Jablotron modules
Jablotron modules
-
Jablotron JA-190X PSTN communication module
Jablotron JA-190X PSTN communication moduleThe JA-190X is a PSTN communication module for the JA-106KR. The module offers the option of Contact ID DTMF, SIA DC-05 or SIA FSK with standard DC-03 protocol for control room communication and/or voice messages.Remotely access the system through the PSTN telephone lineAccording to the settings of the central unit by F-Link software, i.e. the Communication / Voice menu and the control SMS tabs, when you call the system from any / authorized phone the system will answer your call and ask you to enter your valid code. The communicator offers options with your voice. The structure of the voice menu changes with the restriction level of inputcode.If a new event occurs in the system, the call will be terminated.
€128,11
-
Jablotron JA-192Y GSM dialer for Jablotron Pro Centrales
Jablotron JA-192Y GSM dialer for Jablotron Pro Centrales The control panel equipped with a JA-192Y communicates via a mobile network with a central monitoring station, enables control and mobile applications via the web and sends alarm SMS messages and voice messages. This allows the system to be set up remotely using the settings of the F-Link program.
€288,86
-
Jablotron CT-01 Roller shutter detector
Jablotron CT-01 Roller shutter detector The CT-01 is a wired detector intended for detecting the unauthorized movement of external shutters on houses or buildings. This detector is hardwired and can be connected with JA-150M or JA-81M to continue communication wirelessly.By using this detector it is possible to optimally protect the building against intruders. When the shutters are forced, this will be detected and the alarm can respond. Even before the intruder gets in! False alarms caused by the wind, which causes the shutters to move only slightly, are avoided because the alarm only occurs when at least 3 pulses are received within 5 seconds.Product Info
€45,59
-
Jablotron JA-110Z-D Multipositional bus contact module
Jablotron JA-110Z-D Multipositional bus contact module This module is designed to connect the conductors of complex bus installations of the JABLOTRON 100 system. It can be divided into two independent bus branches by disconnecting jumpers.It can be installed in the junction box JA-194PL, PLV-CP-M / L or directly in the central JA-106K.Product Info
€33,01
-
Jablotron JB-110N Pro Bus PG power output module
Jablotron JB-110N Pro Bus PG power output module The product is a system device for the Jablotron Midway Pro and Essex Pro. It provides a switching contact for the output power relay. For example, it can be used to control lighting, fans, etc. The relay communicates via the bus and is powered by the control panel bus. It can be installed in a JA-19xPL installation box or a control box.
€82,53
-
Jablotron JB-118N Pro Bus signal PG output module – 8 outputs
JB-118N Pro Bus signal PG output module – 8 outputs Key features: The product is a system device for the Jablotron Midway (Pro) and Essex (Pro) The outputs are isolated from the bus It is set using the DIP switch The device is not addressable (it does not occupy a position in the security system)
€119,88
-
Jablotron JA-112M, Bus module for magnetic contacts, 2 inputs
JA-112M, Bus module for magnetic contacts, 2 inputs Up to 100 m of wiring can be connected to each input Inputs can be connected without balancing They can be individually or dual balanced and can be connected to a roller blind switch function The module allows to invert the input or set the minimum activation time to enable the alarm (from 0.1 s to 300 s) The detector communicates with the control panel bus and is powered by this bus The detector is addressable and occupies two positions in the security system
€49,51
-
Jablotron JB-111N BUS signal output module PG
Jablotron JB-111N BUS signal output module PGThe Jablotron JB-111N BUS signal output module PG is designed to provide a changeable output delay (8 A) with a NO or NC setting. An appropriate PG output is controlled via DIP switches (controls 1 of 32 different DIP switches). The module communicates and is powered via the bus connection to the control panel. The JA-111N can be installed in the JA-190PL housing. This module does not occupy any additional space in the zone file.• Power supply: via the BUS of the central unit, 12V (9 - 15 V)• Power off power consumption: 5 mA• On power consumption: 25 mA• Maximum load of the relay output: maximum 1 A/30 V DC• Minimum switching current: 10 mA • Environment in accordance with EN 50131-1, EN 50131-3: II, indoor• Operating temperature: -10 to 40 °C
€74,29
-
Jablotron JA-194Y, GSM 4G dialer for the JA-103K/107K
Main features:- 4G Chooser for the Jablotron 103K and 107K systems- Power source for the module 9-15 V DC (from the control panel)- Average power consumption 9 mA (depending on GSM signal strength)- Current power consumption 720 mA- 2G (GSM, EDGE) 900/1800 MHz GSM communication band- 3G 900/2100 MHz (B8, B1) GSM communication band- 4G (LTE) 800/900/1800/2100/2600 MHz (B20,B8,B3,B1,B7) GSM communication band- I&HAS classification Safety grade 2/Environmental class II- Dimensions/weight 70mm x 37mm x 25mm/23gr.- Operational environment General solution for internal use- Operating temperature -10°C to +40°C- Average operating humidity 75% RH, non-condensing- Compatible with RMT (ARC Receiver) According to communication protocols
€498,48
-
Jablotron JB-161N-PLUG, smart socket with indication LED
Smart, wireless, two-way communicating plugs represent a completely new solution for automation within the JABLOTRON 100+ system. The plug copies the selected PG output.
€149,33
-
Jablotron JA-191Y LTE, GSM 4G dialer for Jablotron 100, 101 and 106
JA-191Y LTE, GSM 4G dialer for Jablotron 100, 101 and 106The LTE-4G GSM module is intended for use with the JA-100K, JA-101K and JA-106K alarm control panels of the JABLOTRON 100+ series.
€474,73
-
Jablotron JA-194PL Mounting box large
JA-194PL Mounting box largeSupported modules: JA-121T, JA-118M, JA-114HN, JA-116H, JA-110Z, JA-110N, JA-111N, JA-150N, JA-151N, JA-118N, ...Product Info
€35,08
-
Jablotron JA-118M BUS module for magnetic detectors - 8 inputs
Jablotron JA-118M BUS module for magnetic detectors - 8 inputsThe Jablotron JA-118M BUS module for magnetic detectors - 8 inputs is specially designed for connecting magnetic detectors. Installation in a JA-190PL universal multifunction box is recommended (or in a universal box).• Power supply via BUS 12 V (9 ... 15 V)• Power consumption in standby 5 mA• Consumption for cable selection 15 mA• Dimensions 50 x 38 x 14 mm• Class 2 according to EN 50131-1, EN 50131-3• Operational environment according to EN 50131-1: II• Operating temperature -10 to +40 ° C• Also complies with EN 50130-4, EN 55022
€128,11
You have 37 of the 37 products seen