Fire Prevention

38 products

  • Sale -33% Nedis Nedis DTCTBR10, Detector holder, Self-adhesive, magnetic Nedis Nedis DTCTBR10, Detector holder, Self-adhesive, magnetic

    Nedis DTCTBR10, Detector holder, Self-adhesive, magnetic

    In stock, delivery time 1 to 3 working days

    DTCTBR10, Detector holder, Self-adhesive, magneticThe self-adhesive mounting plates for smoke detectors are easy to install in less than a minute. Drilling holes in the ceiling is no longer necessary.• Diameter: 70mm• Adhesive strip: 3M• Capacity: Max. 900gSpecifications: Material Metal Color Metal Accessories Self-adhesive Tape  

    In stock, delivery time 1 to 3 working days

    €8,90 €5,99

  • Alecto Alecto BS075 Brandblusspray 750 ml – PFAS-vrij

    Alecto BS075 Fire Extinguishing Spray 750 ml – PFAS-free

    In stock, delivery time 1 to 3 working days

    The Alecto BS075 is a compact, PFAS-free fire extinguishing spray designed for quick action against small, incipient fires. Thanks to its convenient 750-ml size, you can easily store the spray in your kitchen, car, trailer, RV, boat, garage, or workshop. Safety advice: Use the fire extinguisher spray only on small, manageable fires, and always keep an escape route clear. If you are unable to extinguish the fire immediately, leave the area and call 112.Suitable for solid materials and cooking oilThe BS075 has a fire rating of 5A 5F and is suitable for fire classes A and F. This means the spray can be used on fires involving solids, such as paper and wood, and on small fires involving cooking oil. The clear instructions on the label help you act quickly in an emergency.Advantages of the Alecto BS075 Compact fire extinguisher spray with a 750 ml capacity PFAS-free extinguishing agent Suitable for fire classes A and F Extinguishing rating 5A 5F Ready to use immediately and intuitive to operate Spray range of up to approximately 4 meters and a specified spray duration of approximately 25 seconds Complies with EN 3 and has a vehicle type approval Leaves significantly less residue than a powder extinguisher Specifications Model BS075 Capacity 750 ml Fire Rating A and F Extinguishing Rating 5A 5F Pressure 10 bar Dimensions 74 × 312 × 74 mm Weight Approximately 955 grams Freeze-resistant No EAN 8711902079590 Check the expiration date and the condition of the can regularly. Always replace the fire extinguisher spray after it has been used.

    In stock, delivery time 1 to 3 working days

    €19,99

  • Alecto Alecto Poederblusser – 1, 2 of 6 kg Alecto Alecto Poederblusser – 1, 2 of 6 kg

    Alecto Powder Fire Extinguisher – 1, 2, or 6 kg

    In stock, delivery time 1 to 3 working days

    The Alecto powder fire extinguisher is a powerful, ready-to-use fire extinguisher for fire classes A, B, and C. This makes it suitable for early-stage fires involving solids, flammable liquids, and gases. Choose the capacity that fits your needs: compact for on-the-go use, or with extra extinguishing power for homes, warehouses, and workshops. Safety advice: Use a fire extinguisher only when the fire is still small and manageable, and ensure you have a clear escape route. If in doubt, leave the area immediately, close doors where possible, and call 112.Which model will you choose? Model Extinguishing Capacity Recommended Application BP-1 – 1 kg 8A 34B C Cars, boats, trailers, RVs, and small workspaces BP-2 – 2 kg 13A 89B C Garage, workshop, mobile use, and small commercial spaces BP-6 – 6 kg 43A 233B C Residential, commercial, warehouse, and larger workshops Advantages of the Alecto dry chemical fire extinguisher Suitable for fire classes A, B, and C Complies with European standard EN 3 Equipped with a pressure gauge and easy to operate Freeze-resistant and operable from approximately -30 to 60 °C Includes a wall-mount bracket; the 6 kg model also comes with a spray hose Minimum specified service life of five years Powder extinguisher or foam extinguisher?A powder extinguisher has high extinguishing power and is versatile, even for gas fires. Keep in mind that extinguishing powder can cause a lot of cleanup work and potential collateral damage to electronics after use. For indoor spaces where residual damage is a major concern, a foam extinguisher may be a better choice.Key Specifications Extinguishing agent: powder Fire classes: A, B, and C Operating pressure: 15 bar Color and material: red metal Mounting: freestanding or with the included wall bracket Package contents: fire extinguisher, mounting hardware, and instructions on the extinguisher Maintenance: Regularly check the pressure gauge, seal, and expiration date. Have fire extinguishers inspected periodically in accordance with the requirements applicable to your home or business, and always replace a fire extinguisher after use.

    In stock, delivery time 1 to 3 working days

    €19,99 - €59,99

  • Alecto Alecto Schuimbrandblusser – 2 of 6 liter Alecto Alecto Schuimbrandblusser – 2 of 6 liter

    Alecto Foam Fire Extinguisher – 2 or 6 liters

    In stock, delivery time 1 to 3 working days

    The Alecto foam fire extinguisher is designed to extinguish incipient fires involving solids and flammable liquids. Foam generally causes significantly less collateral damage than dry chemical powder, making it a practical choice for homes, offices, garages, and workshops. Safety advice: Use a fire extinguisher only for a small, manageable fire, and make sure the exit behind you remains clear. If you are unable to extinguish the fire immediately, leave the room and call 112.Choose the Right Capacity Model Extinguishing capacity Recommended use BS-2 – 2 liters 8A 55B Residential, office, garage, and small workshops BS-6 – 6 liters 21A 183B Commercial building, warehouse, and larger workshop Advantages of a foam extinguisher Suitable for fire classes A and B For solid materials such as wood, paper, and textiles For flammable liquids such as gasoline, oil, and solvents Less residual and collateral damage than with a powder extinguisher Complies with European standard EN 3 Equipped with a pressure gauge and includes a wall bracket The 6-liter model comes with a spray hose What should you keep in mind?These foam extinguishers are not freeze-resistant and have a specified operating temperature range of approximately 5 to 60 °C. Therefore, place them in an easily accessible, frost-free location. For gas fires, an ABC powder extinguisher is more suitable. Always verify that the selected fire extinguisher is appropriate for the risks in the area.Key specifications Extinguishing agent: foam Fire classes: A and B Operating pressure: 15 bar Color and material: red metal Installation: freestanding or wall-mounted Minimum specified service life: five years Package contents: foam extinguisher, mounting hardware, and instructions on the extinguisher Maintenance: Check the pressure gauge, seal, and expiration date regularly. Have the extinguisher serviced in accordance with applicable regulations and replace it after use.

    In stock, delivery time 1 to 3 working days

    €39,99 - €59,99

  • Alecto Alecto SB11 Blusdeken 100 x 100 cm Alecto Alecto SB11 Blusdeken 100 x 100 cm

    Alecto SB11 Fire Blanket 100 x 100 cm

    In stock, delivery time 1 to 3 working days

    The Alecto SB11 fire blanket, measuring 100 x 100 cm, provides you with a compact and ready-to-use tool for small, newly started fires. The blanket is made of fiberglass fabric and comes in a clearly recognizable red storage bag that can be easily mounted on the wall. Important safety advice: This fire blanket is not suitable for oil, grease, or deep-fryer fires. Never use water for these types of fires. If the fire is larger than about a soccer ball or cannot be brought under control immediately, leave the room and call 112.Compact fire blanket for home and on the goThanks to its compact size, the Alecto SB11 is suitable for use in homes, offices, garages, workshops, boats, RVs, and trailers, among other places. Hang the fire blanket in a visible and easily accessible location so you can act quickly in an emergency.Advantages of the Alecto SB11 Fire blanket measuring 100 x 100 cm Suitable for small, incipient fires up to about the size of a soccer ball Can be used to extinguish burning clothing on a person Made of fiberglass fabric Complies with the European standard EN 1869 Compact red storage bag with hanging loop Clear operating instructions on the holder Suitable for single-use Using a fire blanket Pull the fire blanket out of the storage bag using both black loops. Wrap the top edge around your hands and hold the blanket between yourself and the fire for protection. Approach the fire calmly and always keep a safe escape route clear. Carefully and completely cover the source of the fire with the blanket so that oxygen can no longer reach it. Turn off any heat source if it is safe to do so. Leave the blanket in place until the fire has completely cooled down, and replace the blanket after use. Specifications Brand Alecto Model SB11 / SB-11 Fire Blanket Dimensions 100 x 100 cm Material Fiberglass Standard EN 1869 Holder dimensions 155 x 275 x 35 mm Weight Approximately 530 grams Color Red EAN 8712412571581 Package contents Fire blanket, storage bag, and user manual

    In stock, delivery time 1 to 3 working days

    €18,99

  • Alecto Alecto SB28 Blusdeken 120 x 180 cm Alecto Alecto SB28 Blusdeken 120 x 180 cm

    Alecto SB28 Fire Blanket, 120 x 180 cm

    In stock, delivery time 1 to 3 working days

    The Alecto SB28 fire blanket, measuring 120 x 180 cm, provides you with a ready-to-use tool for small, newly started fires. The fire blanket is made of fiberglass fabric, complies with the European standard EN 1869, and comes in a compact wall mount with a hanging loop and clearly marked pull loops. Important safety advice: Do not use a fire blanket on a pan fire or a fire involving oil or grease. In such cases, if it is safe to do so, place a suitable lid over the pan, turn off the heat source, and never use water. If in doubt or if there is danger, call 112 immediately. Immediately accessible when every second counts Thanks to the compact nylon storage bag, you can mount the Alecto SB28 on the wall where it’s visible and within easy reach. The fire blanket is suitable for use in homes, garages, hobby rooms, offices, workshops, warehouses, RVs, and trailers, among other places. Advantages of the Alecto SB28 Generous size of 120 x 180 cm Made of durable fiberglass fabric Complies with the European standard EN 1869 Includes a hanging loop for easy wall mounting Two easily accessible pull loops Compact red-and-white storage bag Suitable for single use Using a fire blanket Pull the fire blanket out of the holder using the loops. Wrap the top edge around your hands to protect them from the heat as much as possible. Calmly and completely cover a small fire, or use the blanket to smother flames on clothing. Always ensure you have a safe escape route and call 112 if the fire is not immediately under control. Always replace the fire blanket after it has been used. Specifications Brand Alecto Model SB28 Fire blanket dimensions 120 x 180 cm Material Fiberglass fabric Standard EN 1869 Packaging dimensions Approx. 35 x 16 x 4 cm Weight Approx. 1.11 kg Color Red, white, and black EAN 8711902090861 Package contents Fire blanket, storage bag, and user manual

    In stock, delivery time 1 to 3 working days

    €24,95

  • Sale -50% Ajax Systems Ajax Systems EN54 Fire ReX Jeweller Wit Ajax Systems Ajax Systems EN54 Fire ReX Jeweller Zwart

    Ajax Systems EN54 Fire ReX Jeweler White

    In stock, delivery time 1 to 3 working days

    Wireless signal booster for a fire alarm system, supports burglary protection devices.EN54 Fire ReX Jeweler increases the range of a wireless network and provides a stable connection for devices of the EN54 Line in large or complex buildings. The signal booster connects wirelessly or via Ethernet to the control and signaling equipment (CIE) and provides reliable communication through steel and concrete.Up to 5 signal boosters can operate within one Ajax system and each booster supports any combination of fire safety, automation and burglary protection devices. Combine devices within the CIE limit to enjoy the benefits of the integrated system, including visual verification of alarms.

    In stock, delivery time 1 to 3 working days

    €259,99 €130,00

  • Sale -50% Ajax Systems Ajax Systems EN54 FireProtect Smoke Zwart

    Ajax Systems EN54 FireProtect (Smoke/Siren) Black

    In stock, delivery time 1 to 3 working days

    The EN54 FireProtect Jeweler detectors combine certified reliability with simple installation. This wireless range includes addressable smoke and heat detectors, some of which are combined with built-in sirens. Each detector offers the best accurate detection in its class thanks to Ajax's patented smoke chamber, dual-spectrum optical sensor and two precision thermistors. Thanks to the built-in communicators, long battery life and stable radio communication, the devices are ready for projects of different sizes. There is no need to open the housing to connect cables, in fact, installation and configuration only takes a few minutes via the Ajax apps. Early maintenance notifications and automated maintenance reports via Ajax PRO Desktop ensure that the system continues to work for years to come. The unique smoke chamber, dual-spectrum optical sensor and proprietary HazeFlow 2 software algorithm guarantee fast and accurate fire notification. The smoking chamber is wired with a dual-spectrum optical sensor, which has blue and infrared LEDs of different wavelengths. It measures the concentration of microparticles in the air to determine the size of volatile particles in the room and only responds to smoke. The HazeFlow 2 algorithm analyzes and compares data from the dual-spectrum optical sensor according to a specified pattern to distinguish smoke from vapor or steam. The detector immediately sounds the alarm if the dynamic patterns indicate a real case of fire.

    In stock, delivery time 1 to 3 working days

    €100,99 €50,49

  • Sale -50% Ajax Systems Ajax Systems EN54 FireProtect (Hitte) Wit

    Ajax Systems EN54 FireProtect (Heat) White

    In stock, delivery time 1 to 3 working days

    The EN54 FireProtect Jeweler detectors combine certified reliability with simple installation. This wireless range includes addressable smoke and heat detectors, some of which are combined with built-in sirens. Each detector offers the best accurate detection in its class thanks to Ajax's patented smoke chamber, dual-spectrum optical sensor and two precision thermistors. Thanks to the built-in communicators, long battery life and stable radio communication, the devices are ready for projects of different sizes. There is no need to open the housing to connect cables, in fact, installation and configuration only takes a few minutes via the Ajax apps. Early maintenance notifications and automated maintenance reports via Ajax PRO Desktop ensure that the system continues to work for years to come. Two built-in thermistors detect a rapid temperature rise or when the temperature exceeds the threshold value. These thermistors sound an alarm when a rapid temperature rise or static temperature is detected. The heat detector mode can be selected in the app: A1R/A1S/BR/BS/CS or fixed temperature. This approach guarantees that flames and heat development from smoldering material are quickly detected and reported. The detectors are controlled by pre-installed batteries on which the device can operate for 5 years. They report in advance that the batteries are almost empty. Installers and users receive notifications from their Ajax apps. The EN54 FireProtect Jeweler detectors also indicate that the battery is almost empty via an LED indication and an audio signal. Thanks to the battery doors, replacing the battery is quick and easy, without the need for additional tools.

    In stock, delivery time 1 to 3 working days

    €88,99 €44,49

  • Sale -50% Ajax Systems Ajax Systems EN54 FireProtect (Hitte) Wit

    Ajax Systems EN54 FireProtect (Heat/Siren) White

    In stock, delivery time 1 to 3 working days

    The EN54 FireProtect Jeweler detectors combine certified reliability with simple installation. This wireless range includes addressable smoke and heat detectors, some of which are combined with built-in sirens. Each detector offers the best accurate detection in its class thanks to Ajax's patented smoke chamber, dual-spectrum optical sensor and two precision thermistors. Thanks to the built-in communicators, long battery life and stable radio communication, the devices are ready for projects of different sizes. There is no need to open the housing to connect cables, in fact, installation and configuration only takes a few minutes via the Ajax apps. Early maintenance notifications and automated maintenance reports via Ajax PRO Desktop ensure that the system continues to work for years to come. Two built-in thermistors detect a rapid temperature rise or when the temperature exceeds the threshold value. These thermistors sound an alarm when a rapid temperature rise or static temperature is detected. The heat detector mode can be selected in the app: A1R/A1S/BR/BS/CS or fixed temperature. This approach guarantees that flames and heat development from smoldering material are quickly detected and reported. The detectors are controlled by pre-installed batteries on which the device can operate for 5 years. They report in advance that the batteries are almost empty. Installers and users receive notifications from their Ajax apps. The EN54 FireProtect Jeweler detectors also indicate that the battery is almost empty via an LED indication and an audio signal. Thanks to the battery doors, replacing the battery is quick and easy, without the need for additional tools.

    In stock, delivery time 1 to 3 working days

    €100,99 €50,49

  • Sale -50% Ajax Systems Ajax Systems EN54 FireProtect Smoke Zwart

    Ajax Systems EN54 FireProtect (Heat) Black

    In stock, delivery time 1 to 3 working days

    The EN54 FireProtect Jeweler detectors combine certified reliability with simple installation. This wireless range includes addressable smoke and heat detectors, some of which are combined with built-in sirens. Each detector offers the best accurate detection in its class thanks to Ajax's patented smoke chamber, dual-spectrum optical sensor and two precision thermistors. Thanks to the built-in communicators, long battery life and stable radio communication, the devices are ready for projects of different sizes. There is no need to open the housing to connect cables, in fact, installation and configuration only takes a few minutes via the Ajax apps. Early maintenance notifications and automated maintenance reports via Ajax PRO Desktop ensure that the system continues to work for years to come. Two built-in thermistors detect a rapid temperature rise or when the temperature exceeds the threshold value. These thermistors sound an alarm when a rapid temperature rise or static temperature is detected. The heat detector mode can be selected in the app: A1R/A1S/BR/BS/CS or fixed temperature. This approach guarantees that flames and heat development from smoldering material are quickly detected and reported. The detectors are controlled by pre-installed batteries on which the device can operate for 5 years. They report in advance that the batteries are almost empty. Installers and users receive notifications from their Ajax apps. The EN54 FireProtect Jeweler detectors also indicate that the battery is almost empty via an LED indication and an audio signal. Thanks to the battery doors, replacing the battery is quick and easy, without the need for additional tools.

    In stock, delivery time 1 to 3 working days

    €88,99 €44,49

  • Sale -50% Ajax Systems Ajax Systems EN54 Fire Hub Zwart Ajax Systems Ajax Systems EN54 Fire Hub Zwart

    Ajax Systems EN54 Fire Hub Black

    In stock, delivery time 1 to 3 working days

    Meet EN54 Fire Hub Jeweller, the CIE touchscreen from Ajax, designed for managing a fire alarm system. It is easy to install, simple to use and does not require much maintenance. The built-in communicators and a fully wireless connection make it possible to quickly install the system and connect it to a control room via the Ajax apps. With its large touchscreen and intuitive interface, the CIE provides detailed information about the system and alarms, so staff are immediately aware of any situation. The CIE also supports EN 50131 (Grade 2) intrusion protection, video surveillance and automation devices, making it a unified solution for commercial construction. Each alarm can be accompanied by visual verification, allowing personnel to respond effectively to an emergency. All built-in communicators EN54 Fire Hub Jeweler is fully equipped with all necessary EN 54-25 certified communicators. So you do not need to install additional modules. It provides a seamless connection between the CIE and fire detectors, sirens, strobe lights (VADs), I/O modules, manual call points and other system devices. When a manual call point is pressed, the alarm is spread to the siren and strobe lights (VADs) in just 3 seconds. At the same time, the fire alarm is sent to the control room via WiFi, Ethernet or 4G (LTE). Built for fire safety. Suitable for more. EN54 Fire Hub Jeweler is not just a CIE for a fire alarm: it is a flexible solution for building comprehensive security. It can operate as a standalone fire alarm or as part of an integrated system that combines fire safety, burglary protection, automation and video surveillance. Fast and secure authentication There are two simple ways to authenticate users: via personal codes and via contactless access devices such as an Ajax Pass or Tag. Each time an access device is used it is logged and displayed in the app and on the CIE screen. Owners can directly assign, revoke or adjust rights remotely for the fire brigade or other users in Ajax apps. Fire alarm system Fully compliant with EN 54 Reliable detection of smoke and rapid temperature rise Audible and visual indication that meets strict legal requirements Automated control of fire equipment and evacuation in case of fire alarms System management via the large CIE touchscreen or the Ajax apps Fire alarm combined with burglary protection Complies with standards EN 54 and EN 50131 (Grade 2) Fire alarm, burglary protection, video surveillance, and automation integrated into one system Supports visual alarm verification for faster threat identification and response Improved system capabilities through automation Full control over all devices via Ajax mobile and desktop apps

    In stock, delivery time 1 to 3 working days

    €778,99 €389,50

  • Sale -50% Ajax Systems Ajax Systems EN54 Fire ReX Jeweller Zwart Ajax Systems Ajax Systems EN54 Fire ReX Jeweller Zwart

    Ajax Systems EN54 Fire ReX Jeweler Black

    In stock, delivery time 1 to 3 working days

    Wireless signal booster for a fire alarm system, supports burglary protection devices.EN54 Fire ReX Jeweler increases the range of a wireless network and provides a stable connection for devices of the EN54 Line in large or complex buildings. The signal booster connects wirelessly or via Ethernet to the control and signaling equipment (CIE) and provides reliable communication through steel and concrete.Up to 5 signal boosters can operate within one Ajax system and each booster supports any combination of fire safety, automation and burglary protection devices. Combine devices within the CIE limit to enjoy the benefits of the integrated system, including visual verification of alarms.

    In stock, delivery time 1 to 3 working days

    €259,99 €130,00

  • Sale -50% Ajax Systems Ajax Systems EN54 Fire Hub Wit Ajax Systems Ajax Systems EN54 Fire Hub Zwart

    Ajax Systems EN54 Fire Hub White

    In stock, delivery time 1 to 3 working days

    Meet EN54 Fire Hub Jeweller, the CIE touchscreen from Ajax, designed for managing a fire alarm system. It is easy to install, simple to use and does not require much maintenance. The built-in communicators and a fully wireless connection make it possible to quickly install the system and connect it to a control room via the Ajax apps. With its large touchscreen and intuitive interface, the CIE provides detailed information about the system and alarms, so staff are immediately aware of any situation. The CIE also supports EN 50131 (Grade 2) intrusion protection, video surveillance and automation devices, making it a unified solution for commercial construction. Each alarm can be accompanied by visual verification, allowing personnel to respond effectively to an emergency. All built-in communicators EN54 Fire Hub Jeweler is fully equipped with all necessary EN 54-25 certified communicators. So you do not need to install additional modules. It provides a seamless connection between the CIE and fire detectors, sirens, strobe lights (VADs), I/O modules, manual call points and other system devices. When a manual call point is pressed, the alarm is spread to the siren and strobe lights (VADs) in just 3 seconds. At the same time, the fire alarm is sent to the control room via WiFi, Ethernet or 4G (LTE). Built for fire safety. Suitable for more. EN54 Fire Hub Jeweler is not just a CIE for a fire alarm: it is a flexible solution for building comprehensive security. It can operate as a standalone fire alarm or as part of an integrated system that combines fire safety, burglary protection, automation and video surveillance. Fast and secure authentication There are two simple ways to authenticate users: via personal codes and via contactless access devices such as an Ajax Pass or Tag. Each time an access device is used it is logged and displayed in the app and on the CIE screen. Owners can directly assign, revoke or adjust rights remotely for the fire brigade or other users in Ajax apps. Fire alarm system Fully compliant with EN 54 Reliable detection of smoke and rapid temperature rise Audible and visual indication that meets strict legal requirements Automated control of fire equipment and evacuation in case of fire alarms System management via the large CIE touchscreen or the Ajax apps Fire alarm combined with burglary protection Complies with standards EN 54 and EN 50131 (Grade 2) Fire alarm, burglary protection, video surveillance, and automation integrated into one system Supports visual alarm verification for faster threat identification and response Improved system capabilities through automation Full control over all devices via Ajax mobile and desktop apps

    In stock, delivery time 1 to 3 working days

    €778,99 €389,50

  • Sale -50% Ajax Systems Ajax Systems EN54 FireProtect (Hitte) Wit

    Ajax Systems EN54 FireProtect (Smoke/Siren) White

    In stock, delivery time 1 to 3 working days

    The EN54 FireProtect Jeweler detectors combine certified reliability with simple installation. This wireless range includes addressable smoke and heat detectors, some of which are combined with built-in sirens. Each detector offers the best accurate detection in its class thanks to Ajax's patented smoke chamber, dual-spectrum optical sensor and two precision thermistors. Thanks to the built-in communicators, long battery life and stable radio communication, the devices are ready for projects of different sizes. There is no need to open the housing to connect cables, in fact, installation and configuration only takes a few minutes via the Ajax apps. Early maintenance notifications and automated maintenance reports via Ajax PRO Desktop ensure that the system continues to work for years to come. The unique smoke chamber, dual-spectrum optical sensor and proprietary HazeFlow 2 software algorithm guarantee fast and accurate fire notification. The smoking chamber is wired with a dual spectrum optical sensor, which has blue and infrared LEDs of different wavelengths. It measures the concentration of microparticles in the air to determine the size of volatile particles in the room and only responds to smoke. The HazeFlow 2 algorithm analyzes and compares data from the dual-spectrum optical sensor according to a specified pattern to distinguish smoke from vapor or steam. The detector immediately sounds the alarm if the dynamic patterns indicate a real case of fire.

    In stock, delivery time 1 to 3 working days

    €100,99 €50,49

  • Sale -40% Ajax Systems Ajax Systems EN54 Sounder/Strobe, black Ajax Systems Ajax Systems EN54 Sounder/Strobe, black

    Ajax Systems EN54 Sounder/Strobe, black

    In stock, delivery time 1 to 3 working days

    The Ajax EN54 FireProtect Sounder/VAD Jeweller is a wireless addressable fire alarm with a visual alarm indicator. The combination of audible and visual signaling is designed for professional Ajax EN54 fire alarm systems. Available only with professional installationThis product is sold exclusively as part of a professional installation project. It is not intended for self-installation. The sales price is not displayed online, and the product cannot be ordered directly. Request a quote for consultation, project planning, delivery, and installation.

    In stock, delivery time 1 to 3 working days

    €369,00 €220,99

  • Sale -40% Ajax Systems Ajax Systems EN54 FireProtect Smoke Black

    Ajax Systems EN54 FireProtect Smoke Black

    In stock, delivery time 1 to 3 working days

    The Ajax EN54 FireProtect Smoke Jeweller is a wireless addressable smoke detector for professional EN54 fire alarm systems. The detector uses optical smoke detection and operates as part of the Ajax EN54 system. Professional installation requiredThis product is available exclusively as part of a professional installation project and is not intended for self-installation. The price is not displayed online, and it is not possible to order directly through the web store. Request a quote for consultation, design, delivery, and installation.

    In stock, delivery time 1 to 3 working days

    €121,00 €72,99

  • X-Sense X-Sense XC01-M Slimme koolmonoxidemelder voor SBS50

    X-Sense XC01-M Smart Carbon Monoxide Detector for SBS50

    In stock, delivery time 1 to 3 working days

    X-Sense XC01-M Smart CO DetectorThe X-Sense XC01-M is a carbon monoxide detector that communicates with the X-Sense app via the SBS50 base station. This allows you to receive notifications on your smartphone when using compatible configurations and to integrate the detector into a network of up to 50 devices. Electrochemical CO detection Works with the SBS50 hub App notifications via the hub Up to 50 devices in a single network Replaceable battery, up to 5 years 85 dB alarm at 3 meters EN 50291 certified Specifications Model XC01-M Detection Carbon Monoxide Hub SBS50 Network Up to 50 devices Battery Replaceable, up to 5 years Certification EN 50291

    In stock, delivery time 1 to 3 working days

    €44,66

  • X-Sense X-Sense SC07 Rook- en koolmonoxidemelder met LCD - 10 jaar batterij

    X-Sense SC07 Smoke and Carbon Monoxide Detector with LCD - 10-Year Battery

    In stock, delivery time 1 to 3 working days

    X-Sense SC07 Combined Smoke and CO DetectorThe X-Sense SC07 combines photoelectric smoke detection with electrochemical carbon monoxide detection in a single housing. The LCD screen displays clear information, and the built-in battery has a lifespan of up to 10 years. Smoke and carbon monoxide detection in a single detector LCD screen Integrated battery with a lifespan of up to 10 years 85 dB alarm at 3 meters Indicator light and test button EN 14604 and EN 50291 certified Specifications Model SC07 Detection Smoke + carbon monoxide Display LCD Battery Built-in, up to 10 years Alarm Volume 85 dB at 3 m Certification EN 14604 / EN 50291

    In stock, delivery time 1 to 3 working days

    €54,16

  • X-Sense X-Sense XS01 3-pack Mini rookmelders - 10 jaar batterij

    X-Sense XS01 3-Pack Mini Smoke Detectors - 10-Year Battery Life

    In stock, delivery time 1 to 3 working days

    X-Sense XS01 3-Pack Smoke DetectorsSet of three compact X-Sense XS01 smoke detectors with built-in 10-year battery. Ideal for providing independent smoke detection for multiple rooms or floors at once. 3x XS01 mini smoke alarms Built-in battery lasting up to 10 years 85 dB alarm at 3 meters Indicator light and test button No hub required EN 14604 certified Specifications Model XS01-3PACK Quantity 3 smoke detectors Battery Built-in, up to 10 years Certification EN 14604

    In stock, delivery time 1 to 3 working days

    €41,80

  • X-Sense X-Sense XC01-WR Koppelbare koolmonoxidemelder met LCD

    X-Sense XC01-WR Linkable Carbon Monoxide Detector with LCD

    In stock, delivery time 1 to 3 working days

    X-Sense XC01-WR Wireless Networkable CO DetectorThe XC01-WR is a standalone carbon monoxide detector with an LCD screen and RF networking at 868 MHz. Up to 24 compatible detectors can be networked together, ensuring that an alarm can be heard throughout the home. Electrochemical CO detection RF 868 MHz Up to 24 linked detectors LCD screen Replaceable battery, up to 5 years Alarm volume 85 dB at 3 meters EN 50291 certified Specifications Model XC01-WR Detection CO Communication RF 868 MHz Max. paired 24 Battery Replaceable, up to 5 years Display LCD Certification EN 50291

    In stock, delivery time 1 to 3 working days

    €34,20

  • X-Sense X-Sense CO03D-W Koppelbare koolmonoxidemelder met LCD

    X-Sense CO03D-W Networkable Carbon Monoxide Detector with LCD

    In stock, delivery time 1 to 3 working days

    X-Sense CO03D-W Wireless-Enabled CO DetectorThe X-Sense CO03D-W monitors for carbon monoxide and can be paired with up to 24 compatible detectors via 868 MHz RF. The LCD screen displays clear information, while the audible alarm provides a loud warning in case of danger. CO Detection 868 MHz RF networking Up to 24 linked detectors LCD screen Replaceable battery 85 dB alarm at 3 meters EN 50291 certified Specifications Model CO03D-W Detection Carbon Monoxide Communication RF 868 MHz Max. paired 24 Display LCD Certification EN 50291

    In stock, delivery time 1 to 3 working days

    €22,62

  • X-Sense X-Sense XS01-WX 3-pack WiFi rookmelders met app

    X-Sense XS01-WX 3-pack Wi-Fi smoke detectors with app

    In stock, delivery time 1 to 3 working days

    X-Sense XS01-WX 3-Pack Smart Smoke DetectorsThis set includes three compact XS01-WX smoke detectors with a direct 2.4 GHz Wi-Fi connection. The detectors can send alerts via the X-Sense app without requiring a separate base station. 3x XS01-WX smoke detectors Direct 2.4 GHz Wi-Fi connection App notifications without a hub Replaceable battery, approximately 1 year 85 dB alarm at 3 meters EN 14604 certified Specifications Model XS01-WX-3PACK Quantity 3 smoke detectors Communication 2.4 GHz Wi-Fi App X-Sense Home Security Certification EN 14604

    In stock, delivery time 1 to 3 working days

    €69,36

  • X-Sense X-Sense FS31 Branddetectieset - 3 rookmelders + SBS50 hub

    X-Sense FS31 Fire Detection Kit - 3 Smoke Detectors + SBS50 Hub

    In stock, delivery time 1 to 3 working days

    X-Sense FS31 Smart Fire Detection KitThe X-Sense FS31 is a complete starter kit that includes three XS01-M smoke detectors and one SBS50 base station. The hub connects compatible detectors to the X-Sense app for alerts and centralized management. 3x XS01-M smoke detectors 1x SBS50 base station App notifications via hub Up to 50 devices per network 85 dB alarm at 3 meters EN 14604-certified smoke detectors Specifications Model FS31 Contents 3 smoke detectors + SBS50 Wi-Fi hub 2.4 GHz Network size Up to 50 devices

    In stock, delivery time 1 to 3 working days

    €85,50


You have 24 of the 38 products seen

Fire Prevention for Homes and Businesses

Effective fire prevention starts with reliable detection and the right fire-suppression equipment. At Alarma Total, you’ll find fire safety solutions for homes, offices, stores, and other commercial spaces—from smoke detectors and carbon monoxide detectors to fire extinguishers and professional fire alarm systems.

Choose a solution that fits your situation. For homes, reliable smoke detectors and CO detectors are essential. For business applications, we also offer professional solutions for fire detection, alarm systems, and fire suppression.

Everything you need for a fire-safe environment

Browse our selection of smoke detectors, 230V smoke detectors, linkable smoke detectors, heat detectors, carbon monoxide detectors, fire extinguishers, and professional fire alarm systems. Need help putting together a solution? Our specialists are happy to advise you.

Login

Forgot your password?

Don't have an account yet?
Create a free account and enjoy many benefits.