. Product Info

  Read more less

  In stock, delivery time 1 to 3 working days

  €90,80

  View options

• 

  View options

  Jablotron JA-110E wired control panel

  In stock, delivery time 1 to 3 working days

   Jablotron JA-110E wireless control panelThe Jablotron JA-110E is a compact wired code control panel. This can be connected to all central units from the Jablotron 100 series.This compact code control panel contains an LCD screen, control buttons and an RFID reader. Integrated on the control panel are 4 buttons (A, B, C, D) that can be set to operate sections or control PG outputs.These functional keys also serve as status indicators.– It communicates via a bus and is powered by it– It contains a wired input for the connection of a magnetic detector– The keypad is addressable and occupies one position in the security system– In a user-friendly menu, it provides easy operation, management of users and detectors and browsing of event history.Product InfoThis control panel can be combined with control panels from the JA-101KR, JA-106KR and the JA-100KR series.

  Read more less

  In stock, delivery time 1 to 3 working days

  €206,34

  View options

• 

  View options

  Jablotron JB-VA26 valve adapter

  In stock, delivery time 1 to 3 working days

  JB-VA26 valve adapter Adapter for connecting the JB-150N-HEAD actuator to a radiator valve. The package contains 5 adapters.The type VA26 is designed for the valve type:– Giacomini– Giacomini Angle valve (H)Adapter type: VA26Valve: Giacomini, Giacomini Angle valve (H)

  Read more less

  In stock, delivery time 1 to 3 working days

  €53,86

  View options

• 

  View options

  Jablotron JA-103K central unit with LAN connection

  In stock, delivery time 1 to 3 working days

  Do you want a SIM card in this alarm system? Then please pay attention: This exchange does not have 4G!The only network that still offers 2G is KPN until April 2025. https://www.Alarma Total/nl/blogs/blog/uitphasing-2g/ SIM card:It is of course important that your Central is always connected to the internet.This way you will not be faced with unwanted situations if your provider has problems or carries out maintenance.To solve this, you can purchase a SIM card, which will serve as a backup for your Central!JA-103K central LAN The JA-103K control panel is a main component of the JABLOTRON JA-100 alarm system. It is a flexible system that makes it possible to protect small installations such as family homes. The desired settings and the size of the system can be programmed using the F-link Software.  The JA-103K central unit offers: 50 wireless or bus devices 50 users 8 sections 32 programmable PG outputs 20 mutually independent calendar events 8 SMS reports and voice messages for users 5 control rooms can be set up 5 selectable protocols for a control room The central contains: 1 bus terminal board for bus connection 1 connector for a built-in radio module (JA-111R) optional 1 A connector for a GSM/GPRS communicator (JA-192Y) The control panel also offers functions such as: Maintenance Day/night mode Short departure response Automatic setting Advanced calendar features Product Info

  Read more less

  In stock, delivery time 1 to 3 working days

  €495,17

  View options

• 

  View options

  Jablotron JA-152P, Pro Designline Wireless PIR

  In stock, delivery time 1 to 3 working days

  Jablotron JA-152P, Pro Designline Wireless PIRThe product is a wireless system device for the Jablotron Midway Pro and Essex Pro. This detector is designed to detect human body movements in buildings. Its guaranteed detection coverage is 90°/12 m. The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors. In addition to standard positioning in a corner of a room, it can be installed on a wall surface using a mounting box JA-196PL-S, where the detector is partially recessed and forms an elegant whole with the wall. The hinge holder JA-191PL can be used for special applications such as ceiling mounting or oblique detection angle. The detector is equipped with impulse activation. The detector can be used to control programmable PG outputs. False alarm resistance can be set to two levels. The detector offers standard resistance to white light at the level prescribed by the standard (up to 6000 lux). The detector is addressable and occupies one position in the security system.   Compatible with F-Link 2.0.0 and higher Power source 1x lithium battery, CR123A (3 V / 1500 mAh) Typical lifespan 4 years (in Smartwatch mode) Communication frequency 868.1MHz Communication range approx. 300 m (free terrain) Recommended installation height 2.2 – 2.5 m above floor level Detection angle / detection range 90° / 12 m Sizes: 62 x 110 x 40mm Classification safety level 2/environmental class II, in accordance with EN 50131-1 ed. 2+A1+A2, EN 50131-2-2 Environment according to EN 50131-1 II. indoor, general Operational temperature range -10 °C to +40 °C This also meets the requirements of EN 50131-5-3+A1, EN 50131-6 ed. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581

  Read more less

  In stock, delivery time 1 to 3 working days

  €133,00

  View options

• 

  View options

  Jablotron JA-110Z-D Multipositional bus contact module

  In stock, delivery time 1 to 3 working days

  Jablotron JA-110Z-D Multipositional bus contact module This module is designed to connect the conductors of complex bus installations of the JABLOTRON 100 system. It can be divided into two independent bus branches by disconnecting jumpers.It can be installed in the junction box JA-194PL, PLV-CP-M / L or directly in the central JA-106K.Product Info

  Read more less

  In stock, delivery time 1 to 3 working days

  €33,01

  View options

• 

  View options

  Jablotron JB-110N Pro Bus PG power output module

  In stock, delivery time 1 to 3 working days

  Jablotron JB-110N Pro Bus PG power output module The product is a system device for the Jablotron Midway Pro and Essex Pro. It provides a switching contact for the output power relay. For example, it can be used to control lighting, fans, etc. The relay communicates via the bus and is powered by the control panel bus. It can be installed in a JA-19xPL installation box or a control box.  

  Read more less

  In stock, delivery time 1 to 3 working days

  €82,53

  View options

• 

  View options

  Jablotron JA-192Y GSM dialer for Jablotron Pro Centrales

  In stock, delivery time 1 to 3 working days

  Jablotron JA-192Y GSM dialer for Jablotron Pro Centrales   The control panel equipped with a JA-192Y communicates via a mobile network with a central monitoring station, enables control and mobile applications via the web and sends alarm SMS messages and voice messages. This allows the system to be set up remotely using the settings of the F-Link program.

  Read more less

  In stock, delivery time 1 to 3 working days

  €288,86

  View options

• 

  View options

  Jablotron JA-115P Pro Bus PIR ceiling motion detector

  In stock, delivery time 1 to 3 working days

  Jablotron JA-115P Pro Bus PIR motion detector ceilingThe product is a bus system device for the Midway Pro and Essex Pro. This detector is designed to detect human body movements in buildings. Compared to standard motion detectors from the JABLOTRON 100 series, this detector is designed for ceiling mounting. The product is installed on the ceiling and its guaranteed detection range is 360° with a detection radius of up to 5.5 m at a mounting height of 3.5 m. False alarm resistance can be set to two levels. The detector has a pulse response and occupies one position in the system. For automation functions, detection sensitivity can be increased in the activated system state. A circular spacer (PLV-P-ST) has been developed as a certified accessory for ceiling-mounted detectors, allowing the bus cable to be concealed in cases where it cannot be neatly concealed in the ceiling. Product Info

  Read more less

  In stock, delivery time 1 to 3 working days

  €99,04

  View options

• 

  View options

  Jablotron PC-02B Proximity tag key ring Black

  In stock, delivery time 1 to 3 working days

  Jablotron PC-02B Proximity tag key ring blackThe Jablotron PC-02B is a black plastic key tag (RFID standard EM UNIQUE 125kHz). Up to 50 cards can be used in the system. For higher security, each key tag can be combined with a digital code (PIN).

  Read more less

  In stock, delivery time 1 to 3 working days

  €2,85

  View options

• 

  View options

  Jablotron JA-158P Wireless outdoor PIR detector

  In stock, delivery time 1 to 3 working days

  Jablotron JA-158P Wireless outdoor PIR detectorThe Ja-158P provides stable and accurate detection in outdoor conditions. The outdoor PIR motion detector is based on a double-sensor motion detector produced by the company OPTEX.The detection range can be adjusted in the axis of the optics from 1.4 to 12 meters with a coverage angle of 85°. The Ja-158P detector is completely wireless and compatible with the JABLOTRON 100 system. It is possible to assign the detector to a zone and it only occupies one position in the alarm system.Product Info

  Read more less

  In stock, delivery time 1 to 3 working days

  €543,16

  View options

• 

  View options

  Jablotron CT-01 Roller shutter detector

  In stock, delivery time 1 to 3 working days

  Jablotron CT-01 Roller shutter detector The CT-01 is a wired detector intended for detecting the unauthorized movement of external shutters on houses or buildings. This detector is hardwired and can be connected with JA-150M or JA-81M to continue communication wirelessly.By using this detector it is possible to optimally protect the building against intruders. When the shutters are forced, this will be detected and the alarm can respond. Even before the intruder gets in! False alarms caused by the wind, which causes the shutters to move only slightly, are avoided because the alarm only occurs when at least 3 pulses are received within 5 seconds.Product Info

  Read more less

  In stock, delivery time 1 to 3 working days

  €45,59

  View options

• 

  View options

  Jablotron JA-112P, Pro DesignLine PIR BUS

  In stock, delivery time 1 to 3 working days

  Jablotron JA-112P, Pro DesignLine PIR BUS The product is a bus system device for the Midway Pro and Essex Pro. This detector is designed to detect human body movements in buildings. Its guaranteed detection coverage is 90° / 12 m. The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors.In addition to standard positioning in a corner of a room, it can be installed on a wall surface using a mounting box JA-196PL-S, where the detector is partially recessed and forms an elegant whole with the wall. The hinge holder JA-191PL can be used for special applications such as ceiling mounting or oblique detection angle. The detector is equipped with impulse activation.The detector can be used to control programmable PG outputs.False alarm resistance can be set to two levelsThe detector offers standard resistance to white light at the level prescribed by the standard (up to 6000 lux).The detector is addressable and occupies one position in the security system. Product Info

  Read more less

  In stock, delivery time 1 to 3 working days

  €70,36

  View options

Show more products