Wireless network

Hikvisions wireless bridges have been developed to create network connectivity using 2 or more antennas, including for camera applications. The antennas with PoE input and output are suitable for Point-to-point and point-to-multi-point applications. Each antenna has a convenient Wi-Fi management function for local network, configuration and monitoring via WebUI, with easy installation indicators on the side. Hikvision wireless bridges offer flexible and high-quality solutions for wireless video applications. Good network equipment is essential for reliable and stable operation of a camera system. Hikvision has a wide range of switches with a focus on video applications. Various switches are available with high throughput speed, powerful PoE capabilities and optimization functions for video transmission. Available in managed and unmanaged versions, so that a suitable switch is available for every video application.The antennas are suitable for wall and pole mounting. A set of plastic straps that can be used once is included for pole mounting. Hose clamps can also be used, but they must be ordered separately. Point to Multipoint: This product is suitable for Point to Multipoint. This is not plug & play. This requires a web configuration. Our advice is to first configure and connect the antennas. And only install the antennas when the couplings are working. Clear line of sight is required for good stable operation: To ensure proper operation, you must use 2 antennas and they must have a clear view of each other. Buildings, trees and other obstacles should be avoided. There is a signal indicator on the antennas from which the quality of the connection can be read directly. There is a signal indicator on the antennas from which the quality of the connection can be read directly. Try to place the antennas within sight of each other so that the indicator gives the highest possible indicationSpecifications:  Hardware: Interfaces: 1 × PoE RJ–45 (1000 Mbps), 1 × LAN RJ–45 (1000 Mbps) Nutrition: PoE IN: 802.3at Included: Power adapter, antenna Ethernet ports: 2 (10/100/1000 Mbps) Energy consumption: External ports: 2 × RJ–45, 1 × Reset Indicator lights: Power, LAN, Signal intensityFeatures: Encryption: WPA-PSK, WPA/WPA2, hidden SSID Management: Web configuration, Syslog, NTP Certification: CE, FCC Network protocols: UDP, TCP, HTTPS, IPv4, NTP, DHCP TDMA: Yes, with improvementsGeneral: Range: Up to 5 km range at 35° angle Temperature: -30 °C to +70 °C Humidity: 5%–95%, non-condensing Weight: 0.46 kg (gross), 0.307 kg (net) Dimensions: 132 × 228 × 91 mm (packaging), 90.8 × 57.8 × 187.8 mm (product) Assembly: Pole and wall mounting (including ty-wraps)

Read more less

Dahua's wireless bridges provide reliable and powerful wireless connectivity for camera applications, among others. These bridges have special antennas with PoE input and output, suitable for point-to-point, point-to-multi-point and back-to-back applications. Each antenna has a convenient Wi-Fi management function for local network, configuration and monitoring via WebUI, with easy installation indicators on the side. Dahua's wireless bridges provide flexible and high-quality solutions for wireless video applications.The Dahua WBC5 series is an ideal solution for making wireless connections to camera products. The specifications are for reference, the final performance depends on the environment. This solution is ideal for wireless connections to, for example, camera masts or outbuildings without their own network facilities. The feasibility of the connection is indicated in kilometers. Clear line of sight is required for good stable operation: To function properly, the antennas must have a clear view of each other. Buildings, trees and other obstacles should be avoided. There is a signal indicator on the antennas from which the quality of the connection can be read directly.The antennas are supplied with mounting material and therefore hose clamps. The supplied hose clamp is suitable for posts with a diameter between 59 and 82mmA longer clamp is available as an accessory.Specifications: Hardware Interface 1 × PoE RJ–45 (1000 Mbps);1 × LAN RJ–45 (100 Mbps)   Power module connector 1 × PoE RJ–45 (IN: 30 W)   Wireless standard 2.4GHz: 802.11b/g/n;5GHz: 802.11a/n/ac   Nutrition PoE IN: 802.3at;PoE OUT: 802.3af   Included power adapter Yes   Included antenna Yes   Ethernet ports 2   Ethernet port speed 10/100/1000 Mbps   Reset button 1   Energy consumption   External port 2× RJ–45; 1 × Reset   Indicator lights 1 × power indicator;2 × LAN port indicators;1 × PoE indicator;3 × wireless signal strength indicators Features Encryption mode WPA-PSK/AES/TKIP   Management and log Syslog; NTP   Web page Configuration Management via web configuration   Firmware update Web update   Wireless Certification CE/FCC   Security mechanism WPA/WPA2; hidden SSID   Network protocol UDP; TCP; HTTPS; IPv4; NTP; DHCP   TDMA enhancement Yes   TDMA Yes General Range Up to 3KM at an angle of 45°   Operating temperature –30 °C to +65 °C (–22 °F to +149 °F)   Storage temperature –40 °C to +80 °C (–40 °F to +176 °F)   Operating humidity 5%–95% (RH), non-condensing   Gross weight 0.46kg (1.01lb)   Net weight 0.37kg (0.82lb)   Packaging dimensions 297 mm × 110 mm × 108 mm (11.7" × 4.33" × 4.25")   Product dimensions 268 mm × 82 mm × 35 mm (10.55" × 3.23" × 1.38")   Memory 1 GB   Assembly Pole mounting bracket included   Static Protection Air discharge: 15 kV;Contact discharge: 8 kV   Lightning protection Common mode: 6 kV;Differential mode: 4 kV   Installation Pole mounting

Read more less

Dahua's wireless bridges provide reliable and powerful wireless connectivity for camera applications, among others. These bridges have special antennas with PoE input and output, suitable for point-to-point, point-to-multi-point and back-to-back applications. Each antenna has a convenient Wi-Fi management function for local network, configuration and monitoring via WebUI, with easy installation indicators on the side. Dahua's wireless bridges provide flexible and high-quality solutions for wireless video applications.The Dahua WBC5 series is an ideal solution for making wireless connections to camera products. The specifications are for reference, the final performance depends on the environment. This solution is ideal for wireless connections to, for example, camera masts or outbuildings without their own network facilities. The feasibility of the connection is indicated in kilometers. Clear line of sight is required for good stable operation: To function properly, the antennas must have a clear view of each other. Buildings, trees and other obstacles should be avoided. There is a signal indicator on the antennas from which the quality of the connection can be read directly.The antennas are supplied with mounting material and therefore hose clamps. The supplied hose clamp is suitable for posts with a diameter between 59 and 82mmA longer clamp is available as an accessory.Specifications: Hardware Interface 1 × PoE RJ–45 (1000 Mbps);1 × LAN RJ–45 (100 Mbps)   Power module connector 1 × PoE RJ–45 (IN: 30 W)   Wireless standard 2.4GHz: 802.11b/g/n;5GHz: 802.11a/n/ac   Nutrition PoE IN: 802.3at;PoE OUT: 802.3af   Included power adapter Yes   Included antenna Yes   Ethernet ports 2   Ethernet port speed 10/100/1000 Mbps   Reset button 1   Energy consumption   External port 2× RJ–45; 1 × Reset   Indicator lights 1 × power indicator;2 × LAN port indicators;1 × PoE indicator;3 × wireless signal strength indicators Features Encryption mode WPA-PSK/AES/TKIP   Management and log Syslog; NTP   Web page Configuration Management via web configuration   Firmware update Web update   Wireless Certification CE/FCC   Security mechanism WPA/WPA2; hidden SSID   Network protocol UDP; TCP; HTTPS; IPv4; NTP; DHCP   TDMA enhancement Yes   TDMA Yes General Range Up to 5KM at an angle of 30°   Operating temperature –30 °C to +65 °C (–22 °F to +149 °F)   Storage temperature –40 °C to +80 °C (–40 °F to +176 °F)   Operating humidity 5%–95% (RH), non-condensing   Gross weight 0.46kg (1.01lb)   Net weight 0.37kg (0.82lb)   Packaging dimensions 297 mm × 110 mm × 108 mm (11.7" × 4.33" × 4.25")   Product dimensions 268 mm × 82 mm × 35 mm (10.55" × 3.23" × 1.38")   Memory 1 GB   Assembly Pole mounting bracket included   Static Protection Air discharge: 15 kV;Contact discharge: 8 kV   Lightning protection Common mode: 6 kV;Differential mode: 4 kV   Installation Pole mounting

Read more less

Dahua's wireless bridges provide reliable and powerful wireless connectivity for camera applications, among others. These bridges have special antennas with PoE input and output, suitable for point-to-point, point-to-multi-point and back-to-back applications. Each antenna has a convenient Wi-Fi management function for local network, configuration and monitoring via WebUI, with easy installation indicators on the side. Dahua's wireless bridges provide flexible and high-quality solutions for wireless video applications.The Dahua WBC5 series is an ideal solution for making wireless connections to camera products. The specifications are for reference, the final performance depends on the environment. This solution is ideal for wireless connections to, for example, camera masts or outbuildings without their own network facilities. The feasibility of the connection is indicated in kilometers. Clear line of sight is required for good stable operation: To function properly, the antennas must have a clear view of each other. Buildings, trees and other obstacles should be avoided. There is a signal indicator on the antennas from which the quality of the connection can be read directly.The antennas are supplied with mounting material and therefore hose clamps. The supplied hose clamp is suitable for posts with a diameter between 59 and 82mmA longer clamp is available as an accessory.Specifications: Hardware Interface 1 × PoE RJ–45 (1000 Mbps);1 × LAN RJ–45 (100 Mbps)   Power module connector 1 × PoE RJ–45 (IN: 30 W)   Wireless standard 2.4GHz: 802.11b/g/n;5GHz: 802.11a/n/ac   Nutrition PoE IN: 802.3at;PoE OUT: 802.3af   Included power adapter Yes   Included antenna Yes   Ethernet ports 2   Ethernet port speed 10/100/1000 Mbps   Reset button 1   Energy consumption   External port 2× RJ–45; 1 × Reset   Indicator lights 1 × power indicator;2 × LAN port indicators;1 × PoE indicator;3 × wireless signal strength indicators Features Encryption mode WPA-PSK/AES/TKIP   Management and log Syslog; NTP   Web page Configuration Management via web configuration   Firmware update Web update   Wireless Certification CE/FCC   Security mechanism WPA/WPA2; hidden SSID   Network protocol UDP; TCP; HTTPS; IPv4; NTP; DHCP   TDMA enhancement Yes   TDMA Yes General Range Up to 1KM at an angle of 90°   Operating temperature –30 °C to +65 °C (–22 °F to +149 °F)   Storage temperature –40 °C to +80 °C (–40 °F to +176 °F)   Operating humidity 5%–95% (RH), non-condensing   Gross weight 0.46kg (1.01lb)   Net weight 0.37kg (0.82lb)   Packaging dimensions 297 mm × 110 mm × 108 mm (11.7" × 4.33" × 4.25")   Product dimensions 268 mm × 82 mm × 35 mm (10.55" × 3.23" × 1.38")   Memory 1 GB   Assembly Pole mounting bracket included   Static Protection Air discharge: 15 kV;Contact discharge: 8 kV   Lightning protection Common mode: 6 kV;Differential mode: 4 kV   Installation Pole mounting

Read more less

Thanks to the integrated 4G-LTE modem and built-in SIM card slot, all you have to do is insert a SIM card into the Archer MR200 and turn it on. Fast, stable WiFi via a 4G network has never been easier.With the Archer MR200 you can share the 4G network with multiple WiFi devices so you can enjoy HD movies undisturbed and quickly download files without the connection dropping. It is also fully compatible with FDD-LTE and TDD-LTE, which are supported by most carriers worldwide.The Archer MR200 can effortlessly share a 3G/4G connection with up to 64 wireless devices, such as tablets, laptops and mobile phones. It also provides Internet access for desktop computers via the LAN ports.Specifications: Interface 3 10/100Mbps LAN Ports, 1 10/100Mbps LAN/WAN Port, 1 Micro SIM Card Slot Button WPS/Reset Button, WiFi On/Off Button, Power On/Off Button External Power Supply 12V/1A Dimensions (W x D x H) 7.95 x 5.71 x 1.34 in. (202 x 145 x 34mm) Antenna V3: 2 Internal 4G LTE AntennasV4/V2/V1: 2 Detachable 4G LTE Antennas Wireless Features Standards for Wireless Networks IEEE 802.11ac/n/a 5GHz, IEEE 802.11b/g/n 2.4GHz Frequency 2.4GHz and 5GHz Transfer speed 300Mbps at 2.4GHz, 433Mbps at 5GHz Reception sensitivity 5GHz: 11a 54M: -74dBm11ac HT20: -67dBm11ac HT40: -64dBm11ac HT80: -60dBm11n HT20: -71dBm11n HT40: -70dBm2.4G: 11g 54M: -76dBm11n HT20: -73dBm11n HT40: -67dBm Wireless Transmission Power CE: Wireless Features Enable/Disable Wireless Radio, WMM,Wireless Statistics WAN Failover Yes Wireless Security 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK encryptions Network Type 4G: FDD-LTE B1/B3/B7/B8/B20 (2100/1800/2600/900/800 MHz)TDD-LTE B38/B39/B40/B41 (2600/1900/2300/2500 MHz)3G: DC-HSPA+/HSPA+/HSPA/UMTS B1/B8 (2100/900MHz)

Read more less

Hikvisions wireless bridges have been developed to create network connectivity using 2 or more antennas, including for camera applications. The antennas with PoE input and output are suitable for Point-to-point and point-to-multi-point applications. Each antenna has a convenient Wi-Fi management function for local network, configuration and monitoring via WebUI, with easy installation indicators on the side. Hikvision wireless bridges offer flexible and high-quality solutions for wireless video applications. Good network equipment is essential for reliable and stable operation of a camera system. Hikvision has a wide range of switches with a focus on video applications. Various switches are available with high throughput speed, powerful PoE capabilities and optimization functions for video transmission. Available in managed and unmanaged versions, so that a suitable switch is available for every video application.The antennas are suitable for wall and pole mounting. For pole mounting, a set of plastic tie-down straps is included that can be used once. Hose clamps can also be used, but they must be ordered separately.The antennas have been developed in such a way that they only need to be properly aligned opposite each other and then they can already establish a connection. But just like any other Hikvision IP device, each antenna must first be provided with an admin password and an IP address. Clear line of sight is required for good stable operation: To function properly, the antennas must have a clear view of each other. Buildings, trees and other obstacles should be avoided. There is a signal indicator on the antennas from which the quality of the connection can be read directly. There is a signal indicator on the antennas from which the quality of the connection can be read directly. Try to place the antennas within sight of each other so that the indicator gives the highest possible indicationSpecifications:  Hardware: Interfaces: 1 × PoE RJ–45 (1000 Mbps), 1 × LAN RJ–45 (1000 Mbps) Nutrition: PoE IN: 802.3at, PoE OUT: 802.3af Included: Power adapter, antenna Ethernet ports: 2 (10/100/1000 Mbps) Reset button: 1 Energy consumption: Max. 3.6W Indicator lights: Power, LAN, Signal intensity External ports: 2 × RJ–45, 1 × ResetFeatures: Encryption: WPA-PSK, WPA/WPA2, hidden SSID Management: Syslog, NTP, Web configuration Certification: CE, FCC Network protocols: UDP, TCP, HTTPS, IPv4, NTP, DHCP TDMA: Yes, with improvementsGeneral: Range: Up to 5 km at 35° angle Temperature: -30 °C to +70 °C Humidity: 5%–95%, non-condensing Weight: 0.46 kg (gross), 0.307 kg (net) Dimensions: 132 × 228 × 91 mm (packaging), 90.8 × 57.8 × 187.8 mm (product) Assembly: Pole mounting bracket included

Read more less

Hikvisions wireless bridges have been developed to create network connectivity using 2 or more antennas, including for camera applications. The antennas with PoE input and output are suitable for Point-to-point and point-to-multi-point applications. Each antenna has a convenient Wi-Fi management function for local network, configuration and monitoring via WebUI, with easy installation indicators on the side. Hikvision wireless bridges offer flexible and high-quality solutions for wireless video applications. Good network equipment is essential for reliable and stable operation of a camera system. Hikvision has a wide range of switches with a focus on video applications. Various switches are available with high throughput speed, powerful PoE capabilities and optimization functions for video transmission. Available in managed and unmanaged versions, so that a suitable switch is available for every video application.The antennas are suitable for wall and pole mounting. A set of plastic straps that can be used once is included for pole mounting. Hose clamps can also be used, but they must be ordered separately. Point to Multipoint: This product is suitable for Point to Multipoint. This is not plug & play. This requires a web configuration. Our advice is to first configure and connect the antennas. And only install the antennas when the couplings are working. Clear line of sight is required for good stable operation: To ensure proper operation, you must use 2 antennas and they must have a clear view of each other. Buildings, trees and other obstacles should be avoided. There is a signal indicator on the antennas from which the quality of the connection can be read directly. There is a signal indicator on the antennas from which the quality of the connection can be read directly. Try to place the antennas within sight of each other so that the indicator gives the highest possible indicationSpecifications:  Hardware: Interfaces: 1 × PoE RJ–45 (1000 Mbps), 1 × LAN RJ–45 (1000 Mbps) Nutrition: PoE IN: 802.3at Included: Power adapter, antenna Ethernet ports: 2 (10/100/1000 Mbps) Energy consumption: External ports: 2 × RJ–45, 1 × Reset Indicator lights: Power, LAN, Signal intensityFeatures: Encryption: WPA-PSK, WPA/WPA2, hidden SSID Management: Web configuration, Syslog, NTP Certification: CE, FCC Network protocols: UDP, TCP, HTTPS, IPv4, NTP, DHCP TDMA: Yes, with improvementsGeneral: Range: Up to 15 km at 35° angle Temperature: -30 °C to +70 °C Humidity: 5%–95%, non-condensing Weight: 0.46 kg (gross), 0.307 kg (net) Dimensions: 132 × 228 × 91 mm (packaging), 90.8 × 57.8 × 187.8 mm (product) Assembly: Pole and wall mounting (including ty-wraps)

Read more less

The Hikvision DS-3WF0FA-5AC/O is a powerful 5GHz wireless AP bridge, ideal for outdoor applications such as CCTV and industrial environments. With an impressive wireless transmission distance of up to 1 km and a speed of 867 Mbps over the 802.11ac standard, this bridge offers excellent performance for point-to-multipont connections.General Product dimensions (W × H × D): 103.6 mm × 58.3 mm × 198.4 mm (4.1'' × 2.3'' × 7.8'') Package dimensions (W × H × D): 550 mm × 238 mm × 167 mm (21.6" × 9.3" × 6.5") Net weight: 0.3 kg (0.66 lb) Gross weight: 3.5 kg (7.71 lb) Package contents: Wireless Bridge × 1 Power adapter × 1 Power cable × 1 Regulatory and safety information × 1 Quick start guide × 1 Screw package × 1 Binding tape × 2 Antenna × 1 Packaging method: Single unit packaging Working temperature: -30°C to 60°C (-22°F to 140°F) Working humidity: 5% to 95% (no condensation) Storage temperature: -40°C to 80°C (-40°F to 176°F) Storage humidity: 5% to 95% (no condensation) Installation mode: Pole mounting Ingress protection: IP55 Power consumption: 2.65 W (typical, 1-channel 2MP IPC), Max. 4.5W Wireless Parameter Maximum air interface transmission speed: ≤ 867 Mbps Wireless standard: IEEE 802.11/a/n/ac Operating frequency range: 5150 MHz ~ 5250 MHz, 5250 MHz ~ 5350 MHz, 5470 MHz ~ 5725 MHz, 5725 MHz ~ 5825 MHz (Note: Available channels may vary depending on local regulations) Antenna gain: 10 dBi Antenna angle: (H) Beam width [3 dB] 360° (V) Beam width [3 dB] 8° Transmit power: 22 dBm @11ac MCS0 (Note: Transmit power may vary depending on local regulations) Receiving sensitivity: -84±2 dBm @AC80-MCS0 Throughput speed: PTP: 160Mbps/0.5KM (AC80), 160Mbps/1KM (AC80) PTMP (1 to 8): 110 Mbps/1 KM (AC80) PoE power supply: PoE port: PoE IN/LAN 1 PoE distance: 100 m Hardware Parameters Network interface: 2 × 1000 Mbps RJ45 ports LED indicator: Power indicator LAN indicator Signal intensity indicator Reset: Hardware reset button Power supply: 48V 0.33A PoE or PoE(802.3af) 36～57V 0.13A Software Function Application functions: TDMA, DFS, TPC, IFM, IPM Channel width: 20/40/80 MHz Channel selection: Auto/manual selection Network Protocol: NTP (Network Time Synchronization) SADP (automatic IP address search) HTTPS (web management) SSH (debugging) Security mode: WPA2-PSK Security mechanism: Wireless network name hidden Management method: Web, iVMS-4200, HCP Upgrade: Web, iVMS-4200, HCP System Log: Syslog, Control Center Information

Read more less