All products except AJAX
-
Jablotron JA-155E Wireless keyboard with display and RFID reader WHITE
JA-155E Wireless keyboard with display and RFID reader WHITE The keypad is a wireless part of the JABLOTRON system. It serves to control and display the system status Indication. It is equipped with four segments whose description is displayed on the LCD screen. The device must be installed by a trained technician with a valid certificate issued by an authorized distributor. The keypad is compatible with the following control panels JA-103K and JA-107K. Specifications: Power supply 4 x alkaline batteries, type: AA (LR6) 1.5 VPlease note: Batteries are not included. Typical lifetime of batteries 1–2 Years LowBatt state Quiescent current consumption (6 V) 245 μA Maximum current consumption (6 V) 115mA External power supply 12 V +/-1 V type. 45 mA, max. 100 mA Communication band 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) Communication range approx 200 m (open area) RFID frequency 125kHz Dimensions 110 x 136 x 33mm Weight (w/o batteries) 285g Classification Security grade 2/Environmental class II (according to EN 50131-1) Environment indoor general Operating temperature range -10 °C to +40 °C Average operating humidity 75% RH, w/o condensation Certification body Trezor Test s.r.o. (no. 3025) In compliance with ETSI EN 300 220-1,-2, ETSI EN 300 3300, EN 50130-4, EN 55032, EN 62368-1, EN 50581, EN 50131-1, EN 50131-3, EN 50131-5-3, EN 50131-6, Operating conditions according to general authorization ERC REC 70-03 Recommended screw 4 x ø 3.5 x 40 mm (countersunk head)
€295,00
-
Jablotron JA-155E-AN, Wireless keypad with four-segment keypad, LCD and RFID reader
JA-155E-AN, Wireless keypad with four-segment keypad, LCD and RFID reader The keyboard is a wireless part of the JABLOTRON system. It is used to control and display the system status indication. It is equipped with four segments; their descriptions are displayed on the LCD screen. The device must be installed by a trained technician with a valid certificate issued by an authorized distributor. The keyboard is compatible with the following control panels JA-102K, JA-103K, JA-107K and JA-152KR.Specifications: Power source 4 x alkaline batteries, type: AA (LR6) 1.5 V Warning batteries are not included. Typical battery life 1-2 years LowBatt condition Rated current draw (6 V) 245 μA Maximum power consumption (6 V) 115 mA External power source 12 V +/-1 V typ. 45 mA, max. 100 mA Maximum cable length 3 m Communication band 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) Communication range approx. 200 m (open area) RFID frequency 125 kHz Maximum RFID magnetic field strength -5.4 dBμA/m (measured at 10 m) Dimensions 110 x 136 x 33mm Weight (without batteries) 285g Classification Security class 2/Environmental class II (according to EN 50131-1) General environment General Operating temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification body Trezor Test s.r.o. (no. 3025) In accordance with ETSI EN 300 220-1,-2, ETSI EN 300 3300, EN 50130-4, EN 55032, EN 62368-1, EN 50581, EN 50131-1, EN 50131-3, EN 50131-5-3, EN 50131-6 Conditions of use according to general authorization ERC REC 70-03
€294,62
-
Jablotron JA-155P, motion detector PIR Ceiling
JA-155P, motion detector PIR Ceiling This detector is designed to detect human body movements in buildingsThe product is installed on the ceiling and its guaranteed detection range is 360° with a recording radius of up to 5.5 m at a mounting height of 3.5 mFalse alarm resistance can be set to two levelsThe detector has a pulse response and occupies one position in the system Attention!! Only works on the JA-103 and JA-107 control panelsSpecifications: Power 2x lithium batteries, type CR123A (3 V/1500 mAh)Warning: batteries are not included. Number of batteries 1x CR123A 2x CR123A Lifetime (Smartwatch mode) 2 years 4 years Low battery voltage Communication band 868.1 MHz, JABLOTRON protocol RF range up to 300 m (open area) Recommended installation height 2.5 – 3.5 m above the ground level Detection coverage 360°/11 m (installation height – 3.5 m) Dimensions Ø 125 x 40 mm Weight (without batteries) 124g Classification security grade 2/II. Indoor general (according to EN 50131-1) Operational environment indoor general Operational temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification body Trezor Test s.r.o. (no. 3025) Complies with EN 50131-1 ed. 2+A1+A2, EN 50131-2-2, EN 50131-5-3+A1, ETSI EN 300 220-1,-2, EN 50130-4 ed. 2+A1, EN 55032, EN 62368-1, EN 50581 Can be operated according to ERC REC 70-03
€173,33
-
Jablotron JA-155E-GR, Wireless keypad with four-segment keypad, LCD and RFID reader
JA-155E-GR, Wireless keypad with four-segment keypad, LCD and RFID reader The keyboard is a wireless part of the JABLOTRON system. It is used to control and display the system status indication. It is equipped with four segments; their descriptions are displayed on the LCD screen. The device must be installed by a trained technician with a valid certificate issued by an authorized distributor. The keyboard is compatible with the following control panels JA-102K, JA-103K, JA-107K and JA-152KR.Specifications: Power source 4 x alkaline batteries, type: AA (LR6) 1.5 V Warning batteries are not included. Typical battery life 1-2 years LowBatt condition Rated current draw (6 V) 245 μA Maximum power consumption (6 V) 115 mA External power source 12 V +/-1 V typ. 45 mA, max. 100 mA Maximum cable length 3 m Communication band 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) Communication range approx. 200 m (open area) RFID frequency 125 kHz Maximum RFID magnetic field strength -5.4 dBμA/m (measured at 10 m) Dimensions 110 x 136 x 33mm Weight (without batteries) 285g Classification Security class 2/Environmental class II (according to EN 50131-1) General environment General Operating temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification body Trezor Test s.r.o. (no. 3025) In accordance with ETSI EN 300 220-1,-2, ETSI EN 300 3300, EN 50130-4, EN 55032, EN 62368-1, EN 50581, EN 50131-1, EN 50131-3, EN 50131-5-3, EN 50131-6 Conditions of use according to general authorization ERC REC 70-03
€294,62
-
Jablotron JA-154E-GR, Wireless keypad, LCD and RFID Gray
JA-154E-GR, Wireless keypad, LCD and RFID GrayThe JA-154E is a two-way wireless access module with an LCD screen, a keypad and an RFID reader for controlling the security system. Contains one control segment and can be equipped with up to 20 JA-192E control segments if required. The keyboard is compatible with the following keypads JA-102K, JA-103K and JA-107K. Incl. LCD screen/keys/card reader Tiltable lid at the front Works via code and/or RFID (125KHz) Communication wirelessly via 868.1 MHz Power supply via 4x AA 1.5V battery (excl.) For indoor use only Dimensions: 102 x 145 x 33mm/350gr Specifications: Current 4 x alkaline batteries AA (LR6) 1.5 VPlease note: batteries are not included Typical lifespan 1 - 2 years according to the settings Power supply from external power supply 0.5 watts Communication tape 868.1 MHz, JABLOTRON protocol Communication range 200 m (open ground) RFID frequency 125kHz Dimensions 102x145x33mm Weight 350 grams Classification Grade II According to EN 50131-1, EN 50131-3, EN 50131-5-3 Operational environment EN 50131-1 II. General indoors Operating temperature range -10 to +40 °C Also complies ETSI EN 300 330, ETSI EN 300 220, EN 50130-4, EN 55022, EN 60950-1 Can be operated according to ERC REC 70-03
€308,55
-
Jablotron JA-162PC, Wireless motion detector with photo camera
JA-162PC, Wireless motion detector with photo camera This device is a wireless part of the JABLOTRON system. It serves for the detection of human movements in the interior of buildings and visual alarm confirmation. The camera takes color photos with a resolution of up to 640x480 pixels. The camera is equipped with a visible flash to take photos in the dark. The images are stored in the internal memory of the detector and are then transferred to the control panel and from the control panel they can be sent to MyJABLOTRON or ARC. The detector can also take a photo on request. The detector occupies one position in the system and must be installed by a trained technician with a valid certificate issued by an authorized distributor. The photo verification can only be used after registering the system with MyJABLOTRON or with a subsequent ARC service. This device is compatible with control panels JA-103K, JA-107K, JA-102K and higher models. Specifications: Current 2x lithium battery type CR123A 3 V/1.5 Ah Typical battery life about 2 years (1 activation and 1 series of photos per day)Please note: batteries are not included LowBatt voltage ≤2.8V Quiescent current consumption 90 µA Maximum power consumption 700mA Communication frequency 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) 11mW Communication range approx. 300 m (unrestricted area) Recommended installation height 2.5 m above the floor PIR detection angle/detection coverage 90°/12 meters Horizontal camera shooting angle 90° Range of the flash maximum 3 meters Camera resolution LQ 320x240; HQ 640 x 480 pixels Photo format LQ/HQ 5–20 KB/5–64 KB Typical (LQ) photo transmission time to the control panel up to 20 s (10 s) Typical (HQ) photo transmission time to the control panel up to 130 s (60 s) Typical time for transferring photos to the server 15 seconds/GPRS; 2 seconds/LAN Dimensions, weight (without batteries) 150 x 65 x 44 mm, 130 grams Operational temperature range -10 °C to +40 °C Operational environment In general Average operational humidity 75% RH, without condensation Classification Safety class 2/Environmental class II (EN 50131-1) Certification Body Trezor Test No. 3025 Matches EN 50131-1, EN 50131-2-2, EN 50131-5-3, EN 50131-6, EN 55032, ETSI EN 300 220-1,-2, EN 62368-1, EN IEC 63000 Can be operated according to ERC/REC-70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)
€365,48
-
Jablotron JA-152SHM, Shock and tilt detector wireless
JA-152SHM, Shock and tilt detector wireless Attention!! Only suitable for the JA-103 & JA-107 control panels Combined shock or tilt detector with magnetic contact. Responds to vibrations and shocks in shock detection mode. In tilt detection mode, responds to changes in its position.Specifications: Power supply 1x alkaline battery type AA(LR6, 1.5 V / 2.4 Ah) Battery life approx. 2 years Maximum power consumption 80mA Compatibility with control panels JA-103K, JA-107K Communication frequency 868.1 MHz, JABLOTRON protocol Maximum Radio Frequency Output (ERP) 18.2mW Communication range approx. 300 m Environment within general Operational temperature range -10 °C to +40 °C Detector dimensions 24x109x24mm Magnet dimensions 16x55x15mm Weight (without battery) 35 grams
€129,68
-
Jablotron JA-153E-GR Wireless code control panel RFID Button Gray
JA-153E-GR Wireless code control panel RFID Button GrayThe JA-153E is a two-way wireless keypad module with RFID reader to control a security system. Contains one control segment and can be equipped with up to 20 JA-192E control segments if required. The unit allows simple system control using interlocking segments. It features Smart Radio Wake-up (SRW) that responds, for example, to the activation of a wireless door detector and automatically ends sleep mode in a set system during the entry delay. The module works on alkaline batteries. The module is addressable and occupies one alarm system position.
€251,30
-
Jablotron JA-162PB-WH, PIR motion detector with wireless glass break sensor
JA-162PB-WH, PIR motion detector with wireless glass break sensor This device is part of the JABLOTRON system. It is used for the detection of movement in the interior of buildings and for the detection of breaking windows. This detector combines two sensors (PIR motion and BMS acoustics) in one housing. The detector occupies two positions in the system. Specifications: Nutrition 2x Lithium battery CR123A (3.0 V/1.5 Ah) Warning batteries are not included. Battery life approx. 3 years Low battery voltage Nominal current draw 50 uA Maximum current draw 50 mA Communication tape 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) RF range 500 m (open area) Recommended installation height 2.5 m above the floor PIR detection angle/range 90°/12 m BMS detection angle/range 90°/9 m Dimensions 150 x 63 x 40mm Weight (without batteries) 135 g Classification Security class 2/Environmental class II (according to EN 50131-1) General environment General Operating temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification body Trezor Test s.r.o. (no. 3025) In accordance with ETSI EN 300 220-1.2, EN 50130-4, EN 55032, EN IEC 62368-1, EN IEC 63000, EN 50131-1, EN 50131-2-2, EN 50131-2-7-1, EN 50131-5-3, EN 50131-6 Can be operated according to ERC REC 70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)
€204,36
-
Jablotron JA-152P-GR, Wireless motion detector PIR Gray
JA-152P-GR, Wireless motion detector PIR Gray NOTE: Only works on the Midway Pro and Essex Pro and Mercury The product is a wireless system device for the JABLOTRON 100+. It is designed to detect human body movements in buildings. The guaranteed detection coverage is 90°/12 m. The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors. Specifications: Compatible with F-Link 2.0.0 and higher Current 1 Lithium battery type CR123A (3 V/1500 mAh)Please note: Battery not included Typical battery life 4 years (longest in smartwatch mode, at 20°C) Low battery voltage Power consumption in standby mode 30 μA Maximum power consumption 100mA Communication tape 868.1 MHz, JABLOTRON protocol Communication range approx. 300 m (open area) Recommended installation height 2.2 – 2.5 m above the floor Detection angle/detection coverage 90°/12 meters Dimensions 62x110x40mm Weight (without battery) 90 grams Classification Safety class 2/Environmental class II (according to EN 50131-1) Operational environment In general Operational temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification Body Trezor Test sro (no. 3025) Matches EN 50131-1 edition. 2+A1+A2, EN 50131-2-2, EN 50131-5-3+A1, EN 50131-6 edition. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 edition. 2+A1, EN 55032, EN 62368-1, EN 50581 Can be operated according to ERC REC 70-30
€168,19
-
Jablotron JA-162PB-AN, Motion detector PIR with glass break sensor wireless Anthracite
JA-162PB-AN, Motion detector PIR with glass break sensor wireless anthracite This device is part of the JABLOTRON system. It is used for the detection of movement in the interior of buildings and for the detection of breaking windows. This detector combines two sensors (PIR motion and BMS acoustics) in one housing. The detector occupies two positions in the system. Specifications: Nutrition 2x Lithium battery CR123A (3.0 V/1.5 Ah) Warning batteries are not included. Battery life approx. 3 years Low battery voltage Nominal current draw 50 uA Maximum current draw 50 mA Communication tape 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) RF range 500 m (open area) Recommended installation height 2.5 m above the floor PIR detection angle/range 90°/12 m BMS detection angle/range 90°/9 m Dimensions 150 x 63 x 40mm Weight (without batteries) 135 g Classification Security class 2/Environmental class II (according to EN 50131-1) General environment General Operating temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification body Trezor Test s.r.o. (no. 3025) In accordance with ETSI EN 300 220-1.2, EN 50130-4, EN 55032, EN IEC 62368-1, EN IEC 63000, EN 50131-1, EN 50131-2-2, EN 50131-2-7-1, EN 50131-5-3, EN 50131-6 Can be operated according to ERC REC 70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)
€204,36
-
Jablotron JA-162PW-AN, Wireless Designline Dual MW PIR anthracite
JA-162PW-AN, Wireless Designline Dual MW PIR anthraciteThis product is a wireless device of the JABLOTRON 100+ system. This detector is designed to detect human body movements in buildings. High immunity against false alarms is achieved thanks to the combination of PIR and microwave (MW) detection. The detector works like a classic PIR detector, but if the PIR detects movement in a monitored area, the MW part activates and confirms the previous PIR activation. Specifications:Power source 2 lithium batteries, type CR123A (3 V/1500 mAh); batteries are not included Typical battery life 4 years Low battery charge Quiescent current consumption 65 μA Maximum power consumption 50mA Communication tape 868.1 MHz, JABLOTRON protocol Maximum MW radio frequency power (Effective Radiated Power – ERP) 25mW Communication range approx. 300 m (open space) Recommended installation height 2.2 – 2.5 m above floor level Detection angle/PIR coverage 90°/12 m Detection angle/MW coverage 80°/12 m MW frequency 24.125 GHz Maximum MW radio frequency power (Effective Radiated Power – ERP) 30 mW Sizes 150 x 63 x 40mm Weight (without batteries) 125 g Classification Safety grade 2/Environmental class II (according to EN 50131-1) Operational temperature range -10 °C to +40 °C Average operational humidity 75% relative humidity, no condensation Certification body Trezor Test s.r.o. (no. 3025) In accordance with ETSI EN 300 440, EN 50130-4, EN 55032, EN 62368-1, EN 50581, EN 50131-1, EN 50131-2-4 Operating conditions according to general authorization ERC REC 70-03
€199,35
-
Jablotron JA-152P-AN, Wireless motion detector PIR Anthracite
JA-152P-AN, Wireless motion detector PIR Anthracite NOTE: Only works on the Midway Pro and Essex Pro and Mercury The product is a wireless system device for the JABLOTRON 100+. It is designed to detect human body movements in buildings. The guaranteed detection coverage is 90°/12 m. The detector meets the highest quality and design requirements, making it suitable even for luxurious interiors. Specifications: Compatible with F-Link 2.0.0 and higher Current 1 Lithium battery type CR123A (3 V/1500 mAh)Please note: Battery not included Typical battery life 4 years (longest in smartwatch mode, at 20°C) Low battery voltage Power consumption in standby mode 30 μA Maximum power consumption 100mA Communication tape 868.1 MHz, JABLOTRON protocol Communication range approx. 300 m (open area) Recommended installation height 2.2 – 2.5 m above the floor Detection angle/detection coverage 90°/12 meters Dimensions 62x110x40mm Weight (without battery) 90 grams Classification Safety class 2/Environmental class II (according to EN 50131-1) Operational environment In general Operational temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification Body Trezor Test sro (no. 3025) Matches EN 50131-1 edition. 2+A1+A2, EN 50131-2-2, EN 50131-5-3+A1, EN 50131-6 edition. 2+A1, ETSI EN 300 220-1,-2, EN 50130-4 edition. 2+A1, EN 55032, EN 62368-1, EN 50581 Can be operated according to ERC REC 70-30
€168,19
-
Jablotron JA-162PC-AN, Wireless motion detector with photo camera Anthracite
JA-162PC-AN, Wireless motion detector with photo camera Anthracite This device is a wireless part of the JABLOTRON system. It serves for the detection of human movements in the interior of buildings and visual alarm confirmation. The camera takes color photos with a resolution of up to 640x480 pixels. The camera is equipped with a visible flash to take photos in the dark. The images are stored in the internal memory of the detector and are then transferred to the control panel and from the control panel they can be sent to MyJABLOTRON or ARC. The detector can also take a photo on request. The detector occupies one position in the system and must be installed by a trained technician with a valid certificate issued by an authorized distributor. The photo verification can only be used after registering the system with MyJABLOTRON or with a subsequent ARC service. This device is compatible with control panels JA-103K, JA-107K, JA-102K and higher models. Specifications: Current 2x lithium battery type CR123A 3 V/1.5 Ah Typical battery life about 2 years (1 activation and 1 series of photos per day)Please note: batteries are not included LowBatt voltage ≤2.8V Quiescent current consumption 90 µA Maximum power consumption 700mA Communication frequency 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) 11mW Communication range approx. 300 m (unrestricted area) Recommended installation height 2.5 m above the floor PIR detection angle/detection coverage 90°/12 meters Horizontal camera shooting angle 90° Range of the flash maximum 3 meters Camera resolution LQ 320x240; HQ 640 x 480 pixels Photo format LQ/HQ 5–20 KB/5–64 KB Typical (LQ) photo transmission time to the control panel up to 20 s (10 s) Typical (HQ) photo transmission time to the control panel up to 130 s (60 s) Typical time for transferring photos to the server 15 seconds/GPRS; 2 seconds/LAN Dimensions, weight (without batteries) 150 x 65 x 44 mm, 130 grams Operational temperature range -10 °C to +40 °C Operational environment In general Average operational humidity 75% RH, without condensation Classification Safety class 2/Environmental class II (EN 50131-1) Certification Body Trezor Test No. 3025 Matches EN 50131-1, EN 50131-2-2, EN 50131-5-3, EN 50131-6, EN 55032, ETSI EN 300 220-1,-2, EN 62368-1, EN IEC 63000 Can be operated according to ERC/REC-70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)
€365,48
-
Jablotron JA-169P Wireless outdoor detector (dual detection)
Jablotron JA-169P Wireless outdoor detector (dual detection) The detector is designed to detect the movement of people in the outdoor environment. The optical part of the detector contains two PIR sensors with AND logic. An alarm signal will only occur if both detection zones are crossed simultaneously. The detector is equipped with a anti-mask function - protection against blinding/tampering of the detector and also has two built-in tampers (front and back). They immediately report the opening of the detector or an attempt to do so. The detector has a periodic self-test function and sends its status to the control panel. Power supply 1x lithium battery type CR123A (3.0 V / 1.4 Ah) Battery life approx. 3 years Maximum power consumption 55mA communication frequency: 868.1 MHz, JABLOTRON protocol Maximum radio frequency output (ERP) 25mW Communication range: approx. 300 m Environment outside general Ingress Protection Code IP45 Operating temperature range: -25 °C to +60 °C Dimensions 189 x 81 x 98 mm Weight (without battery) 380 grams Detection features: 15 m / 85°, 11 segments
€389,00
-
Jablotron JA-162PB-GR, PIR motion detector with wireless glass break sensor, Gray
JA-162PB-GR, PIR motion detector with wireless glass break sensor, Gray This device is part of the JABLOTRON system. It is used for the detection of movement in the interior of buildings and for the detection of breaking windows. This detector combines two sensors (PIR motion and BMS acoustics) in one housing. The detector occupies two positions in the system. Specifications: Nutrition 2x Lithium battery CR123A (3.0 V/1.5 Ah) Warning batteries are not included. Battery life approx. 3 years Low battery voltage Nominal current draw 50 uA Maximum current draw 50 mA Communication tape 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) RF range 500 m (open area) Recommended installation height 2.5 m above the floor PIR detection angle/range 90°/12 m BMS detection angle/range 90°/9 m Dimensions 150 x 63 x 40mm Weight (without batteries) 135 g Classification Security class 2/Environmental class II (according to EN 50131-1) General environment General Operating temperature range -10 °C to +40 °C Average operational humidity 75% RH, non-condensing Certification body Trezor Test s.r.o. (no. 3025) In accordance with ETSI EN 300 220-1.2, EN 50130-4, EN 55032, EN IEC 62368-1, EN IEC 63000, EN 50131-1, EN 50131-2-2, EN 50131-2-7-1, EN 50131-5-3, EN 50131-6 Can be operated according to ERC REC 70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)
€204,36
-
Jablotron JA-162PC-GR, Wireless motion detector with photo camera Gray
JA-162PC-GR, Wireless motion detector with photo camera Gray This device is a wireless part of the JABLOTRON system. It serves for the detection of human movements in the interior of buildings and visual alarm confirmation. The camera takes color photos with a resolution of up to 640x480 pixels. The camera is equipped with a visible flash to take photos in the dark. The images are stored in the internal memory of the detector and are then transferred to the control panel and from the control panel they can be sent to MyJABLOTRON or ARC. The detector can also take a photo on request. The detector occupies one position in the system and must be installed by a trained technician with a valid certificate issued by an authorized distributor. The photo verification can only be used after registering the system with MyJABLOTRON or with a subsequent ARC service. This device is compatible with control panels JA-103K, JA-107K, JA-102K and higher models. Specifications: Current 2x lithium battery type CR123A 3 V/1.5 Ah Typical battery life about 2 years (1 activation and 1 series of photos per day)Please note: batteries are not included LowBatt voltage ≤2.8V Quiescent current consumption 90 µA Maximum power consumption 700mA Communication frequency 868.1 MHz, JABLOTRON protocol Maximum radio frequency power (ERP) 11mW Communication range approx. 300 m (unrestricted area) Recommended installation height 2.5 m above the floor PIR detection angle/detection coverage 90°/12 meters Horizontal camera shooting angle 90° Range of the flash maximum 3 meters Camera resolution LQ 320x240; HQ 640 x 480 pixels Photo format LQ/HQ 5–20 KB/5–64 KB Typical (LQ) photo transmission time to the control panel up to 20 s (10 s) Typical (HQ) photo transmission time to the control panel up to 130 s (60 s) Typical time for transferring photos to the server 15 seconds/GPRS; 2 seconds/LAN Dimensions, weight (without batteries) 150 x 65 x 44 mm, 130 grams Operational temperature range -10 °C to +40 °C Operational environment In general Average operational humidity 75% RH, without condensation Classification Safety class 2/Environmental class II (EN 50131-1) Certification Body Trezor Test No. 3025 Matches EN 50131-1, EN 50131-2-2, EN 50131-5-3, EN 50131-6, EN 55032, ETSI EN 300 220-1,-2, EN 62368-1, EN IEC 63000 Can be operated according to ERC/REC-70-03 Recommended screw 2 x ø 3.5 x 40 mm (countersunk head)
€365,48
-
Jablotron JA-162PW-GR, Wireless Designline Dual MW PIR
JA-162PW-GR, Wireless Designline Dual MW PIR This product is a wireless device of the JABLOTRON 100+ system. This detector is designed to detect human body movements in buildings. High immunity against false alarms is achieved thanks to the combination of PIR and microwave (MW) detection. The detector works like a classic PIR detector, but if the PIR detects movement in a monitored area, the MW part activates and confirms the previous PIR activation. Specifications:Power source 2 lithium batteries, type CR123A (3 V/1500 mAh); batteries are not included Typical battery life 4 years Low battery charge Quiescent current consumption 65 μA Maximum power consumption 50mA Communication tape 868.1 MHz, JABLOTRON protocol Maximum MW radio frequency power (Effective Radiated Power – ERP) 25mW Communication range approx. 300 m (open space) Recommended installation height 2.2 – 2.5 m above floor level Detection angle/PIR coverage 90°/12 m Detection angle/MW coverage 80°/12 m MW frequency 24.125 GHz Maximum MW radio frequency power (Effective Radiated Power – ERP) 30 mW Sizes 150 x 63 x 40mm Weight (without batteries) 125 g Classification Safety grade 2/Environmental class II (according to EN 50131-1) Operational temperature range -10 °C to +40 °C Average operational humidity 75% relative humidity, no condensation Certification body Trezor Test s.r.o. (no. 3025) In accordance with ETSI EN 300 440, EN 50130-4, EN 55032, EN 62368-1, EN 50581, EN 50131-1, EN 50131-2-4 Operating conditions according to general authorization ERC REC 70-03
€199,35
-
Jablotron JA-116E-AN, Wired BUS Touchscreen, RFID reader, Anthracite
The YES 116E-AN is a modern BUS touchscreen keypad module with integrated RFID reader, designed for use within the Jablotron security system. The suffix “AN” indicates the anthracite (dark gray) color variant. This device is intended for indoor use and acts as a user-friendly interface for controlling an alarm system, allowing users to arm or disarm via touchscreen or RFID tag/chip. Device type: BUS touchscreen keypad with integrated RFID reader Color: Anthracite (AN variant) Display: 5″ color touchscreen with virtual keys RFID reader: 125 kHz, compatible with Jablotron RFID tags and cards Connection: BUS connection (wired, 4-wire) Supply voltage: 12 V DC (range 8–15 V) Power consumption: In idle (display off): approx. 85 mA Maximum (for cable sizing): up to 250 mA For backup calculation: 40 mA Dimensions: 95 × 183 × 30 mm (h × w × d) Weight: approx. 248 g Environment: Temperature range: –10 °C to +40 °C Relative humidity: max. 75% (without condensation) For indoor use only Security level: EN 50131-1, Security Grade 2 / Environmental Class II Certifications: EN 50131-1, EN 50131-3 EN 55032, EN 50130-4 EN IEC 62368-1, ETSI EN 300 330 Compatibility: Works with Jablotron control panels JA-103K and JA-107K Fully integrateable into the JA-100 system Installation: Attachment to mounting plate with locking mechanism Equipped with tamper contact (tamper) Installation only by certified installer Operation: via touchscreen or RFID tag/card Usage: arm/disarm system, operate zones, show status Application: indoor control of alarm systems in homes and business premises
€309,00
-
Jablotron JA-113A-BASE-RB BUS external siren base
General Type: JA‑113A‑BASE-RB (bus external siren basic module) Function: Basic unit for communication with the control panel and a number of internal functionalities such as tamper detection, can be combined with optional covers for acoustic and optical alarm display Technical specifications Connection: 12 V DC via BUS system (range 8–15 V) with average current consumption approx. 2.5 mA (stand-by) up to max. 450 mA Backup battery (optional, not included as standard): NiMH 4.8 V / 1,800 mAh (BAT‑4V8‑LH1800) with typical service life approx. 5 years. Low voltage detection Siren output: piezo element with ~100 dB at 1 m (hanging new battery) Dimensions & weight Dimensions: 200 × 300 × 72 mm (with JA-1X1A-C cover) or 200 × 300 × 62 mm (with JA-1X2A-C cover) Weight: ± 413 g without battery Environmental and certification Use: for outdoor installation, ambient temperature from −25 °C to +60 °C and humidity up to ~75 % RH without condensation Security class: Grade 2 / environmental class IV according to EN 50131‑1, EN 50131‑4 certification. Installation Assembly: use two screws through mounting holes, built-in spirit level for accurate alignment Bus connection: always install with the power off, guide the cable through the appropriate opening and secure it with clips Tamper surveillance: sensor detects opening of the front cover — automatic calibration after installation, closure must be complete to avoid error messages Compatibility System compatibility: works with JABLOTRON 100 and 100+ control panels such as JA-102K, JA-103K and JA-107K Required cover: becomes the basic unit supplied without cover; these must be purchased separately. Available COVERS: JA‑1X2A‑C‑WH (white plastic, transparent flash) JA‑1X2A‑C‑GR (gray plastic) JA‑1X2A‑C‑AN (anthracite plastic) JA‑1X1A‑C‑ST (red LED on stainless steel) JA‑1X1A‑C‑ST‑B (blue LED on stainless steel)
€127,05
-
Jablotron JA-122E BUS outdoor access module with RFID
Jablotron JA-122E BUS outdoor access module with RFIDThe Jablotron JA-122E BUS outdoor access module with RFID can be used to activate a PG output that allows local control of, for example, an electric lock. The module has a section with RFID to read a card or tag and optical status indication.Product Info
€198,06
-
Jablotron JA-116H BUS expander - 16 inputs
Jablotron JA-116H BUS expander - 16 inputsThe Bus expander is an expansion module used to drive and connect up to 16 sensors with contact outputs . This extension makes it possible to connect Jablotron and non-Jablotron related products such as infrared sensors, fire detectors or other detectors. This module can be installed directly in the control panel housing (JA-101K(R) and JA-106k(R).
€202,41
-
Jablotron JA-123E-NFC BUS outdoor access module with RFID and keypad
Jablotron JA-123E-NFC BUS outdoor access module with RFID and keypad The Jablotron JA-123E-NFC BUS outdoor access module with RFID 13.56Mhz (Mifare) and keyboard can be used to activate a PG output with which you can use local control of, for example, an electric lock or the security system. This module works with the JA-103 and JA-107 control panel. Main features: Control panel bus power, 12 V, DC (8-15 V) Quiescent current consumption 15mA Maximum power consumption 80mA Control device type 13.56 MHz Maximum RFID magnetic field strength 10.37 dBuA/m (3 m) Compatible RFID card NFC, Mifare® Classic, Mifare® DESFire® 4, 7-byte UID Dimensions 46x151.5x25mm Weight 196 grams Length of the connection cable 3.0 meters Operating temperature range -25 °C to +60 °C Relative humidity 75% without condensation Environment according to IV. Outside general Classification Grade 2 according to EN 50131-1, EN 50131-3 Additionally in accordance with ETSI EN 300330, EN 50130-4, EN 55032, EN 62368-1, EN IEC 63000
€218,91
-
Jablotron JA-150P Wireless mini PIR
Jablotron JA-150P Wireless mini PIRThe Jablotron JA-150P is a PIR motion detector designed for indoor protection. It detects movement with a human body temperature. The detection properties can be adjusted through the use of lenses such as: JS-7904 corridor lens, JS-7906 horizontal PET lens and the JS-7901 vertical curtain lens. The immunity level is adjustable and has two different levels. It is powered by two alkaline batteries. Implemented SMARTWATCH function for improved alarm reporting and energy saving for battery life. It is possible to assign the detector to a zone and it only occupies one position in the alarm system.Product Info
€123,44
You have 840 of the 1980 products seen