Jablotron modules
Jablotron modules
-
Jablotron JA-150G-CO Wireless module for Ei208W CO detector
JA-150G-CO Wireless module for Ei208W CO detector The JA-150G-CO is a plug-in module for direct installation in an autonomous CO detector, which enables wireless connection to the JABLOTRON 100 system. This transmits the alarm information, detector activation and detector battery status to the control panel.He occupies one position in the system. Thanks to this print you can wirelessly connect the CO detector in the building with the Jablotron 100 system.The PCB fits easily into the housing and can use the CO detector's battery for power. Product Info
€57,79
-
Jablotron JA-116H BUS expander - 16 inputs
Jablotron JA-116H BUS expander - 16 inputsThe Bus expander is an expansion module used to drive and connect up to 16 sensors with contact outputs . This extension makes it possible to connect Jablotron and non-Jablotron related products such as infrared sensors, fire detectors or other detectors. This module can be installed directly in the control panel housing (JA-101K(R) and JA-106k(R).
€202,41
-
Jablotron JA-151N Wireless signal output module PG
Jablotron JA-151N Wireless signal output module PGThe Jablotron JA-151N Wireless signal output module PG is a wireless PG power module (1 A/12/24 V DC required). It copies the status of a selected PG output of the JA-100 system (PG1 to PG32).A specific PG output can be selected via the printed circuit board with 5 DIP switches. This module does not occupy a position in the JA-100 system.• Power supply 12 - 24 V DC, not included as standard • Output relay load: max. 1 A/30 V DC• 1 PG output: 3 x terminals C, NC, NO• Environment according to EN 50131-1, EN 50131-3: II, internal• Operating temperature -10 to + 40 ° C
€123,81
-
Jablotron JA-110T BUS short circuit isolation module
Jablotron JA-110T BUS short circuit isolation moduleThe Jablotron JA-110T BUS short circuit isolation module is designed to separate and protect unprotected parts of the BUS wiring. It is powered by the BUS from the control panel. It can be installed in a JA-190PL housing. It is not possible to assign it a zone (it does not occupy a position in the alarm system).Product Info
€62,10
-
Jablotron JA-121T Converter module
Jablotron JA-121T Converter module The Jablotron JA-121T module is a universal converter to RS-485 for other systems. It synchronizes the transfer from the JABLOTRON 100 system bus to the RS-485 serial line and back.Used, for example, to connect to an intelligent home. Contains galvanic isolation circuits sized for a test voltage of 4 kV. The data is sent when the status changes or on request. In passive mode, all data is sent only on request. The module is addressable and occupies one position in the system.
€450,00
-
Jablotron JA-190PL Multifunctional installation housing
Jablotron JA-190PL Multifunctional installation housingThe Jablotron JA-190PL Multifunctional installation housing can be used for various modules of the JA-100 system.Product Info
€5,37
-
Jablotron JA-110I BUS section / output PG activation indicator
Jablotron JA-110I BUS section / output PG activation indicatorThe Jablotron JA-110I BUS section / output PG activation indicator indicates activation of a zone (SET) or of a PG output (1-32) by a red LED.It is connected to the exchange by a BUS. It is not possible to assign him a zone. (it does not occupy a position in the alarm system.• LED ON power consumption: 5 mA• LED OFF power consumption: 2 mA
€40,11
-
Jablotron JA-192PL-A Multifunctional installation box
Jablotron JA-192PL-A Multifunctional installation box The Jablotron JA-192PL-A Multifunctional installation box for outdoor use.Product Info
€17,33
-
Jablotron JA-111I Universal LED indicator RGB
Jablotron JA-111I Universal LED indicator RGB The Jablotron JA-111I Universal LED indicator RGB indicates activation of a zone (SET) or of a PG output (1-32) by a multi-colored LED (red, green, blue and yellow). Product Info
€24,78
-
Jablotron JA-120Z BUS extender 500m
JA-120Z BUS extender 500m Suitable for current stimulation of the bus, extension of the line length and galvanic isolation of the bus.The JA-120Z extends the BUS line by no less than 500m per terminal. 3 modules can be placed in series, allowing a total of 2000m to be bridged. The kit consists of: a circuit board for the JA-120Z module and a JA-83PWR power source. The backup battery and plastic housing must be purchased separately.* Output current max. 2A* 2 independent bus output terminals – each provides 500 m bus lengthThe product is offered as an electronic module with power supply unit JA-83PWR. We recommend installing the product in a plastic housing PLV-CP-L. The product is a component of the JABLOTRON 100 system, is addressable and occupies one position in the system.* The galvanic isolation of the output terminals serves for different ground potentials and the protective insulation of the bus* Up to 3 boosters can be arranged in series* Backup battery up to 18 Ah
€557,27
-
Jablotron JA-110Z-C BUS connection module
Jablotron JA-110Z-C BUS connection moduleThe Jablotron JA-110Z-C BUS connection module is designed to join BUS wires in the JA-100 system and can be installed in the JA-190PL housing.Product Info
€9,51
-
Jablotron JA-190Y GSM dialer
Jablotron JA-190Y GSM dialer The GSM communicator module is designed for the JA-100K and JA-100KR alarm control panels. It serves as a backup and extension of the LAN communicator, which is part of the control panel. When installed, it increases the reliability of data transfer to the JABLOTRON CLOUD and to the monitoring stationThe JA-190Y communicator makes it possible:– To operate the system via a voice menu– To report events directly to a mobile phone (SMS and voice messages) from the control panel
€408,71
-
Jablotron JA-111R Radio module
Jablotron JA-111R Radio module The radio bus module JA-111R is used to connect all wireless devices of the JABLOTRON 100 system. To perfectly cover the monitored area, up to 3 JA-111R modules can be installed in a system.The electronic unit is installed in the front part of the lid and is equipped with a retractable terminal board, which allows easy connection of the cables. In the rear part there are breakable holes for cables.The module communicates with the control panel bus and is powered by this bus. The module is designed for mounting outside the control panel and is used as the second or third panel in the system. If you need a radio module in the control panel, we recommend that you purchase a control panel with a radio module - the unit JA-10xKR-xxCompatible with: F-Link 1.4.0 or higherPower supply: via the control panel bus: 12 V (9…15 V)Consumption of backup (standby) mode: 25 mACurrent consumption (maximum) for cable selection: 25 mACommunication frequency: 868.1 MHzDimensions: 43 x 160 x 23 mm Classification: safety grade 2, In accordance with EN 50131-1, EN 50131-3Environment: II. indoor, general, in accordance with EN 50131-1Operating temperature range: -10 °C to +40 °CThis also meets the requirements of: ETSI EN 300 220, EN 50130-4, EN 55022, EN 60950-1Operating conditions: ERC REC 70-03
€331,01
-
Jablotron JA-150N Wireless power module PG
Jablotron JA-150N Wireless power module PGThe Jablotron JA-150N Wireless power module PG is a wireless PG power module (10 A/230 V AC). It copies the status of a selected PG output from the JA-100 system (PG1 to PG 32).• Power 0.5 W at 230 V AC• Output relay load: 16 A/250 V• 1 PG output: 3 x terminals C, NC, NO• Environment according to EN 50131-1, EN 50131-3: II, internal• Operating temperature -10 to + 40 ° C
€128,11
-
Jablotron JA-120N Module for opening the electric locks
Jablotron JA-120N Module for opening the electric locks Batteries are installed in the Jablotron JA-120N module, which provide the initial current impulse for opening the electric locks. JA-120N can be used anywhere, where it is difficult to install an external power source for using electric locks. The module responds to the PG output (freely programmable outputs) of the control panel, or can be activated using a button connected to the IN input (this can optionally be blocked by locking the section). The module is addressable and occupies one position in the system.
€117,53
-
Jablotron JA-110G-CO Connection module
Jablotron JA-110G-CO Connection module The Jablotron JA-110G-CO Connection Module is a plug-in module intended for direct installation in an autonomous Ei208W or Ei208DW CO detector, which allows the connection of the bus to the JABLOTRON 100 system. Product Info
€45,59
-
Jablotron JA-110Z-B BUS connection module
Jablotron JA-110Z-B BUS connection moduleThe Jablotron JA-110Z-B BUS connection module is designed to join BUS wires in the JA-100 system and can be installed in the JA-190PL housing.Product Info
€12,37
-
Jablotron AC-160-DIN Multifunction relay
Jablotron AC-160-DIN Multifunctional relay The Wireless AC-160-DIN Multifunction Relay is a component of the JABLOTRON 100 system, but can also be installed as a stand-alone device without linking to a control panel.It offers a switching contact relay with galvanic isolation and safety for switching 230 V / 16 A current loads. The relay can respond to the status of control panel PG outputs or for the activation of devices of the JA-15x series with uni-directional communication, read directly into the relay. The response can be selected from five modes - the standard NATURAL function (extended copy), IMPULSE, STATUS CHANGE, SWITCH OFF and BLOCK. The relay also has a button for immediate manual status change. Allows you to update the firmware via a USB port. It is designed to be mounted on a DIN rail.
€165,06
-
Jablotron JA-110Z Connection module
Jablotron JA-110Z Connection module The Jablotron JA-110Z Connection Module is designed for branching the bus of the JABLOTRON 100 system. It is protected from attack by a pair of tamper contacts. It is supplied in a suitable flush-mounted box JA-190PL.The contact module also contains 2x4 terminal boards, which are connected in parallel and allow independent branches to be interconnected. He occupies one position in the system.
€45,59
-
Jablotron UR-01 Multifunctional relay
Jablotron UR-01 Multifunctional relay You can store the Jablotron UR-01 Multifunction Relay in your tool bag to help you solve many tasks.It is equipped with switching contacts with galvanic and safety isolation for switching a load of 230VAC/16A, which can be used in one of eight selectable modes. The relay is designed for mounting on a DIN rail and its characteristics are set using switches under a cover.It offers 8 functions:* Switching relay – Standard NO/NC relay* Bistable relay – for example for lighting control from multiple locations using buttons* Bistable relay with time limitation – for example to control lights from multiple places (however the light will not be on for longer than the set time)* Delayed shutdown - for example for fan run-off* Delayed start – starting an electric motor in star - delta mode.* Impulse through leading edge – activation of a device for a certain time* Impulse via rear flank – for example to switch on a fan after switching off the lights* Regular impulses – at a fixed interval this will activate a device for a period of 10 minutes - for example for the regular heating of a heating element in the bathroom
€130,92
-
Jablotron AC-160-C wireless multi-function power relay, built-in model
Jablotron AC-160-C wireless multifunctional power relay, built-in modelThe relay can also be installed as a standalone device, responding to the activation of, for example, unidirectional wireless detectors of the JA-15x series. In this case, the relay is activated according to the mode selected for the respective detector (choice of 5 modes: extended copy, impulse, status change, shutdown and blocking). It provides a switching contact relay with galvanic and safety isolation for switching a current load of 230V/16A. He occupies one position in the system. Nominal supply voltage 100-230 V, 50-60 HzInternal energy consumption at 230 V AC (min / max) 0.2 W / 0.7 WOperating frequency 868.1 MHz, Jablotron protocolAntenna internalContact load capacity – protection class II Max. switched voltage 250 V ACResistive load (cosφ=1) max. 16 A Inductive, capacitive load (cosφ=0.4) max. 8 AHalogen lighting max. 1000 W Minimum switching DC power supply 0.5 WDiameter of the connected conductors max. 2 x 1.5 mm2; max. 1 x 2.5 mm2Ingress protection class IP20Dimensions 49 x 49 x 26 mmOperating temperature range -10 °C - + 40 °C, RH 75% non-condensingIn accordance with ETSI EN 300 220-1, EN 50130-4, EN 55022, EN 60950-1Operating conditions ERC REC 70-03
€152,90
-
Jablotron JA-110N-DIN BUS DIN current output power module
Jablotron JA-110N-DIN BUS DIN current output power moduleThe Jablotron JA-110N-DIN BUS DIN current output power module is designed for a DIN rail. The module supplies power to the relay output. It can be used, for example, to control lights, fans, etc. The relay output is programmable via the control panel.• Power supply 12 V bus (9 ... 15 V)• Power consumption during backup (relay open / closed) 5 mA / 45 mA• Power consumption for cable selection 45 mA• Rating relay (galvanically isolated) - Class II:• Maximum switching voltage 250 V AC / 24 V DC• Resistive load (PF = 1) max.16• Inductive, capacitive load (PF = 0.4) max 8A• Halogen lighting max. 1000 W DC 384 W• Minimum DC switching 0.5W• Twisted wires 2 x 1.5 mm2 max 1 x 2.5 mm2• Dimensions 18 x 90 x 64 mm• General indoor environment• Temperature, -10 To + 40 ° C• Housing IP-20• Complies with EN 50130-4, EN 55022, EN 60950-1 DIN rail EN60715
€119,89
-
Jablotron JA-114HN BUS connection module with 4 inputs and outputs
Jablotron JA-114HN BUS connection module with 4 inputs and outputsA bus module, containing four wired inputs with adjustable EOL resistance values, four galvanically isolated signal PG outputs and an additional power supply, protected by an electronic fuse. In addition to the EOL type resistor, the values of resistors can also be set for the inputs. The outputs are designed as galvanically isolated units (two each have a common C terminal). The module occupies four positions in the control panel and is equipped with one tamper sensor at the front and one at the back.It is especially suitable for the renewal of wired alarms, where old detectors are used. They are also very commonly used to control multiple devices through the PG outputs. The auxiliary power supply makes it possible
€202,41
-
Jablotron GS-208-CO Connection module
Jablotron GS-208-CO Connection module The Jablotron GS-208-CO Connection Module is a plug-in module intended for direct integration into the autonomous Ei208W or Ei208DW CO detector, allowing the wired connection of the bus to a protection unit or other system.The module provides galvanic isolation of the wired output of the entire detector. It provides the control panel with information about alarms and detector faults. Product Info
€49,51
You have 24 of the 37 products seen