In addition to standard positioning in a corner of a room, it can be installed on a wall surface using a mounting box JA-196PL-S, where the detector is partially recessed and forms an elegant whole with the wall. The hinge holder JA-191PL can be used for special applications such as ceiling mounting or oblique detection angle.
The detector is equipped with impulse activation.
The detector can be used to control programmable PG outputs.
False alarm resistance can be set to two levels.
The detector offers standard resistance to white light at the level prescribed by the standard (up to 6000 lux).
The detector is addressable and occupies one position in the security system.
| Compatible with |
F-Link 2.0.0 and higher |
| Power source |
1x lithium battery, CR123A (3 V / 1500 mAh) |
| Typical lifespan |
4 years (in Smartwatch mode) |
| Communication frequency |
868.1MHz |
| Communication range |
approx. 300 m (free terrain) |
| Recommended installation height |
2.2 – 2.5 m above floor level |
| Detection angle / detection range |
90° / 12 m |
| Sizes: |
62 x 110 x 40mm |
| Classification |
safety level 2/environmental class II, in accordance with EN 50131-1 ed. 2+A1+A2, EN 50131-2-2 |
| Environment according to |
EN 50131-1 II. indoor, general |
| Operational temperature range |
-10 °C to +40 °C |
| This also meets the requirements of |
EN 50131-5-3+A1, EN 50131-6 ed. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581 |
