JA-113A-BASE-RB BUS external siren base

Description

General

  • Type: JA‑113A‑BASE-RB (bus external siren basic module) 

  • Function: Basic unit for communication with the control panel and a number of internal functionalities such as tamper detection, can be combined with optional covers for acoustic and optical alarm display 

Technical specifications

  • Connection: 12 V DC via BUS system (range 8–15 V) with average current consumption approx. 2.5 mA (stand-by) up to max. 450 mA

  • Backup battery (optional, not included as standard): NiMH 4.8 V / 1,800 mAh (BAT‑4V8‑LH1800) with typical service life approx. 5 years. Low voltage detection < 4.6 V is supported

  • Siren output: piezo element with ~100 dB at 1 m (hanging new battery) 

Dimensions & weight

  • Dimensions: 200 × 300 × 72 mm (with JA-1X1A-C cover) or 200 × 300 × 62 mm (with JA-1X2A-C cover) 

  • Weight: ± 413 g without battery 

Environmental and certification

  • Use: for outdoor installation, ambient temperature from −25 °C to +60 °C and humidity up to ~75 % RH without condensation

  • Security class: Grade 2 / environmental class IV according to EN 50131‑1, EN 50131‑4 certification.

Installation

  • Assembly: use two screws through mounting holes, built-in spirit level for accurate alignment 

  • Bus connection: always install with the power off, guide the cable through the appropriate opening and secure it with clips 

  • Tamper surveillance: sensor detects opening of the front cover — automatic calibration after installation, closure must be complete to avoid error messages 

Compatibility

  • System compatibility: works with JABLOTRON 100 and 100+ control panels such as JA-102K, JA-103K and JA-107K 

  • Required cover: becomes the basic unit supplied without cover; these must be purchased separately. Available COVERS:

    • JA‑1X2A‑C‑WH (white plastic, transparent flash)

    • JA‑1X2A‑C‑GR (gray plastic)

    • JA‑1X2A‑C‑AN (anthracite plastic)

    • JA‑1X1A‑C‑ST (red LED on stainless steel)

    • JA‑1X1A‑C‑ST‑B (blue LED on stainless steel)


JA-113A-BASE-RB BUS external siren base

Product form

In stock, delivery time 1 to 3 working days

€127,05 Incl. VAT

      • Free shipping from €99
      • Free returns within 30 days

      Description

      General

      • Type: JA‑113A‑BASE-RB (bus external siren basic module) 

      • Function: Basic unit for communication with the control panel and a number of internal functionalities such as tamper detection, can be combined with optional covers for acoustic and optical alarm display 

      Technical specifications

      • Connection: 12 V DC via BUS system (range 8–15 V) with average current consumption approx. 2.5 mA (stand-by) up to max. 450 mA

      • Backup battery (optional, not included as standard): NiMH 4.8 V / 1,800 mAh (BAT‑4V8‑LH1800) with typical service life approx. 5 years. Low voltage detection < 4.6 V is supported

      • Siren output: piezo element with ~100 dB at 1 m (hanging new battery) 

      Dimensions & weight

      • Dimensions: 200 × 300 × 72 mm (with JA-1X1A-C cover) or 200 × 300 × 62 mm (with JA-1X2A-C cover) 

      • Weight: ± 413 g without battery 

      Environmental and certification

      • Use: for outdoor installation, ambient temperature from −25 °C to +60 °C and humidity up to ~75 % RH without condensation

      • Security class: Grade 2 / environmental class IV according to EN 50131‑1, EN 50131‑4 certification.

      Installation

      • Assembly: use two screws through mounting holes, built-in spirit level for accurate alignment 

      • Bus connection: always install with the power off, guide the cable through the appropriate opening and secure it with clips 

      • Tamper surveillance: sensor detects opening of the front cover — automatic calibration after installation, closure must be complete to avoid error messages 

      Compatibility

      • System compatibility: works with JABLOTRON 100 and 100+ control panels such as JA-102K, JA-103K and JA-107K 

      • Required cover: becomes the basic unit supplied without cover; these must be purchased separately. Available COVERS:

        • JA‑1X2A‑C‑WH (white plastic, transparent flash)

        • JA‑1X2A‑C‑GR (gray plastic)

        • JA‑1X2A‑C‑AN (anthracite plastic)

        • JA‑1X1A‑C‑ST (red LED on stainless steel)

        • JA‑1X1A‑C‑ST‑B (blue LED on stainless steel)


      Recently viewed products

        Returns & Delivery

        When will my order be delivered?

        We ship worldwide. Your order will be packaged really carefully and delivered wherever you want. Delivery takes between 2-4 business days. You will receive an e-mail after ordering with more information about the delivery.

        Can I return my product?

        Orders can be returned or exchanged within 30 days of receiving the parcel, providing they are in original resalable condition.

        What can I do if my item (or part of it) is damaged?

        We work hard to deliver your items without damage. Orders can be returned or exchanged within 30 days of receiving the parcel, providing they are in original resalable condition.

        © 2025 Alarma-Total.es, Powered by Shopify

        • American Express
        • Apple Pay
        • Google Pay
        • iDEAL
        • Klarna
        • Maestro
        • Mastercard
        • PayPal
        • Shop Pay
        • Union Pay
        • Visa

        Login

        Forgot your password?

        Don't have an account yet?
        Create a free account and enjoy many benefits.