Jablotron accessories
-
Jablotron JB-118N Pro Bus signal PG output module – 8 outputs
JB-118N Pro Bus signal PG output module – 8 outputs Key features: The product is a system device for the Jablotron Midway (Pro) and Essex (Pro) The outputs are isolated from the bus It is set using the DIP switch The device is not addressable (it does not occupy a position in the security system)
€119,88
-
Jablotron JA-159J, Pro Wireless Doorbell
JA-159J, Pro Wireless DoorbellKey features: The product is a wireless system device for the Jablotron Midway Pro and Essex Pro Button activation allows you to use the wireless calling function, activate an emergency alarm or control devices The product occupies one position in the system
€59,00
-
Jablotron JA-112M, Bus module for magnetic contacts, 2 inputs
JA-112M, Bus module for magnetic contacts, 2 inputs Up to 100 m of wiring can be connected to each input Inputs can be connected without balancing They can be individually or dual balanced and can be connected to a roller blind switch function The module allows to invert the input or set the minimum activation time to enable the alarm (from 0.1 s to 300 s) The detector communicates with the control panel bus and is powered by this bus The detector is addressable and occupies two positions in the security system
€49,51
-
Jablotron JB-111N BUS signal output module PG
Jablotron JB-111N BUS signal output module PGThe Jablotron JB-111N BUS signal output module PG is designed to provide a changeable output delay (8 A) with a NO or NC setting. An appropriate PG output is controlled via DIP switches (controls 1 of 32 different DIP switches). The module communicates and is powered via the bus connection to the control panel. The JA-111N can be installed in the JA-190PL housing. This module does not occupy any additional space in the zone file.• Power supply: via the BUS of the central unit, 12V (9 - 15 V)• Power off power consumption: 5 mA• On power consumption: 25 mA• Maximum load of the relay output: maximum 1 A/30 V DC• Minimum switching current: 10 mA • Environment in accordance with EN 50131-1, EN 50131-3: II, indoor• Operating temperature: -10 to 40 °C
€74,29
-
Jablotron JA-194Y, GSM 4G dialer for the JA-103K/107K
Main features:- 4G Chooser for the Jablotron 103K and 107K systems- Power source for the module 9-15 V DC (from the control panel)- Average power consumption 9 mA (depending on GSM signal strength)- Current power consumption 720 mA- 2G (GSM, EDGE) 900/1800 MHz GSM communication band- 3G 900/2100 MHz (B8, B1) GSM communication band- 4G (LTE) 800/900/1800/2100/2600 MHz (B20,B8,B3,B1,B7) GSM communication band- I&HAS classification Safety grade 2/Environmental class II- Dimensions/weight 70mm x 37mm x 25mm/23gr.- Operational environment General solution for internal use- Operating temperature -10°C to +40°C- Average operating humidity 75% RH, non-condensing- Compatible with RMT (ARC Receiver) According to communication protocols
€498,48
-
AlarmsysteemExpert.nl Alarm cable 4-core 4 x 0.22mm roll 100 m
Alarm cable 4-core 4 x 0.22mm roll 100 m 4 core alarm cable. For installing security systems, Color coding for easy installations 100 meters on roll 4 x 0.22mm. Nominal resistance 94.6 Ohms Flexible security cable 4x0.22 Supplied in box: 100 meters Equipped with tear thread Color code: White, Red, Yellow, Green Cores: 100% copper, tinned Core resistance: 94.6 Ohm/Km Core insulation: PVC TI1 TM1 Jacket: White, PVC Type 6 CPR classification: Eca
€49,00
-
Jablotron JA-196J Double RFID access tag
JA-196J Double RFID access tag RFID frequency (125 kHz), MIFARE frequency (13.56 MHz)
€14,99
-
Jablotron PLV-P-ST universal round ceiling mounting bracket
PLV-P-ST universal round ceiling mounting bracket Key features: Universal circular spacer for the ceiling, for smoke and temperature detector Used for smoke detectors and for PIR ceiling detectors. In both cases the device is suitable for the bus option as a base, under which the bus wiring can be easily hidden In the case of base wireless detectors, this separates the antenna from the mounting surface and potentially improves signal range
€7,90
-
Jablotron JB-161N-PLUG, smart socket with indication LED
Smart, wireless, two-way communicating plugs represent a completely new solution for automation within the JABLOTRON 100+ system. The plug copies the selected PG output.
€149,33
-
AlarmsysteemExpert.nl Alarm cable 8-wire 8 x 0.22mm roll 100 m
Alarm cable 8-wire 8 x 0.22mm roll 100 m 8 core alarm cable (shielded), For installing security systems, Color coding for easy installations 100 meters on roll 8 x 0.22mm. Nominal resistance 94.6 Ohms
€69,00
-
Jablotron PLV-CP-L, housing size JA-106 / JA-83
PLV-CP-L, housing size JA-106 / JA-83 This empty central unit can be used as a dummy or to place your connection modules Specifications: Dimensions 357 x 297 x 105mm Weight 1400g General indoor environment Operating temperature range -10 °C to +40 °C Average operating humidity 75% RH, non-condensing Meets T 034 (when connected with JA-111H TRB module) Recommended screw 4 x ø 4.5 x 50 mm
€90,02
-
Jablotron JA-152J-MS II, Remote Control, 2 Button MultiSystem
The Jablotron JA-152-MS provides remote control of the security system, plus various electrical devices, or the activation of an emergency alarm. Confirmation of the execution of an order through optical and acoustic feedback. The remote control can also be registered on a multifunction relay of the AC-16x series, to control a relay according to the selected mode. The control is equipped with both optical and acoustic indication of the execution of a command. The operation can be registered on multiple systems or multi-function relays. It checks the battery status and indicates if the battery is empty. If a key is held down, an activation is sent every second. This function can be used, for example, to send the impulse from a PG output (e.g. gradual closing of roller blinds). The sound of the keys can be switched off. The keypad lock function. Extensive settings for double pressing the keys. The control is a device of the JABLOTRON 100+ system, is addressable and occupies one position in the system. Specifications: Compatible with FW of the module JA-11xR LR6x613+FW of the control panel LJ(MD)60416+F-Link 1.4.0+ Power 1 x Lithium battery type CR 2032 (3.0 V/0.2 Ah)(Type C power source according to EN 50131-6) Power consumption Nominal consumption 1.1 μA Maximum consumption 33mA Low battery voltage detection ≤ 2.2V Typical battery life approx. 2 years (10 activations/day) Communication frequency 868.1 MHz, JABLOTRON protocol Maximum radio frequency output (ERP) 1.2mW RF rangeapprox 100 m (line of sight) Sizes 63 x 36 x 15 mm Weight (without batteries) 32g Classification Safety grade 2/Environmental class II(According to EN 50131-10) Environment General solution for internal use Operating temperature range -10°C - +40°C Average humidity 75% RH, non-condensing Number of unique production codes > 1 million Certification body Trezor Test s.r.o. (no. 3025) Moreover, in accordance with ETSI EN 300 220-1,-2, EN 50130-4, EN 50130-4, EN 550, EN 62368-1, EN 50581, EN 50131-1, EN 50131-3, EN 50131-5-3, EN 50131-6 Can be operated according to ERC REC 70-03
€86,66
-
Jablotron JA-191Y LTE, GSM 4G dialer for Jablotron 100, 101 and 106
JA-191Y LTE, GSM 4G dialer for Jablotron 100, 101 and 106The LTE-4G GSM module is intended for use with the JA-100K, JA-101K and JA-106K alarm control panels of the JABLOTRON 100+ series.
€474,73
-
Jablotron JA-194PL Mounting box large
JA-194PL Mounting box largeSupported modules: JA-121T, JA-118M, JA-114HN, JA-116H, JA-110Z, JA-110N, JA-111N, JA-150N, JA-151N, JA-118N, ...Product Info
€35,08
-
Jablotron JA-118M BUS module for magnetic detectors - 8 inputs
Jablotron JA-118M BUS module for magnetic detectors - 8 inputsThe Jablotron JA-118M BUS module for magnetic detectors - 8 inputs is specially designed for connecting magnetic detectors. Installation in a JA-190PL universal multifunction box is recommended (or in a universal box).• Power supply via BUS 12 V (9 ... 15 V)• Power consumption in standby 5 mA• Consumption for cable selection 15 mA• Dimensions 50 x 38 x 14 mm• Class 2 according to EN 50131-1, EN 50131-3• Operational environment according to EN 50131-1: II• Operating temperature -10 to +40 ° C• Also complies with EN 50130-4, EN 55022
€128,11
-
Jablotron BAT-3V6-N170
BAT-3V6-N170Back up battery for the JA-150A
€5,60
-
Jablotron Alarm cable AC-6-001 per meter
Jablotron Alarm Cable AC-6-001 per meter Jablotron Alarm Cable AC-6-001 per meter installation cable for alarm systems per meter.6 core alarm cable (unshielded), For installing security systems, Color coding for easy installations, per meter Specifications: Cable: 6 color wires Conductors: stranded copper 7 x 0.18 mm Max. voltage: 60 Vrms Max. current : 1 A per core Max. resistance: 92.4 ?/km Max. temperature: 70°C Insulation: 0.2 mm PVC Jacket: 0.5 mm PVC
€0,60
-
Jablotron BH-80A, Alkaline battery holder for JA-80A and JA-180A
BH-80A, Alkaline battery holder for JA-80A and JA-180A Batteries can be purchased separately here:Batteries In the Bra-80A battery holder can accommodate 5 regular alkaline batteries of the 1.5V type (LR14).
€7,99
-
alarmsysteemexpert Jablotron DE06-12 Power supply12V / 0.5A
Jablotron DE06-12 Power supply12V / 0.5A The Jablotron DE06-12 Power Supply12V / 0.5A is intended for powering wireless control panels and also for powering other 12V DC devices such as intercom outdoor stations, electric strike plate, IP and Analog 12volt cameras The compact dimensions of the housing allow the module to be placed in a standard electrical installation box for concealed installation under wall-mounted Jablotron products, such as the elements mentioned above. The screw holes for M3 screws are also useful for installation in typical fuse/switches where mounting is required.• supply voltage 100 ~ 240VAC, class protection II• output voltage 12V DC (± 2%)• output current 500 mA• peak output current T • output power 12W max.• protection against short circuit and overload• housing IP64• dimensions 50x48x25 mm• input cables length 110 mm (230 V), diameter 1.3 mm (16 AWG)• operating conditions according to EN 50131-1 II. environmental class• working temperature -10 ° C to +40 ° C• complies with EN 50130-4, EN 55022, EN 60950-1
€22,90
You have 67 of the 67 products seen