JA-110C PIR with photo camera

Description

Jablotron JA-110C PIR with photo camera

 

The JA-110C PIR with photo camera is used to take photos of a monitored area and transmit them to the control panel of the JABLOTRON 100 security system.

Taking a photo is activated either by the activation of a PG output, or by a request to take a photo from the MyJABLOTRON Web Self-Service, or by another detector (by means of PG activation). This setting is supplemented by an optional function that continuously takes photos and stores them temporarily. They are deleted later if no activation of the detector occurs. If at any time activation of the detector occurs, a number of pre-activation photos are saved and post-activation photos are taken and also stored in memory, with a pre-selected number of photos taken during and after activation of the detector. The camera is equipped with infrared auxiliary lighting. The camera's ambient lighting sensor can activate a PG output in the system (this can be used, for example, to switch on an external IR auxiliary light). The camera is monitored and protected against tampering by means of a tilt detector. For outdoor use, when there is a risk of direct contact, an additional protective housing is recommended. The camera occupies one position in the system.

Specifications;
Power supply via the control panel bus 12 V (9 - 15 V)
Power consumption (idle mode/with additional IR lighting) 15 mA/150 mA
PIR detection angle of the camera 75°
Range of the additional IR lighting max. 12 meters
Camera resolution LQ 320x240; HQ 640x480 pixels
Environment according to EN 50131-1, IV. outdoor, general
Operating temperature range -20 to +60°C, max. humidity 75%
Ingress protection class IP65
Dimensions 155 x 75 x 55 mm
Classification level 2 In accordance with EN 50131-1, EN 50131-3
In accordance with EN 50130-4, EN 55022, EN 50581

JA-110C PIR with photo camera

Product form

In stock, delivery time 1 to 3 working days

€214,97 Incl. VAT

      • Free shipping from €99
      • Free returns within 30 days

      Associated products

      Description

      Jablotron JA-110C PIR with photo camera

       

      The JA-110C PIR with photo camera is used to take photos of a monitored area and transmit them to the control panel of the JABLOTRON 100 security system.

      Taking a photo is activated either by the activation of a PG output, or by a request to take a photo from the MyJABLOTRON Web Self-Service, or by another detector (by means of PG activation). This setting is supplemented by an optional function that continuously takes photos and stores them temporarily. They are deleted later if no activation of the detector occurs. If at any time activation of the detector occurs, a number of pre-activation photos are saved and post-activation photos are taken and also stored in memory, with a pre-selected number of photos taken during and after activation of the detector. The camera is equipped with infrared auxiliary lighting. The camera's ambient lighting sensor can activate a PG output in the system (this can be used, for example, to switch on an external IR auxiliary light). The camera is monitored and protected against tampering by means of a tilt detector. For outdoor use, when there is a risk of direct contact, an additional protective housing is recommended. The camera occupies one position in the system.

      Specifications;
      Power supply via the control panel bus 12 V (9 - 15 V)
      Power consumption (idle mode/with additional IR lighting) 15 mA/150 mA
      PIR detection angle of the camera 75°
      Range of the additional IR lighting max. 12 meters
      Camera resolution LQ 320x240; HQ 640x480 pixels
      Environment according to EN 50131-1, IV. outdoor, general
      Operating temperature range -20 to +60°C, max. humidity 75%
      Ingress protection class IP65
      Dimensions 155 x 75 x 55 mm
      Classification level 2 In accordance with EN 50131-1, EN 50131-3
      In accordance with EN 50130-4, EN 55022, EN 50581

      Recently viewed products

        Returns & Delivery

        When will my order be delivered?

        We ship worldwide. Your order will be packaged really carefully and delivered wherever you want. Delivery takes between 2-4 business days. You will receive an e-mail after ordering with more information about the delivery.

        Can I return my product?

        Orders can be returned or exchanged within 30 days of receiving the parcel, providing they are in original resalable condition.

        What can I do if my item (or part of it) is damaged?

        We work hard to deliver your items without damage. Orders can be returned or exchanged within 30 days of receiving the parcel, providing they are in original resalable condition.

        © 2025 Alarma-Total.es, Powered by Shopify

        • American Express
        • Apple Pay
        • Google Pay
        • iDEAL
        • Klarna
        • Maestro
        • Mastercard
        • PayPal
        • Shop Pay
        • Union Pay
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create a free account and enjoy many benefits.